upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/innokom/flash.c

419 lines
9.0 KiB

/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
* (C) Copyright 2002
* Auerswald GmbH & Co KG, Germany
* Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/pxa-regs.h>
/* Debugging macros ------------------------------------------------------ */
#undef FLASH_DEBUG
/* Some debug macros */
#if (FLASH_DEBUG > 2 )
#define PRINTK3(args...) printf(args)
#else
#define PRINTK3(args...)
#endif
#if FLASH_DEBUG > 1
#define PRINTK2(args...) printf(args)
#else
#define PRINTK2(args...)
#endif
#ifdef FLASH_DEBUG
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif
/* ------------------------------------------------------------------------ */
/* Development system: we have only 16 MB Flash */
#ifdef CONFIG_MTD_INNOKOM_16MB
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB (during development) */
#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
#endif
/* Production system: we have 64 MB Flash */
#ifdef CONFIG_MTD_INNOKOM_64MB
#define FLASH_BANK_SIZE 0x04000000 /* 64 MB */
#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
#endif
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
/**
* flash_init: - initialize data structures for flash chips
*
* @return: size of the flash
*/
ulong flash_init(void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
switch (i) {
case 0:
flashbase = PHYS_FLASH_1;
break;
default:
panic("configured too many flash banks!\n");
break;
}
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
}
size += flash_info[i].size;
}
/* Protect u-boot sectors */
flash_protect(FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + (256*1024) - 1,
&flash_info[0]);
#ifdef CONFIG_ENV_IS_IN_FLASH
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
#endif
return size;
}
/**
* flash_print_info: - print information about the flash situation
*
* @param info:
*/
void flash_print_info (flash_info_t *info)
{
int i, j;
for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
case (INTEL_MANUFACT & FLASH_VENDMASK):
printf("Intel: ");
break;
default:
printf("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
printf("28F128J3 (128Mbit)\n");
break;
default:
printf("Unknown Chip Type\n");
return;
}
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) printf ("\n ");
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
info++;
}
}
/**
* flash_erase: - erase flash sectors
*
*/
int flash_erase(flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
int rc = ERR_OK;
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
if ((s_first < 0) || (s_first > s_last)) {
return ERR_INVAL;
}
if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
return ERR_UNKNOWN_FLASH_VENDOR;
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) prot++;
}
if (prot) return ERR_PROTECTED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
flag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
printf("Erasing sector %2d ... ", sect);
PRINTK("\n");
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
if (info->protect[sect] == 0) { /* not protected */
u16 * volatile addr = (u16 * volatile)(info->start[sect]);
PRINTK("unlocking sector\n");
*addr = 0x0060;
*addr = 0x00d0;
*addr = 0x00ff;
PRINTK("erasing sector\n");
*addr = 0x0020;
PRINTK("confirming erase\n");
*addr = 0x00D0;
while ((*addr & 0x0080) != 0x0080) {
PRINTK(".");
if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
*addr = 0x00B0; /* suspend erase*/
*addr = 0x00FF; /* read mode */
rc = ERR_TIMOUT;
goto outahere;
}
}
PRINTK("clearing status register\n");
*addr = 0x0050;
PRINTK("resetting to read mode");
*addr = 0x00FF;
}
printf("ok.\n");
}
if (ctrlc()) printf("User Interrupt!\n");
outahere:
/* allow flash to settle - wait 10 ms */
udelay_masked(10000);
if (flag) enable_interrupts();
return rc;
}
/**
* write_word: - copy memory to flash
*
* @param info:
* @param dest:
* @param data:
* @return:
*/
static int write_word (flash_info_t *info, ulong dest, ushort data)
{
volatile u16 *addr = (u16 *)dest, val;
int rc = ERR_OK;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
flag = disable_interrupts();
/* clear status register command */
*addr = 0x50;
/* program set-up command */
*addr = 0x40;
/* latch address/data */
*addr = data;
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
/* wait while polling the status register */
while(((val = *addr) & 0x80) != 0x80) {
if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
rc = ERR_TIMOUT;
*addr = 0xB0; /* suspend program command */
goto outahere;
}
}
if(val & 0x1A) { /* check for error */
printf("\nFlash write error %02x at address %08lx\n",
(int)val, (unsigned long)dest);
if(val & (1<<3)) {
printf("Voltage range error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
}
if(val & (1<<1)) {
printf("Device protect error.\n");
rc = ERR_PROTECTED;
goto outahere;
}
if(val & (1<<4)) {
printf("Programming error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
}
rc = ERR_PROG_ERROR;
goto outahere;
}
outahere:
*addr = 0xFF; /* read array command */
if (flag) enable_interrupts();
return rc;
}
/**
* write_buf: - Copy memory to flash.
*
* @param info:
* @param src: source of copy transaction
* @param addr: where to copy to
* @param cnt: number of bytes to copy
*
* @return error code
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp;
ushort data;
int l;
int i, rc;
wp = (addr & ~1); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 8);
}
for (; i<2 && cnt>0; ++i) {
data = (data >> 8) | (*src++ << 8);
--cnt;
++cp;
}
for (; cnt==0 && i<2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 8);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 2;
}
/*
* handle word aligned part
*/
while (cnt >= 2) {
/* data = *((vushort*)src); */
data = *((ushort*)src);
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
src += 2;
wp += 2;
cnt -= 2;
}
if (cnt == 0) return ERR_OK;
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
data = (data >> 8) | (*src++ << 8);
--cnt;
}
for (; i<2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 8);
}
return write_word(info, wp, data);
}