upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
453 lines
12 KiB
453 lines
12 KiB
/*
|
|
* Atmel PIO pinctrl driver
|
|
*
|
|
* Copyright (C) 2016 Atmel Corporation
|
|
* Wenyou.Yang <wenyou.yang@atmel.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <mach/at91_pio.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define MAX_GPIO_BANKS 5
|
|
#define MAX_NB_GPIO_PER_BANK 32
|
|
|
|
#define MAX_PINMUX_ENTRIES 200
|
|
|
|
struct at91_pinctrl_priv {
|
|
struct at91_port *reg_base[MAX_GPIO_BANKS];
|
|
u32 nbanks;
|
|
};
|
|
|
|
#define PULL_UP BIT(0)
|
|
#define MULTI_DRIVE BIT(1)
|
|
#define DEGLITCH BIT(2)
|
|
#define PULL_DOWN BIT(3)
|
|
#define DIS_SCHMIT BIT(4)
|
|
#define DRIVE_STRENGTH_SHIFT 5
|
|
#define DRIVE_STRENGTH_MASK 0x3
|
|
#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
|
|
#define OUTPUT BIT(7)
|
|
#define OUTPUT_VAL_SHIFT 8
|
|
#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
|
|
#define DEBOUNCE BIT(16)
|
|
#define DEBOUNCE_VAL_SHIFT 17
|
|
#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
|
|
|
|
/**
|
|
* These defines will translated the dt binding settings to our internal
|
|
* settings. They are not necessarily the same value as the register setting.
|
|
* The actual drive strength current of low, medium and high must be looked up
|
|
* from the corresponding device datasheet. This value is different for pins
|
|
* that are even in the same banks. It is also dependent on VCC.
|
|
* DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
|
|
* strength when there is no dt config for it.
|
|
*/
|
|
#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT)
|
|
#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT)
|
|
#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT)
|
|
#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT)
|
|
|
|
enum at91_mux {
|
|
AT91_MUX_GPIO = 0,
|
|
AT91_MUX_PERIPH_A = 1,
|
|
AT91_MUX_PERIPH_B = 2,
|
|
AT91_MUX_PERIPH_C = 3,
|
|
AT91_MUX_PERIPH_D = 4,
|
|
};
|
|
|
|
/**
|
|
* struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
|
|
* on new IP with support for periph C and D the way to mux in
|
|
* periph A and B has changed
|
|
* So provide the right callbacks
|
|
* if not present means the IP does not support it
|
|
* @mux_A_periph: assign the corresponding pin to the peripheral A function.
|
|
* @mux_B_periph: assign the corresponding pin to the peripheral B function.
|
|
* @mux_C_periph: assign the corresponding pin to the peripheral C function.
|
|
* @mux_D_periph: assign the corresponding pin to the peripheral D function.
|
|
* @set_deglitch: enable/disable the deglitch feature.
|
|
* @set_debounce: enable/disable the debounce feature.
|
|
* @set_pulldown: enable/disable the pulldown feature.
