upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1214 lines
34 KiB
1214 lines
34 KiB
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "ddr3_hw_training.h"
|
|
|
|
/*
|
|
* Debug
|
|
*/
|
|
#define DEBUG_RL_C(s, d, l) \
|
|
DEBUG_RL_S(s); DEBUG_RL_D(d, l); DEBUG_RL_S("\n")
|
|
#define DEBUG_RL_FULL_C(s, d, l) \
|
|
DEBUG_RL_FULL_S(s); DEBUG_RL_FULL_D(d, l); DEBUG_RL_FULL_S("\n")
|
|
|
|
#ifdef MV_DEBUG_RL
|
|
#define DEBUG_RL_S(s) \
|
|
debug_cond(ddr3_get_log_level() >= MV_LOG_LEVEL_2, "%s", s)
|
|
#define DEBUG_RL_D(d, l) \
|
|
debug_cond(ddr3_get_log_level() >= MV_LOG_LEVEL_2, "%x", d)
|
|
#else
|
|
#define DEBUG_RL_S(s)
|
|
#define DEBUG_RL_D(d, l)
|
|
#endif
|
|
|
|
#ifdef MV_DEBUG_RL_FULL
|
|
#define DEBUG_RL_FULL_S(s) puts(s)
|
|
#define DEBUG_RL_FULL_D(d, l) printf("%x", d)
|
|
#else
|
|
#define DEBUG_RL_FULL_S(s)
|
|
#define DEBUG_RL_FULL_D(d, l)
|
|
#endif
|
|
|
|
extern u32 rl_pattern[LEN_STD_PATTERN];
|
|
|
|
#ifdef RL_MODE
|
|
static int ddr3_read_leveling_single_cs_rl_mode(u32 cs, u32 freq,
|
|
int ratio_2to1, u32 ecc,
|
|
MV_DRAM_INFO *dram_info);
|
|
#else
|
|
static int ddr3_read_leveling_single_cs_window_mode(u32 cs, u32 freq,
|
|
int ratio_2to1, u32 ecc,
|
|
MV_DRAM_INFO *dram_info);
|
|
#endif
|
|
|
|
/*
|
|
* Name: ddr3_read_leveling_hw
|
|
* Desc: Execute the Read leveling phase by HW
|
|
* Args: dram_info - main struct
|
|
* freq - current sequence frequency
|
|
* Notes:
|
|
* Returns: MV_OK if success, MV_FAIL if fail.
|
|
*/
|
|
int ddr3_read_leveling_hw(u32 freq, MV_DRAM_INFO *dram_info)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Debug message - Start Read leveling procedure */
|
|
DEBUG_RL_S("DDR3 - Read Leveling - Starting HW RL procedure\n");
|
|
|
|
/* Start Auto Read Leveling procedure */
|
|
reg = 1 << REG_DRAM_TRAINING_RL_OFFS;
|
|
/* Config the retest number */
|
|
reg |= (COUNT_HW_RL << REG_DRAM_TRAINING_RETEST_OFFS);
|
|
|
|
/* Enable CS in the automatic process */
|
|
reg |= (dram_info->cs_ena << REG_DRAM_TRAINING_CS_OFFS);
|
|
|
|
reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */
|
|
|
|
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) |
|
|
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
|
|
reg_write(REG_DRAM_TRAINING_SHADOW_ADDR, reg);
|
|
|
|
/* Wait */
|
|
do {
|
|
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) &
|
|
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
|
|
} while (reg); /* Wait for '0' */
|
|
|
|
/* Check if Successful */
|
|
if (reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) &
|
|
(1 << REG_DRAM_TRAINING_ERROR_OFFS)) {
|
|
u32 delay, phase, pup, cs;
|
|
|
|
dram_info->rl_max_phase = 0;
|
|
dram_info->rl_min_phase = 10;
|
|
|
|
/* Read results to arrays */
|
|
for (cs = 0; cs < MAX_CS; cs++) {
|
|
if (dram_info->cs_ena & (1 << cs)) {
|
|
for (pup = 0;
|
|
pup < dram_info->num_of_total_pups;
|
|
pup++) {
|
|
if (pup == dram_info->num_of_std_pups
|
|
&& dram_info->ecc_ena)
|
|
pup = ECC_PUP;
|
|
reg =
|
|
ddr3_read_pup_reg(PUP_RL_MODE, cs,
|
|
pup);
|
|
phase = (reg >> REG_PHY_PHASE_OFFS) &
|
|
PUP_PHASE_MASK;
|
|
delay = reg & PUP_DELAY_MASK;
|
|
dram_info->rl_val[cs][pup][P] = phase;
|
|
if (phase > dram_info->rl_max_phase)
|
|
dram_info->rl_max_phase = phase;
|
|
if (phase < dram_info->rl_min_phase)
|
|
dram_info->rl_min_phase = phase;
|
|
dram_info->rl_val[cs][pup][D] = delay;
|
|
dram_info->rl_val[cs][pup][S] =
|
|
RL_FINAL_STATE;
|
|
reg =
|
|
ddr3_read_pup_reg(PUP_RL_MODE + 0x1,
|
|
cs, pup);
|
|
dram_info->rl_val[cs][pup][DQS] =
|
|
(reg & 0x3F);
|
|
}
|
|
#ifdef MV_DEBUG_RL
|
|
/* Print results */
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Results for CS - ",
|
|
(u32) cs, 1);
|
|
|
|
for (pup = 0;
|
|
pup < (dram_info->num_of_total_pups);
|
|
pup++) {
|
|
if (pup == dram_info->num_of_std_pups
|
|
&& dram_info->ecc_ena)
|
|
pup = ECC_PUP;
|
|
DEBUG_RL_S("DDR3 - Read Leveling - PUP: ");
|
|
DEBUG_RL_D((u32) pup, 1);
|
|
DEBUG_RL_S(", Phase: ");
|
|
DEBUG_RL_D((u32) dram_info->
|
|
