upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
131 lines
3.2 KiB
131 lines
3.2 KiB
/*
|
|
* AU1X00 UART support
|
|
*
|
|
* Hardcoded to UART 0 for now
|
|
* Speed and options also hardcoded to 115200 8N1
|
|
*
|
|
* Copyright (c) 2003 Thomas.Lange@corelatus.se
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/au1x00.h>
|
|
|
|
/******************************************************************************
|
|
*
|
|
* serial_init - initialize a channel
|
|
*
|
|
* This routine initializes the number of data bits, parity
|
|
* and set the selected baud rate. Interrupts are disabled.
|
|
* Set the modem control signals if the option is selected.
|
|
*
|
|
* RETURNS: N/A
|
|
*/
|
|
|
|
int serial_init (void)
|
|
{
|
|
volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
|
|
volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
|
|
|
|
/* Enable clocks first */
|
|
*uart_enable = UART_EN_CE;
|
|
|
|
/* Then release reset */
|
|
/* Must release reset before setting other regs */
|
|
*uart_enable = UART_EN_CE|UART_EN_E;
|
|
|
|
/* Activate fifos, reset tx and rx */
|
|
/* Set tx trigger level to 12 */
|
|
*uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
|
|
UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
|
|
|
|
serial_setbrg();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
void serial_setbrg (void)
|
|
{
|
|
volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
|
|
volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
|
|
volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
|
|
int sd;
|
|
int divisorx2;
|
|
|
|
/* sd is system clock divisor */
|
|
/* see section 10.4.5 in au1550 datasheet */
|
|
sd = (*sys_powerctrl & 0x03) + 2;
|
|
|
|
/* calulate 2x baudrate and round */
|
|
divisorx2 = ((CFG_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
|
|
|
|
if (divisorx2 & 0x01)
|
|
divisorx2 = divisorx2 + 1;
|
|
|
|
*uart_clk = divisorx2 / 2;
|
|
|
|
/* Set parity, stop bits and word length to 8N1 */
|
|
*uart_lcr = UART_LCR_WLEN8;
|
|
}
|
|
|
|
void serial_putc (const char c)
|
|
{
|
|
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
|
|
volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
|
|
|
|
if (c == '\n') serial_putc ('\r');
|
|
|
|
/* Wait for fifo to shift out some bytes */
|
|
while((*uart_lsr&UART_LSR_THRE)==0);
|
|
|
|
*uart_tx = (u32)c;
|
|
}
|
|
|
|
void serial_puts (const char *s)
|
|
{
|
|
while (*s)
|
|
{
|
|
serial_putc (*s++);
|
|
}
|
|
}
|
|
|
|
int serial_getc (void)
|
|
{
|
|
volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
|
|
char c;
|
|
|
|
while (!serial_tstc());
|
|
|
|
c = (*uart_rx&0xFF);
|
|
return c;
|
|
}
|
|
|
|
int serial_tstc (void)
|
|
{
|
|
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
|
|
|
|
if(*uart_lsr&UART_LSR_DR){
|
|
/* Data in rfifo */
|
|
return(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|