|
|
* @disable_schmitt_trig: disable schmitt trigger
|
|
*/
|
|
struct at91_pinctrl_mux_ops {
|
|
void (*mux_A_periph)(struct at91_port *pio, u32 mask);
|
|
void (*mux_B_periph)(struct at91_port *pio, u32 mask);
|
|
void (*mux_C_periph)(struct at91_port *pio, u32 mask);
|
|
void (*mux_D_periph)(struct at91_port *pio, u32 mask);
|
|
void (*set_deglitch)(struct at91_port *pio, u32 mask, bool is_on);
|
|
void (*set_debounce)(struct at91_port *pio, u32 mask, bool is_on,
|
|
u32 div);
|
|
void (*set_pulldown)(struct at91_port *pio, u32 mask, bool is_on);
|
|
void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask);
|
|
void (*set_drivestrength)(struct at91_port *pio, u32 pin,
|
|
u32 strength);
|
|
};
|
|
|
|
static u32 two_bit_pin_value_shift_amount(u32 pin)
|
|
{
|
|
/* return the shift value for a pin for "two bit" per pin registers,
|
|
* i.e. drive strength */
|
|
return 2 * ((pin >= MAX_NB_GPIO_PER_BANK/2)
|
|
? pin - MAX_NB_GPIO_PER_BANK/2 : pin);
|
|
}
|
|
|
|
static void at91_mux_disable_interrupt(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(mask, &pio->idr);
|
|
}
|
|
|
|
static void at91_mux_set_pullup(struct at91_port *pio, u32 mask, bool on)
|
|
{
|
|
if (on)
|
|
writel(mask, &pio->mux.pio3.ppddr);
|
|
|
|
writel(mask, (on ? &pio->puer : &pio->pudr));
|
|
}
|
|
|
|
static void at91_mux_set_output(struct at91_port *pio, unsigned mask,
|
|
bool is_on, bool val)
|
|
{
|
|
writel(mask, (val ? &pio->sodr : &pio->codr));
|
|
writel(mask, (is_on ? &pio->oer : &pio->odr));
|
|
}
|
|
|
|
static void at91_mux_set_multidrive(struct at91_port *pio, u32 mask, bool on)
|
|
{
|
|
writel(mask, (on ? &pio->mder : &pio->mddr));
|
|
}
|
|
|
|
static void at91_mux_set_A_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(mask, &pio->mux.pio2.asr);
|
|
}
|
|
|
|
static void at91_mux_set_B_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(mask, &pio->mux.pio2.bsr);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_A_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
|
|
writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_B_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
|
|
writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_C_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
|
|
writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_D_periph(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
|
|
writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
|
|
}
|
|
|
|
static void at91_mux_set_deglitch(struct at91_port *pio, u32 mask, bool is_on)
|
|
{
|
|
writel(mask, (is_on ? &pio->ifer : &pio->ifdr));
|
|
}
|
|
|
|
static void at91_mux_pio3_set_deglitch(struct at91_port *pio,
|
|
u32 mask, bool is_on)
|
|
{
|
|
if (is_on)
|
|
writel(mask, &pio->mux.pio3.ifscdr);
|
|
at91_mux_set_deglitch(pio, mask, is_on);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_debounce(struct at91_port *pio, u32 mask,
|
|
bool is_on, u32 div)
|
|
{
|
|
if (is_on) {
|
|
writel(mask, &pio->mux.pio3.ifscer);
|
|
writel(div & PIO_SCDR_DIV, &pio->mux.pio3.scdr);
|
|
writel(mask, &pio->ifer);
|
|
} else {
|
|
writel(mask, &pio->mux.pio3.ifscdr);
|
|
}
|
|
}
|
|
|
|
static void at91_mux_pio3_set_pulldown(struct at91_port *pio,
|
|
u32 mask, bool is_on)
|
|
{
|
|
if (is_on)
|
|
writel(mask, &pio->pudr);
|
|
|
|
writel(mask, (is_on ? &pio->mux.pio3.ppder : &pio->mux.pio3.ppddr));
|
|
}
|
|
|
|
static void at91_mux_pio3_disable_schmitt_trig(struct at91_port *pio,
|
|
u32 mask)
|
|
{
|
|
writel(readl(&pio->schmitt) | mask, &pio->schmitt);
|
|
}
|
|
|
|