rl_val[cs][pup][P], 1);
|
|
DEBUG_RL_S(", Delay: ");
|
|
DEBUG_RL_D((u32) dram_info->
|
|
rl_val[cs][pup][D], 2);
|
|
DEBUG_RL_S("\n");
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
dram_info->rd_rdy_dly =
|
|
reg_read(REG_READ_DATA_READY_DELAYS_ADDR) &
|
|
REG_READ_DATA_SAMPLE_DELAYS_MASK;
|
|
dram_info->rd_smpl_dly =
|
|
reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR) &
|
|
REG_READ_DATA_READY_DELAYS_MASK;
|
|
#ifdef MV_DEBUG_RL
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Read Sample Delay: ",
|
|
dram_info->rd_smpl_dly, 2);
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Read Ready Delay: ",
|
|
dram_info->rd_rdy_dly, 2);
|
|
DEBUG_RL_S("DDR3 - Read Leveling - HW RL Ended Successfully\n");
|
|
#endif
|
|
return MV_OK;
|
|
|
|
} else {
|
|
DEBUG_RL_S("DDR3 - Read Leveling - HW RL Error\n");
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Name: ddr3_read_leveling_sw
|
|
* Desc: Execute the Read leveling phase by SW
|
|
* Args: dram_info - main struct
|
|
* freq - current sequence frequency
|
|
* Notes:
|
|
* Returns: MV_OK if success, MV_FAIL if fail.
|
|
*/
|
|
int ddr3_read_leveling_sw(u32 freq, int ratio_2to1, MV_DRAM_INFO *dram_info)
|
|
{
|
|
u32 reg, cs, ecc, pup_num, phase, delay, pup;
|
|
int status;
|
|
|
|
/* Debug message - Start Read leveling procedure */
|
|
DEBUG_RL_S("DDR3 - Read Leveling - Starting SW RL procedure\n");
|
|
|
|
/* Enable SW Read Leveling */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
|
|
(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
|
|
reg &= ~(1 << REG_DRAM_TRAINING_2_RL_MODE_OFFS);
|
|
/* [0]=1 - Enable SW override */
|
|
/* 0x15B8 - Training SW 2 Register */
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
#ifdef RL_MODE
|
|
reg = (dram_info->cs_ena << REG_DRAM_TRAINING_CS_OFFS) |
|
|
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
|
|
reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */
|
|
#endif
|
|
|
|
/* Loop for each CS */
|
|
for (cs = 0; cs < dram_info->num_cs; cs++) {
|
|
DEBUG_RL_C("DDR3 - Read Leveling - CS - ", (u32) cs, 1);
|
|
|
|
for (ecc = 0; ecc <= (dram_info->ecc_ena); ecc++) {
|
|
/* ECC Support - Switch ECC Mux on ecc=1 */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
|
|
~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS);
|
|
reg |= (dram_info->ecc_ena *
|
|
ecc << REG_DRAM_TRAINING_2_ECC_MUX_OFFS);
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
if (ecc)
|
|
DEBUG_RL_S("DDR3 - Read Leveling - ECC Mux Enabled\n");
|
|
else
|
|
DEBUG_RL_S("DDR3 - Read Leveling - ECC Mux Disabled\n");
|
|
|
|
/* Set current sample delays */
|
|
reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK <<
|
|
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
|
|
reg |= (dram_info->cl <<
|
|
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
|
|
reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg);
|
|
|
|
/* Set current Ready delay */
|
|
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
reg |= ((dram_info->cl + 1) <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
} else {
|
|
/* 2:1 mode */
|
|
reg |= ((dram_info->cl + 2) <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
}
|
|
reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
|
|
|
|
/* Read leveling Single CS[cs] */
|
|
#ifdef RL_MODE
|
|
status =
|
|
ddr3_read_leveling_single_cs_rl_mode(cs, freq,
|
|
ratio_2to1,
|
|
ecc,
|
|
dram_info);
|
|
if (MV_OK != status)
|
|
return status;
|
|
#else
|
|
status =
|
|
ddr3_read_leveling_single_cs_window_mode(cs, freq,
|
|
ratio_2to1,
|
|
ecc,
|
|
dram_info)
|
|
if (MV_OK != status)
|
|
return status;
|
|
#endif
|
|
}
|
|
|
|
/* Print results */
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Results for CS - ", (u32) cs,
|
|
1);
|
|
|
|
for (pup = 0;
|
|
pup < (dram_info->num_of_std_pups + dram_info->ecc_ena);
|
|
pup++) {
|
|
DEBUG_RL_S("DDR3 - Read Leveling - PUP: ");
|
|
DEBUG_RL_D((u32) pup, 1);
|
|
DEBUG_RL_S(", Phase: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][P], 1);
