upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
359 lines
7.8 KiB
359 lines
7.8 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#define FLASH_BANK_SIZE 0x400000
|
|
#define MAIN_SECT_SIZE 0x20000
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
ulong flash_init (void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
|
|
flash_info[i].flash_id =
|
|
(INTEL_MANUFACT & FLASH_VENDMASK) |
|
|
(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
|
|
memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
|
|
switch (i) {
|
|
case 0:
|
|
flashbase = PHYS_FLASH_1;
|
|
break;
|
|
case 1:
|
|
flashbase = PHYS_FLASH_2;
|
|
break;
|
|
default:
|
|
panic ("configured too many flash banks!\n");
|
|
break;
|
|
}
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
flash_info[i].start[j] =
|
|
flashbase + j * MAIN_SECT_SIZE;
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
/* Protect monitor and environment sectors
|
|
*/
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_FLASH_BASE,
|
|
CFG_FLASH_BASE + monitor_flash_len - 1,
|
|
&flash_info[0]);
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i, j;
|
|
|
|
for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case (INTEL_MANUFACT & FLASH_VENDMASK):
|
|
printf ("Intel: ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
|
|
printf ("28F320J3A (32Mbit)\n");
|
|
break;
|
|
case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
|
|
printf ("28F128J3 (128Mbit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
goto Done;
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf (" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
info++;
|
|
}
|
|
|
|
Done: ;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int flag, prot, sect;
|
|
int rc = ERR_OK;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
return ERR_UNKNOWN_FLASH_TYPE;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
return ERR_INVAL;
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) !=
|
|
(INTEL_MANUFACT & FLASH_VENDMASK)) {
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot)
|
|
return ERR_PROTECTED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
|
|
|
|
printf ("Erasing sector %2d ... ", sect);
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
vu_short *addr = (vu_short *) (info->start[sect]);
|
|
|
|
*addr = 0x20; /* erase setup */
|
|
*addr = 0xD0; /* erase confirm */
|
|
|
|
while ((*addr & 0x80) != 0x80) {
|
|
if (get_timer_masked () >
|
|
CFG_FLASH_ERASE_TOUT) {
|
|
*addr = 0xB0; /* suspend erase */
|
|
*addr = 0xFF; /* reset to read mode */
|
|
rc = ERR_TIMOUT;
|
|
goto outahere;
|
|
}
|
|
}
|
|
|
|
/* clear status register command */
|
|
*addr = 0x50;
|
|
/* reset to read mode */
|
|
*addr = 0xFF;
|
|
}
|
|
printf ("ok.\n");
|
|
}
|
|
if (ctrlc ())
|
|
printf ("User Interrupt!\n");
|
|
|
|
outahere:
|
|
|
|
/* allow flash to settle - wait 10 ms */
|
|
udelay_masked (10000);
|
|
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash
|
|
*/
|
|
|
|
static int write_word (flash_info_t * info, ulong dest, ushort data)
|
|
{
|
|
vu_short *addr = (vu_short *) dest, val;
|
|
int rc = ERR_OK;
|
|
int flag;
|
|
|
|
/* Check if Flash is (sufficiently) erased
|
|
*/
|
|
if ((*addr & data) != data)
|
|
return ERR_NOT_ERASED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
/* clear status register command */
|
|
*addr = 0x50;
|
|
|
|
/* program set-up command */
|
|
*addr = 0x40;
|
|
|
|
/* latch address/data */
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
/* wait while polling the status register */
|
|
while (((val = *addr) & 0x80) != 0x80) {
|
|
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
|
|
rc = ERR_TIMOUT;
|
|
/* suspend program command */
|
|
*addr = 0xB0;
|
|
goto outahere;
|
|
}
|
|
}
|
|
|
|
if (val & 0x1A) { /* check for error */
|
|
printf ("\nFlash write error %02x at address %08lx\n",
|
|
(int) val, (unsigned long) dest);
|
|
if (val & (1 << 3)) {
|
|
printf ("Voltage range error.\n");
|
|
rc = ERR_PROG_ERROR;
|
|
goto outahere;
|
|
}
|
|
if (val & (1 << 1)) {
|
|
printf ("Device protect error.\n");
|
|
rc = ERR_PROTECTED;
|
|
goto outahere;
|
|
}
|
|
if (val & (1 << 4)) {
|
|
printf ("Programming error.\n");
|
|
rc = ERR_PROG_ERROR;
|
|
goto outahere;
|
|
}
|
|
rc = ERR_PROG_ERROR;
|
|
goto outahere;
|
|
}
|
|
|
|
outahere:
|
|
/* read array command */
|
|
*addr = 0xFF;
|
|
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash.
|
|
*/
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp;
|
|
ushort data;
|
|
int l;
|
|
int i, rc;
|
|
|
|
wp = (addr & ~1); /* get lower word aligned address */
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
for (; i < 2 && cnt > 0; ++i) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt == 0 && i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 2;
|
|
}
|
|
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
while (cnt >= 2) {
|
|
data = *((vu_short *) src);
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 2;
|
|
wp += 2;
|
|
cnt -= 2;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
}
|
|
for (; i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
return write_word (info, wp, data);
|
|
}
|
|
|