upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
496 lines
16 KiB
496 lines
16 KiB
/*
|
|
* (C) Copyright 2000, 2001, 2002
|
|
* Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
|
|
*
|
|
* Configuration for the Cogent CSB226 board. For details see
|
|
* http://www.cogcomp.com/csb_csb226.htm
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* include/configs/csb226.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define DEBUG 1
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
|
|
#define CONFIG_CSB226 1 /* on a CSB226 board */
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
/* for timer/console/ethernet */
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 19200
|
|
#undef CONFIG_MISC_INIT_R /* not used yet */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_RUN
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
|
|
#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_IPADDR 192.168.1.56
|
|
#define CONFIG_SERVERIP 192.168.1.5
|
|
#define CONFIG_BOOTCOMMAND "bootm 0x40000"
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
/*
|
|
* Size of malloc() pool; this lives below the uppermost 128 KiB which are
|
|
* used for the RAM copy of the uboot code
|
|
*
|
|
*/
|
|
#define CFG_MALLOC_LEN (128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 128 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0xa3000000 /* default load address */
|
|
/* RS: where is this documented? */
|
|
/* RS: is this where U-Boot is */
|
|
/* RS: relocated to in RAM? */
|
|
|
|
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
|
|
/* RS: the oscillator is actually 3680130?? */
|
|
#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
|
|
/* 0101000001 */
|
|
/* ^^^^^ Memory Speed 99.53 MHz */
|
|
/* ^^ Run Mode Speed = 2x Mem Speed */
|
|
/* ^^ Turbo Mode Sp. = 1x Run M. Sp. */
|
|
|
|
#define CFG_MONITOR_LEN 0x20000 /* 128 KiB */
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* Network chip
|
|
*/
|
|
#define CONFIG_DRIVER_CS8900 1
|
|
#define CS8900_BUS32 1
|
|
#define CS8900_BASE 0x08000000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
|
|
|
|
#define CFG_DRAM_BASE 0xa0000000 /* RAM starts here */
|
|
#define CFG_DRAM_SIZE 0x02000000
|
|
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
# if 0
|
|
/* FIXME: switch to _documented_ registers */
|
|
/*
|
|
* GPIO settings
|
|
*
|
|
* GP15 == nCS1 is 1
|
|
* GP24 == SFRM is 1
|
|
* GP25 == TXD is 1
|
|
* GP33 == nCS5 is 1
|
|
* GP39 == FFTXD is 1
|
|
* GP41 == RTS is 1
|
|
* GP47 == TXD is 1
|
|
* GP49 == nPWE is 1
|
|
* GP62 == LED_B is 1
|
|
* GP63 == TDM_OE is 1
|
|
* GP78 == nCS2 is 1
|
|
* GP79 == nCS3 is 1
|
|
* GP80 == nCS4 is 1
|
|
*/
|
|
#define CFG_GPSR0_VAL 0x03008000
|
|
#define CFG_GPSR1_VAL 0xC0028282
|
|
#define CFG_GPSR2_VAL 0x0001C000
|
|
|
|
/* GP02 == DON_RST is 0
|
|
* GP23 == SCLK is 0
|
|
* GP45 == USB_ACT is 0
|
|
* GP60 == PLLEN is 0
|
|
* GP61 == LED_A is 0
|
|
* GP73 == SWUPD_LED is 0
|
|
*/
|
|
#define CFG_GPCR0_VAL 0x00800004
|
|
#define CFG_GPCR1_VAL 0x30002000
|
|
#define CFG_GPCR2_VAL 0x00000100
|
|
|
|
/* GP00 == DON_READY is input
|
|
* GP01 == DON_OK is input
|
|
* GP02 == DON_RST is output
|
|
* GP03 == RESET_IND is input
|
|
* GP07 == RES11 is input
|
|
* GP09 == RES12 is input
|
|
* GP11 == SWUPDATE is input
|
|
* GP14 == nPOWEROK is input
|
|
* GP15 == nCS1 is output
|
|
* GP17 == RES22 is input
|
|
* GP18 == RDY is input
|
|
* GP23 == SCLK is output
|
|
* GP24 == SFRM is output
|
|
* GP25 == TXD is output
|
|
* GP26 == RXD is input
|
|
* GP32 == RES21 is input
|
|
* GP33 == nCS5 is output
|
|
* GP34 == FFRXD is input
|
|
* GP35 == CTS is input
|
|
* GP39 == FFTXD is output
|
|
* GP41 == RTS is output
|
|
* GP42 == USB_OK is input
|
|
* GP45 == USB_ACT is output
|
|
* GP46 == RXD is input
|
|
* GP47 == TXD is output
|
|
* GP49 == nPWE is output
|
|
* GP58 == nCPUBUSINT is input
|
|
* GP59 == LANINT is input
|
|
* GP60 == PLLEN is output
|
|
* GP61 == LED_A is output
|
|
* GP62 == LED_B is output
|
|
* GP63 == TDM_OE is output
|
|
* GP64 == nDSPINT is input
|
|
* GP65 == STRAP0 is input
|
|
* GP67 == STRAP1 is input
|
|
* GP69 == STRAP2 is input
|
|
* GP70 == STRAP3 is input
|
|
* GP71 == STRAP4 is input
|
|
* GP73 == SWUPD_LED is output
|
|
* GP78 == nCS2 is output
|
|
* GP79 == nCS3 is output
|
|
* GP80 == nCS4 is output
|
|
*/
|
|
#define CFG_GPDR0_VAL 0x03808004
|
|
#define CFG_GPDR1_VAL 0xF002A282
|
|
#define CFG_GPDR2_VAL 0x0001C200
|
|
|
|
/* GP15 == nCS1 is AF10
|
|
* GP18 == RDY is AF01
|
|
* GP23 == SCLK is AF10
