upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/amcc/taihu/taihu.c

195 lines
4.3 KiB

/*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2005-2007
* Beijing UD Technology Co., Ltd., taihusupport@amcc.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <spi.h>
#include <netdev.h>
#include <asm/gpio.h>
extern int lcd_init(void);
/*
* board_early_init_f
*/
int board_early_init_f(void)
{
lcd_init();
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000);
mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
/*
* Configure CPC0_PCI to enable PerWE as output
* and enable the internal PCI arbiter
*/
mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
char *s = getenv("serial#");
puts("Board: Taihu - AMCC PPC405EP Evaluation Board");
if (s != NULL) {
puts(", serial# ");
puts(s);
}
putc('\n');
return 0;
}
static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
{
char stat;
int i;
stat = in_8((u8 *) CPLD_REG0_ADDR);
printf("SW2 status: ");
for (i=0; i<4; i++) /* 4-position */
printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off");
printf("\n");
return 0;
}
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
"show status of switch 2",
""
);
static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
{
int led_no;
if (argc != 3)
return cmd_usage(cmd_tp);
led_no = simple_strtoul(argv[1], NULL, 16);
if (led_no != 1 && led_no != 2)
return cmd_usage(cmd_tp);
if (strcmp(argv[2],"off") == 0x0) {
if (led_no == 1)
gpio_write_bit(30, 1);
else
gpio_write_bit(31, 1);
} else if (strcmp(argv[2],"on") == 0x0) {
if (led_no == 1)
gpio_write_bit(30, 0);
else
gpio_write_bit(31, 0);
} else {
return cmd_usage(cmd_tp);
}
return 0;
}
U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
"make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2"
);
#define SPI_CS_GPIO0 0
#define SPI_SCLK_GPIO14 14
#define SPI_DIN_GPIO15 15
#define SPI_DOUT_GPIO16 16
void spi_scl(int bit)
{
gpio_write_bit(SPI_SCLK_GPIO14, bit);
}
void spi_sda(int bit)
{
gpio_write_bit(SPI_DOUT_GPIO16, bit);
}
unsigned char spi_read(void)
{
return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
gpio_write_bit(SPI_CS_GPIO0, 1);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
gpio_write_bit(SPI_CS_GPIO0, 0);
}
#ifdef CONFIG_PCI
static unsigned char int_lines[32] = {
29, 30, 27, 28, 29, 30, 25, 27,
29, 30, 27, 28, 29, 30, 27, 28,
29, 30, 27, 28, 29, 30, 27, 28,
29, 30, 27, 28, 29, 30, 27, 28};
static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
unsigned char int_line = int_lines[PCI_DEV(dev) & 31];
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
}
int pci_pre_init(struct pci_controller *hose)
{
hose->fixup_irq = taihu_pci_fixup_irq;
return 1;
}
#endif /* CONFIG_PCI */
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis);
return pci_eth_init(bis);
}