|
|
DEBUG_RL_S(", Delay: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][D], 2);
|
|
DEBUG_RL_S("\n");
|
|
}
|
|
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Read Sample Delay: ",
|
|
dram_info->rd_smpl_dly, 2);
|
|
DEBUG_RL_C("DDR3 - Read Leveling - Read Ready Delay: ",
|
|
dram_info->rd_rdy_dly, 2);
|
|
|
|
/* Configure PHY with average of 3 locked leveling settings */
|
|
for (pup = 0;
|
|
pup < (dram_info->num_of_std_pups + dram_info->ecc_ena);
|
|
pup++) {
|
|
/* ECC support - bit 8 */
|
|
pup_num = (pup == dram_info->num_of_std_pups) ? ECC_BIT : pup;
|
|
|
|
/* For now, set last cnt result */
|
|
phase = dram_info->rl_val[cs][pup][P];
|
|
delay = dram_info->rl_val[cs][pup][D];
|
|
ddr3_write_pup_reg(PUP_RL_MODE, cs, pup_num, phase,
|
|
delay);
|
|
}
|
|
}
|
|
|
|
/* Reset PHY read FIFO */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
/* 0x15B8 - Training SW 2 Register */
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
do {
|
|
reg = (reg_read(REG_DRAM_TRAINING_2_ADDR)) &
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
} while (reg); /* Wait for '0' */
|
|
|
|
/* ECC Support - Switch ECC Mux off ecc=0 */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
|
|
~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS);
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
#ifdef RL_MODE
|
|
reg_write(REG_DRAM_TRAINING_ADDR, 0); /* 0x15B0 - Training Register */
|
|
#endif
|
|
|
|
/* Disable SW Read Leveling */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
|
|
~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
|
|
/* [0] = 0 - Disable SW override */
|
|
reg = (reg | (0x1 << REG_DRAM_TRAINING_2_RL_MODE_OFFS));
|
|
/* [3] = 1 - Disable RL MODE */
|
|
/* 0x15B8 - Training SW 2 Register */
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
DEBUG_RL_S("DDR3 - Read Leveling - Finished RL procedure for all CS\n");
|
|
return MV_OK;
|
|
}
|
|
|
|
#ifdef RL_MODE
|
|
/*
|
|
* overrun() extracted from ddr3_read_leveling_single_cs_rl_mode().
|
|
* This just got too much indented making it hard to read / edit.
|
|
*/
|
|
static void overrun(u32 cs, MV_DRAM_INFO *info, u32 pup, u32 locked_pups,
|
|
u32 *locked_sum, u32 ecc, int *first_octet_locked,
|
|
int *counter_in_progress, int final_delay, u32 delay,
|
|
u32 phase)
|
|
{
|
|
/* If no OverRun */
|
|
if (((~locked_pups >> pup) & 0x1) && (final_delay == 0)) {
|
|
int idx;
|
|
|
|
idx = pup + ecc * ECC_BIT;
|
|
|
|
/* PUP passed, start examining */
|
|
if (info->rl_val[cs][idx][S] == RL_UNLOCK_STATE) {
|
|
/* Must be RL_UNLOCK_STATE */
|
|
/* Match expected value ? - Update State Machine */
|
|
if (info->rl_val[cs][idx][C] < RL_RETRY_COUNT) {
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We have no overrun and a match on pup: ",
|
|
(u32)pup, 1);
|
|
info->rl_val[cs][idx][C]++;
|
|
|
|
/* If pup got to last state - lock the delays */
|
|
if (info->rl_val[cs][idx][C] == RL_RETRY_COUNT) {
|
|
info->rl_val[cs][idx][C] = 0;
|
|
info->rl_val[cs][idx][DS] = delay;
|
|
info->rl_val[cs][idx][PS] = phase;
|
|
|
|
/* Go to Final State */
|
|
info->rl_val[cs][idx][S] = RL_FINAL_STATE;
|
|
*locked_sum = *locked_sum + 1;
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We have locked pup: ",
|
|
(u32)pup, 1);
|
|
|
|
/*
|
|
* If first lock - need to lock delays
|
|
*/
|
|
if (*first_octet_locked == 0) {
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We got first lock on pup: ",
|
|
(u32)pup, 1);
|
|
*first_octet_locked = 1;
|
|
}
|
|
|
|
/*
|
|
* If pup is in not in final state but
|
|
* there was match - dont increment
|
|
* counter
|
|
*/
|
|
} else {
|
|
*counter_in_progress = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Name: ddr3_read_leveling_single_cs_rl_mode
|
|
* Desc: Execute Read leveling for single Chip select
|
|
* Args: cs - current chip select
|
|
* freq - current sequence frequency
|
|
* ecc - ecc iteration indication
|
|
* dram_info - main struct
|
|
* Notes:
|
|
* Returns: MV_OK if success, MV_FAIL if fail.