static void set_drive_strength(void *reg, u32 pin, u32 strength)
|
|
{
|
|
u32 shift = two_bit_pin_value_shift_amount(pin);
|
|
|
|
clrsetbits_le32(reg, DRIVE_STRENGTH_MASK << shift, strength << shift);
|
|
}
|
|
|
|
static void at91_mux_sama5d3_set_drivestrength(struct at91_port *pio,
|
|
u32 pin, u32 setting)
|
|
{
|
|
void *reg;
|
|
|
|
reg = &pio->driver12;
|
|
if (pin >= MAX_NB_GPIO_PER_BANK / 2)
|
|
reg = &pio->driver2;
|
|
|
|
/* do nothing if setting is zero */
|
|
if (!setting)
|
|
return;
|
|
|
|
/* strength is 1 to 1 with setting for SAMA5 */
|
|
set_drive_strength(reg, pin, setting);
|
|
}
|
|
|
|
static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio,
|
|
u32 pin, u32 setting)
|
|
{
|
|
void *reg;
|
|
|
|
reg = &pio->driver1;
|
|
if (pin >= MAX_NB_GPIO_PER_BANK / 2)
|
|
reg = &pio->driver12;
|
|
|
|
/* do nothing if setting is zero */
|
|
if (!setting)
|
|
return;
|
|
|
|
/* strength is inverse on SAM9x5s with our defines
|
|
* 0 = hi, 1 = med, 2 = low, 3 = rsvd */
|
|
setting = DRIVE_STRENGTH_HI - setting;
|
|
|
|
set_drive_strength(reg, pin, setting);
|
|
}
|
|
|
|
static struct at91_pinctrl_mux_ops at91rm9200_ops = {
|
|
.mux_A_periph = at91_mux_set_A_periph,
|
|
.mux_B_periph = at91_mux_set_B_periph,
|
|
.set_deglitch = at91_mux_set_deglitch,
|
|
};
|
|
|
|
static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
|
|
.mux_A_periph = at91_mux_pio3_set_A_periph,
|
|
.mux_B_periph = at91_mux_pio3_set_B_periph,
|
|
.mux_C_periph = at91_mux_pio3_set_C_periph,
|
|
.mux_D_periph = at91_mux_pio3_set_D_periph,
|
|
.set_deglitch = at91_mux_pio3_set_deglitch,
|
|
.set_debounce = at91_mux_pio3_set_debounce,
|
|
.set_pulldown = at91_mux_pio3_set_pulldown,
|
|
.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
|
|
.set_drivestrength = at91_mux_sam9x5_set_drivestrength,
|
|
};
|
|
|
|
static struct at91_pinctrl_mux_ops sama5d3_ops = {
|
|
.mux_A_periph = at91_mux_pio3_set_A_periph,
|
|
.mux_B_periph = at91_mux_pio3_set_B_periph,
|
|
.mux_C_periph = at91_mux_pio3_set_C_periph,
|
|
.mux_D_periph = at91_mux_pio3_set_D_periph,
|
|
.set_deglitch = at91_mux_pio3_set_deglitch,
|
|
.set_debounce = at91_mux_pio3_set_debounce,
|
|
.set_pulldown = at91_mux_pio3_set_pulldown,
|
|
.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
|
|
.set_drivestrength = at91_mux_sama5d3_set_drivestrength,
|
|
};
|
|
|
|
static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask)
|
|
{
|
|
writel(mask, &pio->pdr);
|
|
}
|
|
|
|
static void at91_mux_gpio_enable(struct at91_port *pio, u32 mask, bool input)
|
|
{
|
|
writel(mask, &pio->per);
|
|
writel(mask, (input ? &pio->odr : &pio->oer));
|
|
}
|
|
|
|
static int at91_pmx_set(struct at91_pinctrl_mux_ops *ops,
|
|
struct at91_port *pio, u32 mask, enum at91_mux mux)
|
|
{
|
|
at91_mux_disable_interrupt(pio, mask);
|
|
switch (mux) {
|
|
case AT91_MUX_GPIO:
|
|
at91_mux_gpio_enable(pio, mask, 1);
|
|
break;
|
|
case AT91_MUX_PERIPH_A:
|
|
ops->mux_A_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_B:
|
|
ops->mux_B_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_C:
|
|
if (!ops->mux_C_periph)
|
|
return -EINVAL;
|
|
ops->mux_C_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_D:
|
|
if (!ops->mux_D_periph)
|
|
return -EINVAL;
|
|
ops->mux_D_periph(pio, mask);
|
|
break;
|
|
}
|
|
if (mux)
|
|
at91_mux_gpio_disable(pio, mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops,
|
|
struct at91_port *pio, u32 pin, u32 config)
|
|
{
|
|
u32 mask = BIT(pin);
|
|
|
|
if ((config & PULL_UP) && (config & PULL_DOWN))
|
|
return -EINVAL;
|
|
|
|
