upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
279 lines
7.2 KiB
279 lines
7.2 KiB
/*
|
|
* U-Boot - Configuration file for BF537 STAMP board
|
|
*/
|
|
|
|
#ifndef __CONFIG_BF537_STAMP_H__
|
|
#define __CONFIG_BF537_STAMP_H__
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf537-0.2
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 25000000
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 20
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 4
|
|
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 10
|
|
#define CONFIG_MEM_SIZE 64
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x306
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
|
|
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#ifndef __ADSPBF534__
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_BFIN_MAC
|
|
#define CONFIG_NETCONSOLE 1
|
|
#endif
|
|
#define CONFIG_HOSTNAME bf537-stamp
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 71
|
|
|
|
|
|
/*
|
|
* SPI Settings
|
|
*/
|
|
#define CONFIG_BFIN_SPI
|
|
#define CONFIG_ENV_SPI_MAX_HZ 30000000
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
#define CONFIG_SPI_FLASH_ALL
|
|
|
|
|
|
/*
|
|
* Env Storage Settings
|
|
*/
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x10000
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#endif
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
|
#define ENV_IS_EMBEDDED
|
|
#else
|
|
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
|
|
#endif
|
|
#ifdef ENV_IS_EMBEDDED
|
|
/* WARNING - the following is hand-optimized to fit within
|
|
* the sector before the environment sector. If it throws
|
|
* an error during compilation remove an object here to get
|
|
* it linked after the configuration sector.
|
|
*/
|
|
# define LDS_BOARD_TEXT \
|
|
arch/blackfin/lib/built-in.o (.text*); \
|
|
arch/blackfin/cpu/built-in.o (.text*); \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
common/env_embedded.o (.text*);
|
|
#endif
|
|
|
|
|
|
/*
|
|
* I2C Settings
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_ADI
|
|
|
|
|
|
/*
|
|
* SPI_MMC Settings
|
|
*/
|
|
#define CONFIG_MMC_SPI
|
|
#ifdef CONFIG_MMC_SPI
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#endif
|
|
|
|
/*
|
|
* NAND Settings
|
|
*/
|
|
/* #define CONFIG_NAND_PLAT */
|
|
#ifdef CONFIG_NAND_PLAT
|
|
#define CONFIG_SYS_NAND_BASE 0x20212000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
|
|
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
|
|
#define BFIN_NAND_WRITE(addr, cmd) \
|
|
do { \
|
|
bfin_write8(addr, cmd); \
|
|
SSYNC(); \
|
|
} while (0)
|
|
|
|
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
|
|
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
|
|
#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3
|
|
#endif /* CONFIG_NAND_PLAT */
|
|
|
|
/*
|
|
* CF-CARD IDE-HDD Support
|
|
*/
|
|
|
|
/*
|
|
* Add CF flash card support in TRUE-IDE Mode (CF-IDE-NAND Card)
|
|
* Strange address mapping Blackfin A13 connects to CF_A0
|
|
*/
|
|
|
|
/* #define CONFIG_BFIN_TRUE_IDE */
|
|
|
|
/*
|
|
* Add CF flash card support in Common Memory Mode (CF-IDE-NAND Card)
|
|
* This should be the preferred mode
|
|
*/
|
|
|
|
/* #define CONFIG_BFIN_CF_IDE */
|
|
|
|
/*
|
|
* Add IDE Disk Drive (HDD) support
|
|
* See example interface here:
|
|
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:ide-blackfin
|
|
*/
|
|
|
|
/* #define CONFIG_BFIN_HDD_IDE */
|
|
|
|
#if defined(CONFIG_BFIN_CF_IDE) || \
|
|
defined(CONFIG_BFIN_HDD_IDE) || \
|
|
defined(CONFIG_BFIN_TRUE_IDE)
|
|
# define CONFIG_BFIN_IDE 1
|
|
# define CONFIG_CMD_IDE
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_IDE)
|
|
|
|
#define CONFIG_DOS_PARTITION 1
|
|
/*
|
|
* IDE/ATA stuff
|
|
*/
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1)
|
|
|
|
#undef CONFIG_EBIU_AMBCTL1_VAL
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC3FFC3
|
|
|
|
#define CONFIG_CF_ATASEL_DIS 0x20311800
|
|
#define CONFIG_CF_ATASEL_ENA 0x20311802
|
|
|
|
#if defined(CONFIG_BFIN_TRUE_IDE)
|
|
/*
|
|
* Note that these settings aren't for the most part used in include/ata.h
|
|
* when all of the ATA registers are setup
|
|
*/
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x2031C000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A13 */
|
|
|
|
#elif defined(CONFIG_BFIN_CF_IDE)
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20211800
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x000E /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 1 /* CF_A0=0, with /CE1 /CE2 odd/even byte selects */
|
|
|
|
#elif defined(CONFIG_BFIN_HDD_IDE)
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20314000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */
|
|
#undef CONFIG_SCLK_DIV
|
|
#define CONFIG_SCLK_DIV 8
|
|
#endif
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_RTC_BFIN
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
/* Define if want to do post memory test */
|
|
#undef CONFIG_POST
|
|
#ifdef CONFIG_POST
|
|
#define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5
|
|
#define CONFIG_POST_BSPEC1_GPIO_LEDS \
|
|
GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
|
|
#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
|
|
GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
|
|
#define CONFIG_POST_BSPEC2_GPIO_NAMES \
|
|
10, 11, 12, 13,
|
|
#define CONFIG_SYS_POST_FLASH_START 11
|
|
#define CONFIG_SYS_POST_FLASH_END 71
|
|
#endif
|
|
|
|
/* These are for board tests */
|
|
#if 0
|
|
#define CONFIG_BOOTCOMMAND "bootldr 0x203f0100"
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#endif
|
|
|