upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/tegra20-common.h

97 lines
3.0 KiB

/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA20_COMMON_H_
#define _TEGRA20_COMMON_H_
#include "tegra-common.h"
/*
* Errata configuration
*/
#define CONFIG_ARM_ERRATA_716044
#define CONFIG_ARM_ERRATA_742230
#define CONFIG_ARM_ERRATA_751472
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
/*
* Miscellaneous configurable options
*/
#define CONFIG_STACKBASE 0x02800000 /* 40MB */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_SYS_TEXT_BASE 0x00110000
/*
* Memory layout for where various images get loaded by boot scripts:
*
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* pxefile_addr_r can be pretty much anywhere that doesn't conflict with
* something else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
* should not overlap that area, or the kernel will have to copy itself
* somewhere else before decompression. Similarly, the address of any other
* data passed to the kernel shouldn't overlap the start of RAM. Pushing
* this up to 16M allows for a sizable kernel to be decompressed below the
* compressed load address.
*
* fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
* the compressed kernel to be up to 16M too.
*
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
#define CONFIG_LOADADDR 0x01000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x10000000\0" \
"pxefile_addr_r=0x10100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdt_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x02100000\0"
/* Defines for SPL */
#define CONFIG_SPL_TEXT_BASE 0x00108000
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SPL_STACK 0x000ffffc
/* Align LCD to 1MB boundary */
#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
#ifdef CONFIG_TEGRA_LP0
#define TEGRA_LP0_ADDR 0x1C406000
#define TEGRA_LP0_SIZE 0x2000
#define TEGRA_LP0_VEC \
"lp0_vec=" __stringify(TEGRA_LP0_SIZE) \
"@" __stringify(TEGRA_LP0_ADDR) " "
#else
#define TEGRA_LP0_VEC
#endif
/*
* This parameter affects a TXFILLTUNING field that controls how much data is
* sent to the latency fifo before it is sent to the wire. Without this
* parameter, the default (2) causes occasional Data Buffer Errors in OUT
* packets depending on the buffer address and size.
*/
#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif /* _TEGRA20_COMMON_H_ */