|
|
*/
|
|
static int ddr3_read_leveling_single_cs_rl_mode(u32 cs, u32 freq,
|
|
int ratio_2to1, u32 ecc,
|
|
MV_DRAM_INFO *dram_info)
|
|
{
|
|
u32 reg, delay, phase, pup, rd_sample_delay, add, locked_pups,
|
|
repeat_max_cnt, sdram_offset, locked_sum;
|
|
u32 phase_min, ui_max_delay;
|
|
int all_locked, first_octet_locked, counter_in_progress;
|
|
int final_delay = 0;
|
|
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - Single CS - ", (u32) cs, 1);
|
|
|
|
/* Init values */
|
|
phase = 0;
|
|
delay = 0;
|
|
rd_sample_delay = dram_info->cl;
|
|
all_locked = 0;
|
|
first_octet_locked = 0;
|
|
repeat_max_cnt = 0;
|
|
locked_sum = 0;
|
|
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc);
|
|
pup++)
|
|
dram_info->rl_val[cs][pup + ecc * ECC_BIT][S] = 0;
|
|
|
|
/* Main loop */
|
|
while (!all_locked) {
|
|
counter_in_progress = 0;
|
|
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - RdSmplDly = ");
|
|
DEBUG_RL_FULL_D(rd_sample_delay, 2);
|
|
DEBUG_RL_FULL_S(", RdRdyDly = ");
|
|
DEBUG_RL_FULL_D(dram_info->rd_rdy_dly, 2);
|
|
DEBUG_RL_FULL_S(", Phase = ");
|
|
DEBUG_RL_FULL_D(phase, 1);
|
|
DEBUG_RL_FULL_S(", Delay = ");
|
|
DEBUG_RL_FULL_D(delay, 2);
|
|
DEBUG_RL_FULL_S("\n");
|
|
|
|
/*
|
|
* Broadcast to all PUPs current RL delays: DQS phase,
|
|
* leveling delay
|
|
*/
|
|
ddr3_write_pup_reg(PUP_RL_MODE, cs, PUP_BC, phase, delay);
|
|
|
|
/* Reset PHY read FIFO */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
/* 0x15B8 - Training SW 2 Register */
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
do {
|
|
reg = (reg_read(REG_DRAM_TRAINING_2_ADDR)) &
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
} while (reg); /* Wait for '0' */
|
|
|
|
/* Read pattern from SDRAM */
|
|
sdram_offset = cs * (SDRAM_CS_SIZE + 1) + SDRAM_RL_OFFS;
|
|
locked_pups = 0;
|
|
if (MV_OK !=
|
|
ddr3_sdram_compare(dram_info, 0xFF, &locked_pups,
|
|
rl_pattern, LEN_STD_PATTERN,
|
|
sdram_offset, 0, 0, NULL, 0))
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_RL_PATTERN;
|
|
|
|
/* Octet evaluation */
|
|
/* pup_num = Q or 1 for ECC */
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc); pup++) {
|
|
/* Check Overrun */
|
|
if (!((reg_read(REG_DRAM_TRAINING_2_ADDR) >>
|
|
(REG_DRAM_TRAINING_2_OVERRUN_OFFS + pup)) & 0x1)) {
|
|
overrun(cs, dram_info, pup, locked_pups,
|
|
&locked_sum, ecc, &first_octet_locked,
|
|
&counter_in_progress, final_delay,
|
|
delay, phase);
|
|
} else {
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We got overrun on pup: ",
|
|
(u32)pup, 1);
|
|
}
|
|
}
|
|
|
|
if (locked_sum == (dram_info->num_of_std_pups *
|
|
(1 - ecc) + ecc)) {
|
|
all_locked = 1;
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - Single Cs - All pups locked\n");
|
|
}
|
|
|
|
/*
|
|
* This is a fix for unstable condition where pups are
|
|
* toggling between match and no match
|
|
*/
|
|
/*
|
|
* If some of the pups is >1 <3, check if we did it too
|
|
* many times
|
|
*/
|
|
if (counter_in_progress == 1) {
|
|
/* Notify at least one Counter is >=1 and < 3 */
|
|
if (repeat_max_cnt < RL_RETRY_COUNT) {
|
|
repeat_max_cnt++;
|
|
counter_in_progress = 1;
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - Counter is >=1 and <3\n");
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - So we will not increment the delay to see if locked again\n");
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - repeat_max_cnt reached max so now we will increment the delay\n");
|
|
counter_in_progress = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check some of the pups are in the middle of state machine
|
|
* and don't increment the delays
|
|
*/
|
|
if (!counter_in_progress && !all_locked) {
|
|
int idx;
|
|
|
|
idx = pup + ecc * ECC_BIT;
|
|
|
|
repeat_max_cnt = 0;
|
|
/* if 1:1 mode */
|
|
if ((!ratio_2to1) && ((phase == 0) || (phase == 4)))
|
|
ui_max_delay = MAX_DELAY_INV;
|
|
else
|
|
ui_max_delay = MAX_DELAY;
|
|
|
|
/* Increment Delay */
|
|
if (delay < ui_max_delay) {
|
|
delay++;
|
|
/*
|
|
* Mark the last delay/pahse place for
|
|
* window final place
|
|
*/
|
|
if (delay == ui_max_delay) {
|
|
if ((!ratio_2to1 && phase ==
|
|
MAX_PHASE_RL_L_1TO1)
|
|
|| (ratio_2to1 && phase ==
|
|
MAX_PHASE_RL_L_2TO1))
|
|
final_delay = 1;
|
|
}
|
|
} else {
|
|
/* Phase+CL Incrementation */
|
|
delay = 0;
|
|
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
if (first_octet_locked) {
|
|
/* some Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_L_1TO1) {
|
|
if (phase == 1) {
|
|
phase = 4;
|
|
} else {
|
|
phase++;
|
|
delay = MIN_DELAY_PHASE_1_LIMIT;
|
|
}
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
DEBUG_RL_S("1)DDR3 - Read Leveling - ERROR - NOT all PUPs Locked n");
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_RL_PUP_UNLOCK;
|
|
}
|
|
} else {
|
|
