upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
470 lines
16 KiB
470 lines
16 KiB
/*
|
|
* (C) Copyright 2000, 2001, 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific,
|
|
* for SinoVee Microsystems SC8xx series SBC
|
|
* http://www.fel.com.cn (Chinese)
|
|
* http://www.sinovee.com (English)
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* Custom configuration */
|
|
/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
|
|
/* SC85T,SC860T, FEL8xx-AT(855T/860T) */
|
|
/*#define CONFIG_FEL8xx_AT */
|
|
/*#define CONFIG_LCD */
|
|
/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
|
|
/* #define CONFIG_50MHz */
|
|
/* #define CONFIG_66MHz */
|
|
/* #define CONFIG_75MHz */
|
|
#define CONFIG_80MHz
|
|
/*#define CONFIG_100MHz */
|
|
/* #define CONFIG_BUS_DIV2 1 */
|
|
/* for BOOT device port size */
|
|
/* #define CONFIG_BOOT_8B */
|
|
#define CONFIG_BOOT_16B
|
|
/* #define CONFIG_BOOT_32B */
|
|
/* #define CONFIG_CAN_DRIVER */
|
|
/* #define DEBUG */
|
|
#define CONFIG_FEC_ENET
|
|
|
|
/* #define CONFIG_SDRAM_16M */
|
|
#define CONFIG_SDRAM_32M
|
|
/* #define CONFIG_SDRAM_64M */
|
|
#define CFG_RESET_ADDRESS 0xffffffff
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
/* #define CONFIG_MPC823 1 */
|
|
/* #define CONFIG_MPC850 1 */
|
|
#define CONFIG_MPC855 1
|
|
/* #define CONFIG_MPC860 1 */
|
|
/* #define CONFIG_MPC860T 1 */
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog */
|
|
|
|
#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */
|
|
|
|
#ifdef CONFIG_LCD /* with LCD controller ? */
|
|
/* #define CONFIG_NEC_NL6648BC20 1 / * use NEC NL6648BC20 display */
|
|
#endif
|
|
|
|
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
|
|
#undef CONFIG_8xx_CONS_SMC2
|
|
#undef CONFIG_8xx_CONS_NONE
|
|
#define CONFIG_BAUDRATE 19200 /* console baudrate = 115kbps */
|
|
#if 0
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
|
|
#endif
|
|
|
|
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
|
|
|
|
#define CONFIG_BOARD_TYPES 1 /* support board types */
|
|
|
|
#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
|
|
":$(hostname):$(netdev):off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;" \
|
|
"bootm $(kernel_addr)\0" \
|
|
"flash_self=run ramargs addip;" \
|
|
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
|
|
"net_nfs=tftp 0x210000 $(bootfile);run nfsargs addip;bootm\0" \
|
|
"rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0" \
|
|
"bootfile=pImage-sc855t\0" \
|
|
"kernel_addr=48000000\0" \
|
|
"ramdisk_addr=48100000\0" \
|
|
""
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
|
|
"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
|
|
|
|
|
|
#ifdef CONFIG_LCD
|
|
# undef CONFIG_STATUS_LED /* disturbs display */
|
|
#else
|
|
# define CONFIG_STATUS_LED 1 /* Status LED enabled */
|
|
#endif /* CONFIG_LCD */
|
|
|
|
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
|
|
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
|
|
|
|
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
|
CFG_CMD_ASKENV | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_DOC | \
|
|
/* CFG_CMD_IDE |*/ \
|
|
CFG_CMD_DATE )
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
/*-----------------------------------------------------------------------
|
|
* Internal Memory Mapped Register
|
|
*/
|
|
#define CFG_IMMR 0xFF000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
|
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
|
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_FLASH_BASE 0x40000000
|
|
#define CFG_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
#ifdef CONFIG_BOOT_8B
|
|
#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
|
|
#elif defined (CONFIG_BOOT_16B)
|
|
#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
|
|
#elif defined (CONFIG_BOOT_32B)
|
|
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
|
#endif
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Hardware Information Block
|
|
*/
|
|
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
|
|
#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
|
|
#define CFG_HWINFO_MAGIC 0x46454C38 /* 'SVM8' */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 11-9
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
|
*/
|
|
#if defined(CONFIG_WATCHDOG)
|
|
/*#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
*/
|
|
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
#else
|
|
#define CFG_SYPCR 0xffffff88
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 11-6
|
|
*-----------------------------------------------------------------------
|
|
* PCMCIA config., multi-function pin tri-state
|
|
*/
|
|
#ifndef CONFIG_CAN_DRIVER
|
|
/*#define CFG_SIUMCR 0x00610c00 */
|
|
#define CFG_SIUMCR 0x00000000
|
|
#else /* we must activate GPL5 in the SIUMCR for CAN */
|
|
#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TBSCR - Time Base Status and Control 11-26
|
|
*-----------------------------------------------------------------------
|
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
|
*/
|
|
#define CFG_TBSCR 0x0001
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RTCSC - Real-Time Clock Status and Control Register 11-27
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CFG_RTCSC 0x00c3