at91_mux_set_output(pio, mask, config & OUTPUT,
|
|
(config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
|
|
at91_mux_set_pullup(pio, mask, config & PULL_UP);
|
|
at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
|
|
if (ops->set_deglitch)
|
|
ops->set_deglitch(pio, mask, config & DEGLITCH);
|
|
if (ops->set_debounce)
|
|
ops->set_debounce(pio, mask, config & DEBOUNCE,
|
|
(config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
|
|
if (ops->set_pulldown)
|
|
ops->set_pulldown(pio, mask, config & PULL_DOWN);
|
|
if (ops->disable_schmitt_trig && config & DIS_SCHMIT)
|
|
ops->disable_schmitt_trig(pio, mask);
|
|
if (ops->set_drivestrength)
|
|
ops->set_drivestrength(pio, pin,
|
|
(config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pin_check_config(struct udevice *dev, u32 bank, u32 pin)
|
|
{
|
|
struct at91_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
if (bank >= priv->nbanks) {
|
|
debug("pin conf bank %d >= nbanks %d\n", bank, priv->nbanks);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pin >= MAX_NB_GPIO_PER_BANK) {
|
|
debug("pin conf pin %d >= %d\n", pin, MAX_NB_GPIO_PER_BANK);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pinctrl_set_state(struct udevice *dev, struct udevice *config)
|
|
{
|
|
struct at91_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(config);
|
|
u32 cells[MAX_PINMUX_ENTRIES];
|
|
const u32 *list = cells;
|
|
u32 bank, pin;
|
|
u32 conf, mask, count, i;
|
|
int size;
|
|
int ret;
|
|
enum at91_mux mux;
|
|
struct at91_port *pio;
|
|
struct at91_pinctrl_mux_ops *ops =
|
|
(struct at91_pinctrl_mux_ops *)dev_get_driver_data(dev);
|
|
|
|
/*
|
|
* the binding format is atmel,pins = <bank pin mux CONFIG ...>,
|
|
* do sanity check and calculate pins number
|
|
*/
|
|
size = fdtdec_get_int_array_count(blob, node, "atmel,pins",
|
|
cells, ARRAY_SIZE(cells));
|
|
|
|
/* we do not check return since it's safe node passed down */
|
|
count = size >> 2;
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
bank = *list++;
|
|
pin = *list++;
|
|
mux = *list++;
|
|
conf = *list++;
|
|
|
|
ret = at91_pin_check_config(dev, bank, pin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pio = priv->reg_base[bank];
|
|
mask = BIT(pin);
|
|
|
|
ret = at91_pmx_set(ops, pio, mask, mux);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = at91_pinconf_set(ops, pio, pin, conf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct pinctrl_ops at91_pinctrl_ops = {
|
|
.set_state = at91_pinctrl_set_state,
|
|
};
|
|
|
|
static int at91_pinctrl_probe(struct udevice *dev)
|
|
{
|
|
struct at91_pinctrl_priv *priv = dev_get_priv(dev);
|
|
fdt_addr_t addr_base;
|
|
int index;
|
|
|
|
for (index = 0; index < MAX_GPIO_BANKS; index++) {
|
|
addr_base = devfdt_get_addr_index(dev, index);
|
|
if (addr_base == FDT_ADDR_T_NONE)
|
|
break;
|
|
|
|
priv->reg_base[index] = (struct at91_port *)addr_base;
|
|
}
|
|
|
|
priv->nbanks = index;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id at91_pinctrl_match[] = {
|
|
{ .compatible = "atmel,sama5d3-pinctrl", .data = (ulong)&sama5d3_ops },
|
|
{ .compatible = "atmel,at91sam9x5-pinctrl", .data = (ulong)&at91sam9x5_ops },
|
|
{ .compatible = "atmel,at91rm9200-pinctrl", .data = (ulong)&at91rm9200_ops },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(at91_pinctrl) = {
|
|
.name = "pinctrl_at91",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = at91_pinctrl_match,
|
|
.probe = at91_pinctrl_probe,
|
|
.priv_auto_alloc_size = sizeof(struct at91_pinctrl_priv),
|
|
.ops = &at91_pinctrl_ops,
|
|
};
|
|
|