/* NO Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_UL_1TO1) {
|
|
phase++;
|
|
delay =
|
|
MIN_DELAY_PHASE_1_LIMIT;
|
|
} else {
|
|
phase = 0;
|
|
}
|
|
}
|
|
} else {
|
|
/* 2:1 mode */
|
|
if (first_octet_locked) {
|
|
/* some Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_L_2TO1) {
|
|
phase++;
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
DEBUG_RL_S("2)DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc); pup++) {
|
|
/* pup_num = Q or 1 for ECC */
|
|
if (dram_info->rl_val[cs][idx][S]
|
|
== 0) {
|
|
DEBUG_RL_C("Failed byte is = ",
|
|
pup, 1);
|
|
}
|
|
}
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_RL_PUP_UNLOCK;
|
|
}
|
|
} else {
|
|
/* No Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_UL_2TO1)
|
|
phase++;
|
|
else
|
|
phase = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we finished a full Phases cycle (so now
|
|
* phase = 0, need to increment rd_sample_dly
|
|
*/
|
|
if (phase == 0 && first_octet_locked == 0) {
|
|
rd_sample_delay++;
|
|
if (rd_sample_delay == 0x10) {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
DEBUG_RL_S("3)DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc); pup++) {
|
|
/* pup_num = Q or 1 for ECC */
|
|
if (dram_info->
|
|
rl_val[cs][idx][S] == 0) {
|
|
DEBUG_RL_C("Failed byte is = ",
|
|
pup, 1);
|
|
}
|
|
}
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_PUP_UNLOCK;
|
|
}
|
|
|
|
/* Set current rd_sample_delay */
|
|
reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK
|
|
<< (REG_READ_DATA_SAMPLE_DELAYS_OFFS
|
|
* cs));
|
|
reg |= (rd_sample_delay <<
|
|
(REG_READ_DATA_SAMPLE_DELAYS_OFFS *
|
|
cs));
|
|
reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR,
|
|
reg);
|
|
}
|
|
|
|
/*
|
|
* Set current rdReadyDelay according to the
|
|
* hash table (Need to do this in every phase
|
|
* change)
|
|
*/
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_2_ADDR);
|
|
switch (phase) {
|
|
case 0:
|
|
add = (add >>
|
|
REG_TRAINING_DEBUG_2_OFFS);
|
|
break;
|
|
case 1:
|
|
add = (add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 3));
|
|
break;
|
|
case 4:
|
|
add = (add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 6));
|
|
break;
|
|
case 5:
|
|
add = (add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 9));
|
|
break;
|
|
}
|
|
add &= REG_TRAINING_DEBUG_2_MASK;
|
|
} else {
|
|
/* 2:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_3_ADDR);
|
|
add = (add >>
|
|
(phase *
|
|
REG_TRAINING_DEBUG_3_OFFS));
|
|
add &= REG_TRAINING_DEBUG_3_MASK;
|
|
}
|
|
|
|
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg |= ((rd_sample_delay + add) <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
|
|
dram_info->rd_smpl_dly = rd_sample_delay;
|
|
dram_info->rd_rdy_dly = rd_sample_delay + add;
|
|
}
|
|
|
|
/* Reset counters for pups with states<RD_STATE_COUNT */
|
|
for (pup = 0; pup <
|
|
(dram_info->num_of_std_pups * (1 - ecc) + ecc);
|
|
pup++) {
|
|
if (dram_info->rl_val[cs][idx][C] < RL_RETRY_COUNT)
|
|
dram_info->rl_val[cs][idx][C] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
phase_min = 10;
|
|
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups); pup++) {
|
|
if (dram_info->rl_val[cs][pup][PS] < phase_min)
|
|
phase_min = dram_info->rl_val[cs][pup][PS];
|
|
}
|
|
|
|
/*
|
|
* Set current rdReadyDelay according to the hash table (Need to
|
|
* do this in every phase change)
|
|
*/
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_2_ADDR);
|
|
switch (phase_min) {
|
|
case 0:
|
|
add = (add >> REG_TRAINING_DEBUG_2_OFFS);
|
|
break;
|
|
case 1:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 3));
|
|
break;
|
|
case 4:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 6));
|
|
break;
|
|
case 5:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 9));
|
|
break;
|
|
}
|
|
add &= REG_TRAINING_DEBUG_2_MASK;
|
|
} else {
|
|
/* 2:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_3_ADDR);
|
|
add = (add >> (phase_min * REG_TRAINING_DEBUG_3_OFFS));
|
|
add &= REG_TRAINING_DEBUG_3_MASK;
|
|
}
|
|
|
|
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg |= ((rd_sample_delay + add) << (REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
|
|
dram_info->rd_rdy_dly = rd_sample_delay + add;
|
|
|
|
for (cs = 0; cs < dram_info->num_cs; cs++) {
|
|
for (pup = 0; pup < dram_info->num_of_total_pups; pup++) {
|
|
reg = ddr3_read_pup_reg(PUP_RL_MODE + 0x1, cs, pup);
|
|
dram_info->rl_val[cs][pup][DQS] = (reg & 0x3F);
|
|
}
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
#else
|
|
|
|
/*
|
|
* Name: ddr3_read_leveling_single_cs_window_mode
|
|
* Desc: Execute Read leveling for single Chip select
|
|
* Args: cs - current chip select
|
|
* freq - current sequence frequency
|
|
* ecc - ecc iteration indication
|
|
* dram_info - main struct
|
|
* Notes:
|
|
* Returns: MV_OK if success, MV_FAIL if fail.