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 11-31
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
|
*/
|
|
#define CFG_PISCR 0x0000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
|
|
*-----------------------------------------------------------------------
|
|
* Reset PLL lock status sticky bit, timer expired status bit and timer
|
|
* interrupt status bit
|
|
*/
|
|
#if defined (CONFIG_100MHz)
|
|
#define CFG_PLPRCR 0x06301000
|
|
#define CONFIG_8xx_GCLK_FREQ 100000000
|
|
#elif defined (CONFIG_80MHz)
|
|
#define CFG_PLPRCR 0x04f01000
|
|
#define CONFIG_8xx_GCLK_FREQ 80000000
|
|
#elif defined(CONFIG_75MHz)
|
|
#define CFG_PLPRCR 0x04a00100
|
|
#define CONFIG_8xx_GCLK_FREQ 75000000
|
|
#elif defined(CONFIG_66MHz)
|
|
#define CFG_PLPRCR 0x04101000
|
|
#define CONFIG_8xx_GCLK_FREQ 66000000
|
|
#elif defined(CONFIG_50MHz)
|
|
#define CFG_PLPRCR 0x03101000
|
|
#define CONFIG_8xx_GCLK_FREQ 50000000
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock and reset Control Register 15-27
|
|
*-----------------------------------------------------------------------
|
|
* Set clock output, timebase and RTC source and divider,
|
|
* power management and some other internal clocks
|
|
*/
|
|
#define SCCR_MASK SCCR_EBDF11
|
|
#ifdef CONFIG_BUS_DIV2
|
|
#define CFG_SCCR 0x02020000 | SCCR_RTSEL
|
|
#else /* up to 50 MHz we use a 1:1 clock */
|
|
#define CFG_SCCR 0x02000000 | SCCR_RTSEL
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCMCIA stuff
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
|
|
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
|
|
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
|
|
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
|
|
#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
|
|
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
|
|
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
|
|
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
#undef CONFIG_IDE_RESET /* reset for ide not supported */
|
|
|
|
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
|
|
|
#define CFG_ATA_BASE_ADDR 0xFE100010
|
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
|
/*#define CFG_ATA_IDE1_OFFSET 0x0C00 */
|
|
#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O
|
|
*/
|
|
#define CFG_ATA_REG_OFFSET 0x0200 /* Offset for normal register accesses
|
|
*/
|
|
#define CFG_ATA_ALT_OFFSET 0x0210 /* Offset for alternate registers
|
|
*/
|
|
#define CONFIG_ATAPI
|
|
#define CFG_PIO_MODE 0
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
/*#define CFG_DER 0x2002000F*/
|
|
#define CFG_DER 0x0
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*
|
|
* BR0/1 and OR0/1 (FLASH)
|
|
*/
|
|
|
|
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
|
|
#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
|
|
|
|
/* used to re-map FLASH both when starting from SRAM or FLASH:
|
|
* restrict access enough to keep SRAM working (if any)
|
|
* but not too much to meddle with FLASH accesses
|
|
*/
|
|
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
|
|
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
|
|
|
|
/*
|
|
* FLASH timing:
|
|
*/
|
|
#if defined(CONFIG_100MHz)
|
|
#define CFG_OR_TIMING_FLASH 0x000002f4
|
|
#define CFG_OR_TIMING_DOC 0x000002f4
|
|
#define CFG_MxMR_PTx 0x61000000
|
|
#define CFG_MPTPR 0x400
|
|
|
|
#elif defined(CONFIG_80MHz)
|
|
#define CFG_OR_TIMING_FLASH 0x00000ff4
|
|
#define CFG_OR_TIMING_DOC 0x000001f4
|
|
#define CFG_MxMR_PTx 0x4e000000
|
|
#define CFG_MPTPR 0x400
|
|
|
|
#elif defined(CONFIG_75MHz)
|
|
#define CFG_OR_TIMING_FLASH 0x000008f4
|
|
#define CFG_OR_TIMING_DOC 0x000002f4
|
|
#define CFG_MxMR_PTx 0x49000000
|
|
#define CFG_MPTPR 0x400
|
|
|
|
#elif defined(CONFIG_66MHz)
|
|
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
|
|
OR_SCY_3_CLK | OR_EHTR | OR_BI)
|
|
/*#define CFG_OR_TIMING_FLASH 0x000001f4 */
|
|
#define CFG_OR_TIMING_DOC 0x000003f4
|
|
#define CFG_MxMR_PTx 0x40000000
|
|
#define CFG_MPTPR 0x400
|
|
|
|
#else /* 50 MHz */
|
|
#define CFG_OR_TIMING_FLASH 0x00000ff4
|
|
#define CFG_OR_TIMING_DOC 0x000001f4
|
|
#define CFG_MxMR_PTx 0x30000000
|
|
#define CFG_MPTPR 0x400
|
|
#endif /*CONFIG_??MHz */
|
|
|
|
|
|
#if defined (CONFIG_BOOT_8B) /* 512K X 8 ,29F040 , 2MB space */
|
|
#define CFG_OR0_PRELIM (0xffe00000 | CFG_OR_TIMING_FLASH)
|
|
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
|
|
#elif defined (CONFIG_BOOT_16B) /* 29lv160 X 16 , 4MB space */
|
|
#define CFG_OR0_PRELIM (0xffc00000 | CFG_OR_TIMING_FLASH)
|
|
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
|
|
#elif defined( CONFIG_BOOT_32B ) /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
|
|
#define CFG_OR0_PRELIM (0xfc000000 | CFG_OR_TIMING_FLASH)
|
|
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
|
|
#else
|
|
#error Boot device port size missing.
|
|
#endif
|
|
|
|
/*
|
|
* Disk-On-Chip configuration
|
|
*/
|
|
|
|
#define CFG_DOC_SHORT_TIMEOUT
|
|
#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
|
|
|
|
#define CFG_DOC_SUPPORT_2000
|
|
#define CFG_DOC_SUPPORT_MILLENNIUM
|
|
#define CFG_DOC_BASE 0x80000000
|
|
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#endif /* __CONFIG_H */
|
|
|