upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
103 lines
3.2 KiB
103 lines
3.2 KiB
/*
|
|
* Copyright (c) 2006-2007 Analog Devices Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
|
|
#include <nand.h>
|
|
|
|
#define CONCAT(a,b,c,d) a ## b ## c ## d
|
|
#define PORT(a,b) CONCAT(pPORT,a,b,)
|
|
|
|
#ifndef CONFIG_NAND_GPIO_PORT
|
|
#define CONFIG_NAND_GPIO_PORT F
|
|
#endif
|
|
|
|
/*
|
|
* hardware specific access to control-lines
|
|
*/
|
|
static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
register struct nand_chip *this = mtd->priv;
|
|
u32 IO_ADDR_W = (u32) this->IO_ADDR_W;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if (ctrl & NAND_CLE)
|
|
IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
|
|
else
|
|
IO_ADDR_W = CONFIG_SYS_NAND_BASE;
|
|
if (ctrl & NAND_ALE)
|
|
IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
|
|
else
|
|
IO_ADDR_W = CONFIG_SYS_NAND_BASE;
|
|
this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
|
|
}
|
|
this->IO_ADDR_R = this->IO_ADDR_W;
|
|
|
|
/* Drain the writebuffer */
|
|
SSYNC();
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W);
|
|
}
|
|
|
|
int bfin_device_ready(struct mtd_info *mtd)
|
|
{
|
|
int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0;
|
|
SSYNC();
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Board-specific NAND initialization. The following members of the
|
|
* argument are board-specific (per include/linux/mtd/nand.h):
|
|
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
|
|
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
|
|
* - cmd_ctrl: hardwarespecific function for accesing control-lines
|
|
* - dev_ready: hardwarespecific function for accesing device ready/busy line
|
|
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
|
|
* only be provided if a hardware ECC is available
|
|
* - ecc.mode: mode of ecc, see defines
|
|
* - chip_delay: chip dependent delay for transfering data from array to
|
|
* read regs (tR)
|
|
* - options: various chip options. They can partly be set to inform
|
|
* nand_scan about special functionality. See the defines for further
|
|
* explanation
|
|
* Members with a "?" were not set in the merged testing-NAND branch,
|
|
* so they are not set here either.
|
|
*/
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
*PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
|
|
*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
|
|
*PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
|
|
|
|
nand->cmd_ctrl = bfin_hwcontrol;
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
nand->dev_ready = bfin_device_ready;
|
|
nand->chip_delay = 30;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|