|
|
*/
|
|
static int ddr3_read_leveling_single_cs_window_mode(u32 cs, u32 freq,
|
|
int ratio_2to1, u32 ecc,
|
|
MV_DRAM_INFO *dram_info)
|
|
{
|
|
u32 reg, delay, phase, sum, pup, rd_sample_delay, add, locked_pups,
|
|
repeat_max_cnt, sdram_offset, final_sum, locked_sum;
|
|
u32 delay_s, delay_e, tmp, phase_min, ui_max_delay;
|
|
int all_locked, first_octet_locked, counter_in_progress;
|
|
int final_delay = 0;
|
|
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - Single CS - ", (u32) cs, 1);
|
|
|
|
/* Init values */
|
|
phase = 0;
|
|
delay = 0;
|
|
rd_sample_delay = dram_info->cl;
|
|
all_locked = 0;
|
|
first_octet_locked = 0;
|
|
repeat_max_cnt = 0;
|
|
sum = 0;
|
|
final_sum = 0;
|
|
locked_sum = 0;
|
|
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc);
|
|
pup++)
|
|
dram_info->rl_val[cs][pup + ecc * ECC_BIT][S] = 0;
|
|
|
|
/* Main loop */
|
|
while (!all_locked) {
|
|
counter_in_progress = 0;
|
|
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - RdSmplDly = ");
|
|
DEBUG_RL_FULL_D(rd_sample_delay, 2);
|
|
DEBUG_RL_FULL_S(", RdRdyDly = ");
|
|
DEBUG_RL_FULL_D(dram_info->rd_rdy_dly, 2);
|
|
DEBUG_RL_FULL_S(", Phase = ");
|
|
DEBUG_RL_FULL_D(phase, 1);
|
|
DEBUG_RL_FULL_S(", Delay = ");
|
|
DEBUG_RL_FULL_D(delay, 2);
|
|
DEBUG_RL_FULL_S("\n");
|
|
|
|
/*
|
|
* Broadcast to all PUPs current RL delays: DQS phase,leveling
|
|
* delay
|
|
*/
|
|
ddr3_write_pup_reg(PUP_RL_MODE, cs, PUP_BC, phase, delay);
|
|
|
|
/* Reset PHY read FIFO */
|
|
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
/* 0x15B8 - Training SW 2 Register */
|
|
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
|
|
|
|
do {
|
|
reg = (reg_read(REG_DRAM_TRAINING_2_ADDR)) &
|
|
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
|
|
} while (reg); /* Wait for '0' */
|
|
|
|
/* Read pattern from SDRAM */
|
|
sdram_offset = cs * (SDRAM_CS_SIZE + 1) + SDRAM_RL_OFFS;
|
|
locked_pups = 0;
|
|
if (MV_OK !=
|
|
ddr3_sdram_compare(dram_info, 0xFF, &locked_pups,
|
|
rl_pattern, LEN_STD_PATTERN,
|
|
sdram_offset, 0, 0, NULL, 0))
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_WIN_PATTERN;
|
|
|
|
/* Octet evaluation */
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups *
|
|
(1 - ecc) + ecc); pup++) {
|
|
/* pup_num = Q or 1 for ECC */
|
|
int idx;
|
|
|
|
idx = pup + ecc * ECC_BIT;
|
|
|
|
/* Check Overrun */
|
|
if (!((reg_read(REG_DRAM_TRAINING_2_ADDR) >>
|
|
(REG_DRAM_TRAINING_2_OVERRUN_OFFS +
|
|
pup)) & 0x1)) {
|
|
/* If no OverRun */
|
|
|
|
/* Inside the window */
|
|
if (dram_info->rl_val[cs][idx][S] == RL_WINDOW_STATE) {
|
|
/*
|
|
* Match expected value ? - Update
|
|
* State Machine
|
|
*/
|
|
if (((~locked_pups >> pup) & 0x1)
|
|
&& (final_delay == 0)) {
|
|
/* Match - Still inside the Window */
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We got another match inside the window for pup: ",
|
|
(u32)pup, 1);
|
|
|
|
} else {
|
|
/* We got fail -> this is the end of the window */
|
|
dram_info->rl_val[cs][idx][DE] = delay;
|
|
dram_info->rl_val[cs][idx][PE] = phase;
|
|
/* Go to Final State */
|
|
dram_info->rl_val[cs][idx][S]++;
|
|
final_sum++;
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We finished the window for pup: ",
|
|
(u32)pup, 1);
|
|
}
|
|
|
|
/* Before the start of the window */
|
|
} else if (dram_info->rl_val[cs][idx][S] ==
|
|
RL_UNLOCK_STATE) {
|
|
/* Must be RL_UNLOCK_STATE */
|
|
/*
|
|
* Match expected value ? - Update
|
|
* State Machine
|
|
*/
|
|
if (dram_info->rl_val[cs][idx][C] <
|
|
RL_RETRY_COUNT) {
|
|
if (((~locked_pups >> pup) & 0x1)) {
|
|
/* Match */
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We have no overrun and a match on pup: ",
|
|
(u32)pup, 1);
|
|
dram_info->rl_val[cs][idx][C]++;
|
|
|
|
/* If pup got to last state - lock the delays */
|
|
if (dram_info->rl_val[cs][idx][C] ==
|
|
RL_RETRY_COUNT) {
|
|
dram_info->rl_val[cs][idx][C] = 0;
|
|
dram_info->rl_val[cs][idx][DS] =
|
|
delay;
|
|
dram_info->rl_val[cs][idx][PS] =
|
|
phase;
|
|
dram_info->rl_val[cs][idx][S]++; /* Go to Window State */
|
|
locked_sum++;
|
|
/* Will count the pups that got locked */
|
|
|
|
/* IF First lock - need to lock delays */
|
|
if (first_octet_locked == 0) {
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We got first lock on pup: ",
|
|
(u32)pup, 1);
|
|
first_octet_locked
|
|
=
|
|
1;
|
|
}
|
|
}
|
|
|
|
/* if pup is in not in final state but there was match - dont increment counter */
