upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
147 lines
4.4 KiB
147 lines
4.4 KiB
/*
|
|
* (C) Copyright 2011
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Lei Wen <leiwen@marvell.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* This file should be included in board config header file.
|
|
*
|
|
* It supports common definitions for Kirkwood platform
|
|
*/
|
|
|
|
#ifndef _KW_CONFIG_H
|
|
#define _KW_CONFIG_H
|
|
|
|
#if defined (CONFIG_KW88F6281)
|
|
#include <asm/arch/kw88f6281.h>
|
|
#elif defined (CONFIG_KW88F6192)
|
|
#include <asm/arch/kw88f6192.h>
|
|
#else
|
|
#error "SOC Name not defined"
|
|
#endif /* CONFIG_KW88F6281 */
|
|
|
|
#define CONFIG_ARM926EJS 1 /* Basic Architecture */
|
|
|
|
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
|
|
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
|
|
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
|
|
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */
|
|
|
|
/*
|
|
* By default kwbimage.cfg from board specific folder is used
|
|
* If for some board, different configuration file need to be used,
|
|
* CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
|
|
*/
|
|
#ifndef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
|
|
#endif /* CONFIG_SYS_KWD_CONFIG */
|
|
|
|
/* Kirkwood has 2k of Security SRAM, use it for SP */
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000
|
|
#define CONFIG_NR_DRAM_BANKS_MAX 2
|
|
|
|
#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE
|
|
#define MV_UART_CONSOLE_BASE KW_UART0_BASE
|
|
#define MV_SATA_BASE KW_SATA_BASE
|
|
#define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET
|
|
#define MV_SATA_PORT1_OFFSET KW_SATA_PORT1_OFFSET
|
|
|
|
/*
|
|
* NAND configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_KIRKWOOD
|
|
#define CONFIG_SYS_NAND_BASE 0xD8000000 /* MV_DEFADR_NANDF */
|
|
#define NAND_ALLOW_ERASE_ALL 1
|
|
#endif
|
|
|
|
/*
|
|
* SPI Flash configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_SF
|
|
#define CONFIG_HARD_SPI 1
|
|
#define CONFIG_KIRKWOOD_SPI 1
|
|
#define CONFIG_ENV_SPI_BUS 0
|
|
#define CONFIG_ENV_SPI_CS 0
|
|
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /*50Mhz */
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
|
#define CONFIG_NET_MULTI /* specify more that one ports available */
|
|
#define CONFIG_MII /* expose smi ove miiphy interface */
|
|
#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
|
|
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
|
|
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
|
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
/*
|
|
* USB/EHCI
|
|
*/
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_EHCI_KIRKWOOD
|
|
#define CONFIG_EHCI_IS_TDI
|
|
#endif /* CONFIG_CMD_USB */
|
|
|
|
/*
|
|
* IDE Support on SATA ports
|
|
*/
|
|
#ifdef CONFIG_CMD_IDE
|
|
#define __io
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_MVSATA_IDE
|
|
#define CONFIG_IDE_PREINIT
|
|
#define CONFIG_MVSATA_IDE_USE_PORT1
|
|
/* Needs byte-swapping for ATA data register */
|
|
#define CONFIG_IDE_SWAP_IO
|
|
/* Data, registers and alternate blocks are at the same offset */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100)
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (0x0100)
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100)
|
|
/* Each 8-bit ATA register is aligned to a 4-bytes address */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
/* Controller supports 48-bits LBA addressing */
|
|
#define CONFIG_LBA48
|
|
/* CONFIG_CMD_IDE requires some #defines for ATA registers */
|
|
#define CONFIG_SYS_IDE_MAXBUS 2
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2
|
|
/* ATA registers base is at SATA controller base */
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE
|
|
#endif /* CONFIG_CMD_IDE */
|
|
|
|
/*
|
|
* I2C related stuff
|
|
*/
|
|
#ifdef CONFIG_CMD_I2C
|
|
#ifndef CONFIG_SOFT_I2C
|
|
#define CONFIG_I2C_MVTWSI
|
|
#endif
|
|
#define CONFIG_SYS_I2C_SLAVE 0x0
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#endif
|
|
|
|
#endif /* _KW_CONFIG_H */
|
|
|