|
|
else {
|
|
counter_in_progress
|
|
= 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
DEBUG_RL_FULL_C("DDR3 - Read Leveling - We got overrun on pup: ",
|
|
(u32)pup, 1);
|
|
counter_in_progress = 1;
|
|
}
|
|
}
|
|
|
|
if (final_sum == (dram_info->num_of_std_pups * (1 - ecc) + ecc)) {
|
|
all_locked = 1;
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - Single Cs - All pups locked\n");
|
|
}
|
|
|
|
/*
|
|
* This is a fix for unstable condition where pups are
|
|
* toggling between match and no match
|
|
*/
|
|
/*
|
|
* If some of the pups is >1 <3, check if we did it too many
|
|
* times
|
|
*/
|
|
if (counter_in_progress == 1) {
|
|
if (repeat_max_cnt < RL_RETRY_COUNT) {
|
|
/* Notify at least one Counter is >=1 and < 3 */
|
|
repeat_max_cnt++;
|
|
counter_in_progress = 1;
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - Counter is >=1 and <3\n");
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - So we will not increment the delay to see if locked again\n");
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - repeat_max_cnt reached max so now we will increment the delay\n");
|
|
counter_in_progress = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check some of the pups are in the middle of state machine
|
|
* and don't increment the delays
|
|
*/
|
|
if (!counter_in_progress && !all_locked) {
|
|
repeat_max_cnt = 0;
|
|
if (!ratio_2to1)
|
|
ui_max_delay = MAX_DELAY_INV;
|
|
else
|
|
ui_max_delay = MAX_DELAY;
|
|
|
|
/* Increment Delay */
|
|
if (delay < ui_max_delay) {
|
|
/* Delay Incrementation */
|
|
delay++;
|
|
if (delay == ui_max_delay) {
|
|
/*
|
|
* Mark the last delay/pahse place
|
|
* for window final place
|
|
*/
|
|
if ((!ratio_2to1
|
|
&& phase == MAX_PHASE_RL_L_1TO1)
|
|
|| (ratio_2to1
|
|
&& phase ==
|
|
MAX_PHASE_RL_L_2TO1))
|
|
final_delay = 1;
|
|
}
|
|
} else {
|
|
/* Phase+CL Incrementation */
|
|
delay = 0;
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
if (first_octet_locked) {
|
|
/* some pupet was Locked */
|
|
if (phase < MAX_PHASE_RL_L_1TO1) {
|
|
#ifdef RL_WINDOW_WA
|
|
if (phase == 0)
|
|
#else
|
|
if (phase == 1)
|
|
#endif
|
|
phase = 4;
|
|
else
|
|
phase++;
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_WIN_PUP_UNLOCK;
|
|
}
|
|
} else {
|
|
/* No Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_UL_1TO1) {
|
|
#ifdef RL_WINDOW_WA
|
|
if (phase == 0)
|
|
phase = 4;
|
|
#else
|
|
phase++;
|
|
#endif
|
|
} else
|
|
phase = 0;
|
|
}
|
|
} else {
|
|
/* 2:1 mode */
|
|
if (first_octet_locked) {
|
|
/* Some Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_L_2TO1) {
|
|
phase++;
|
|
} else {
|
|
DEBUG_RL_FULL_S("DDR3 - Read Leveling - ERROR - NOT all PUPs Locked\n");
|
|
return MV_DDR3_TRAINING_ERR_RD_LVL_WIN_PUP_UNLOCK;
|
|
}
|
|
} else {
|
|
/* No Pup was Locked */
|
|
if (phase < MAX_PHASE_RL_UL_2TO1)
|
|
phase++;
|
|
else
|
|
phase = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we finished a full Phases cycle (so
|
|
* now phase = 0, need to increment
|
|
* rd_sample_dly
|
|
*/
|
|
if (phase == 0 && first_octet_locked == 0) {
|
|
rd_sample_delay++;
|
|
|
|
/* Set current rd_sample_delay */
|
|
reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK <<
|
|
(REG_READ_DATA_SAMPLE_DELAYS_OFFS
|
|
* cs));
|
|
reg |= (rd_sample_delay <<
|
|
(REG_READ_DATA_SAMPLE_DELAYS_OFFS *
|
|
cs));
|
|
reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR,
|
|
reg);
|
|
}
|
|
|
|
/*
|
|
* Set current rdReadyDelay according to the
|
|
* hash table (Need to do this in every phase
|
|
* change)
|
|
*/
|
|
if (!ratio_2to1) {
|
|
/* 1:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_2_ADDR);
|
|
switch (phase) {
|
|
case 0:
|
|
add = add >>
|
|
REG_TRAINING_DEBUG_2_OFFS;
|
|
break;
|
|
case 1:
|
|
add = add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 3);
|
|
break;
|
|
case 4:
|
|
add = add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 6);
|
|
break;
|
|
case 5:
|
|
add = add >>
|
|
(REG_TRAINING_DEBUG_2_OFFS
|
|
+ 9);
|
|
break;
|
|
}
|
|
} else {
|
|
/* 2:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_3_ADDR);
|
|
add = (add >> phase *
|
|
REG_TRAINING_DEBUG_3_OFFS);
|
|
}
|
|
add &= REG_TRAINING_DEBUG_2_MASK;
|
|
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
|
|
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg |= ((rd_sample_delay + add) <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
|
|
dram_info->rd_smpl_dly = rd_sample_delay;
|
|
dram_info->rd_rdy_dly = rd_sample_delay + add;
|
|
}
|
|
|
|
/* Reset counters for pups with states<RD_STATE_COUNT */
|
|
for (pup = 0;
|
|
pup <
|
|
(dram_info->num_of_std_pups * (1 - ecc) + ecc);
|
|
pup++) {
|
|
if (dram_info->rl_val[cs][idx][C] < RL_RETRY_COUNT)
|
|
dram_info->rl_val[cs][idx][C] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
phase_min = 10;
|
|
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups); pup++) {
|
|
DEBUG_RL_S("DDR3 - Read Leveling - Window info - PUP: ");
|
|
DEBUG_RL_D((u32) pup, 1);
|
|
DEBUG_RL_S(", PS: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][PS], 1);
|
|
DEBUG_RL_S(", DS: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][DS], 2);
|
|
DEBUG_RL_S(", PE: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][PE], 1);
|
|
DEBUG_RL_S(", DE: ");
|
|
DEBUG_RL_D((u32) dram_info->rl_val[cs][pup][DE], 2);
|
|
DEBUG_RL_S("\n");
|
|
}
|
|
|
|
/* Find center of the window procedure */
|
|
for (pup = 0; pup < (dram_info->num_of_std_pups * (1 - ecc) + ecc);
|
|
pup++) {
|
|
#ifdef RL_WINDOW_WA
|
|
if (!ratio_2to1) { /* 1:1 mode */
|
|
if (dram_info->rl_val[cs][idx][PS] == 4)
|
|
dram_info->rl_val[cs][idx][PS] = 1;
|
|
if (dram_info->rl_val[cs][idx][PE] == 4)
|
|
dram_info->rl_val[cs][idx][PE] = 1;
|
|
|
|
delay_s = dram_info->rl_val[cs][idx][PS] *
|
|
MAX_DELAY_INV + dram_info->rl_val[cs][idx][DS];
|
|
delay_e = dram_info->rl_val[cs][idx][PE] *
|
|
MAX_DELAY_INV + dram_info->rl_val[cs][idx][DE];
|
|
|
|
tmp = (delay_e - delay_s) / 2 + delay_s;
|
|
phase = tmp / MAX_DELAY_INV;
|
|
if (phase == 1) /* 1:1 mode */
|
|
phase = 4;
|
|
|
|
if (phase < phase_min) /* for the read ready delay */
|
|
phase_min = phase;
|
|
|
|
dram_info->rl_val[cs][idx][P] = phase;
|
|
dram_info->rl_val[cs][idx][D] = tmp % MAX_DELAY_INV;
|
|
|
|
} else {
|
|
delay_s = dram_info->rl_val[cs][idx][PS] *
|
|
MAX_DELAY + dram_info->rl_val[cs][idx][DS];
|
|
delay_e = dram_info->rl_val[cs][idx][PE] *
|
|
MAX_DELAY + dram_info->rl_val[cs][idx][DE];
|
|
|
|
tmp = (delay_e - delay_s) / 2 + delay_s;
|
|
phase = tmp / MAX_DELAY;
|
|
|
|
if (phase < phase_min) /* for the read ready delay */
|
|
phase_min = phase;
|
|
|
|
dram_info->rl_val[cs][idx][P] = phase;
|
|
dram_info->rl_val[cs][idx][D] = tmp % MAX_DELAY;
|
|
}
|
|
#else
|
|
if (!ratio_2to1) { /* 1:1 mode */
|
|
if (dram_info->rl_val[cs][idx][PS] > 1)
|
|
dram_info->rl_val[cs][idx][PS] -= 2;
|
|
if (dram_info->rl_val[cs][idx][PE] > 1)
|
|
dram_info->rl_val[cs][idx][PE] -= 2;
|
|
}
|
|
|
|
delay_s = dram_info->rl_val[cs][idx][PS] * MAX_DELAY +
|
|
dram_info->rl_val[cs][idx][DS];
|
|
delay_e = dram_info->rl_val[cs][idx][PE] * MAX_DELAY +
|
|
dram_info->rl_val[cs][idx][DE];
|
|
|
|
tmp = (delay_e - delay_s) / 2 + delay_s;
|
|
phase = tmp / MAX_DELAY;
|
|
if (!ratio_2to1 && phase > 1) /* 1:1 mode */
|
|
phase += 2;
|
|
|
|
if (phase < phase_min) /* for the read ready delay */
|
|
phase_min = phase;
|
|
|
|
dram_info->rl_val[cs][idx][P] = phase;
|
|
dram_info->rl_val[cs][idx][D] = tmp % MAX_DELAY;
|
|
#endif
|
|
}
|
|
|
|
/* Set current rdReadyDelay according to the hash table (Need to do this in every phase change) */
|
|
if (!ratio_2to1) { /* 1:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_2_ADDR);
|
|
switch (phase_min) {
|
|
case 0:
|
|
add = (add >> REG_TRAINING_DEBUG_2_OFFS);
|
|
break;
|
|
case 1:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 3));
|
|
break;
|
|
case 4:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 6));
|
|
break;
|
|
case 5:
|
|
add = (add >> (REG_TRAINING_DEBUG_2_OFFS + 9));
|
|
break;
|
|
}
|
|
} else { /* 2:1 mode */
|
|
add = reg_read(REG_TRAINING_DEBUG_3_ADDR);
|
|
add = (add >> phase_min * REG_TRAINING_DEBUG_3_OFFS);
|
|
}
|
|
|
|
add &= REG_TRAINING_DEBUG_2_MASK;
|
|
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
|
|
reg &=
|
|
~(REG_READ_DATA_READY_DELAYS_MASK <<
|
|
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg |=
|
|
((rd_sample_delay + add) << (REG_READ_DATA_READY_DELAYS_OFFS * cs));
|
|
reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
|
|
dram_info->rd_rdy_dly = rd_sample_delay + add;
|
|
|
|
for (cs = 0; cs < dram_info->num_cs; cs++) {
|
|
for (pup = 0; pup < dram_info->num_of_total_pups; pup++) {
|
|
reg = ddr3_read_pup_reg(PUP_RL_MODE + 0x1, cs, pup);
|
|
dram_info->rl_val[cs][pup][DQS] = (reg & 0x3F);
|
|
}
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
#endif
|
|
|