|
|
* GP24 == SFRM is AF10
|
|
* GP25 == TXD is AF10
|
|
* GP26 == RXD is AF01
|
|
* GP33 == nCS5 is AF10
|
|
* GP34 == FFRXD is AF01
|
|
* GP35 == CTS is AF01
|
|
* GP39 == FFTXD is AF10
|
|
* GP41 == RTS is AF10
|
|
* GP46 == RXD is AF10
|
|
* GP47 == TXD is AF01
|
|
* GP49 == nPWE is AF10
|
|
* GP78 == nCS2 is AF10
|
|
* GP79 == nCS3 is AF10
|
|
* GP80 == nCS4 is AF10
|
|
*/
|
|
#define CFG_GAFR0_L_VAL 0x80000000
|
|
#define CFG_GAFR0_U_VAL 0x001A8010
|
|
#define CFG_GAFR1_L_VAL 0x60088058
|
|
#define CFG_GAFR1_U_VAL 0x00000008
|
|
#define CFG_GAFR2_L_VAL 0xA0000000
|
|
#define CFG_GAFR2_U_VAL 0x00000002
|
|
|
|
|
|
/* FIXME: set GPIO_RER/FER */
|
|
|
|
/* RDH = 1
|
|
* PH = 1
|
|
* VFS = 1
|
|
* BFS = 1
|
|
* SSS = 1
|
|
*/
|
|
#define CFG_PSSR_VAL 0x37
|
|
|
|
/*
|
|
* Memory settings
|
|
*
|
|
* This is the configuration for nCS0/1 -> flash banks
|
|
* configuration for nCS1:
|
|
* [31] 0 - Slower Device
|
|
* [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
|
|
* [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
|
|
* [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
|
|
* [19] 1 - 16 Bit bus width
|
|
* [18:16] 000 - nonburst RAM or FLASH
|
|
* configuration for nCS0:
|
|
* [15] 0 - Slower Device
|
|
* [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
|
|
* [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
|
|
* [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
|
|
* [03] 1 - 16 Bit bus width
|
|
* [02:00] 000 - nonburst RAM or FLASH
|
|
*/
|
|
#define CFG_MSC0_VAL 0x25b825b8 /* flash banks */
|
|
|
|
/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
|
|
* configuration for nCS3: DSP
|
|
* [31] 0 - Slower Device
|
|
* [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
|
|
* [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
|
|
* [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
|
|
* [19] 1 - 16 Bit bus width
|
|
* [18:16] 100 - variable latency I/O
|
|
* configuration for nCS2: TDM-Switch
|
|
* [15] 0 - Slower Device
|
|
* [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
|
|
* [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
|
|
* [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
|
|
* [03] 1 - 16 Bit bus width
|
|
* [02:00] 100 - variable latency I/O
|
|
*/
|
|
#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */
|
|
|
|
/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
|
|
*
|
|
* configuration for nCS5: LAN Controller
|
|
* [31] 0 - Slower Device
|
|
* [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
|
|
* [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
|
|
* [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
|
|
* [19] 1 - 16 Bit bus width
|
|
* [18:16] 100 - variable latency I/O
|
|
* configuration for nCS4: ExtBus
|
|
* [15] 0 - Slower Device
|
|
* [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
|
|
* [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
|
|
* [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
|
|
* [03] 1 - 16 Bit bus width
|
|
* [02:00] 100 - variable latency I/O
|
|
*/
|
|
#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
|
|
|
|
/* MDCNFG: SDRAM Configuration Register
|
|
*
|
|
* [31:29] 000 - reserved
|
|
* [28] 0 - no SA1111 compatiblity mode
|
|
* [27] 0 - latch return data with return clock
|
|
* [26] 0 - alternate addressing for pair 2/3
|
|
* [25:24] 00 - timings
|
|
* [23] 0 - internal banks in lower partition 2/3 (not used)
|
|
* [22:21] 00 - row address bits for partition 2/3 (not used)
|
|
* [20:19] 00 - column address bits for partition 2/3 (not used)
|
|
* [18] 0 - SDRAM partition 2/3 width is 32 bit
|
|
* [17] 0 - SDRAM partition 3 disabled
|
|
* [16] 0 - SDRAM partition 2 disabled
|
|
* [15:13] 000 - reserved
|
|
* [12] 1 - SA1111 compatiblity mode
|
|
* [11] 1 - latch return data with return clock
|
|
* [10] 0 - no alternate addressing for pair 0/1
|
|
* [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
|
|
* [7] 1 - 4 internal banks in lower partition pair
|
|
* [06:05] 10 - 13 row address bits for partition 0/1
|
|
* [04:03] 01 - 9 column address bits for partition 0/1
|
|
* [02] 0 - SDRAM partition 0/1 width is 32 bit
|
|
* [01] 0 - disable SDRAM partition 1
|
|
* [00] 1 - enable SDRAM partition 0
|
|
*/
|
|
/* use the configuration above but disable partition 0 */
|
|
#define CFG_MDCNFG_VAL 0x000019c8
|
|
|
|
/* MDREFR: SDRAM Refresh Control Register
|
|
*
|
|
* [32:26] 0 - reserved
|
|
* [25] 0 - K2FREE: not free running
|
|
* [24] 0 - K1FREE: not free running
|
|
* [23] 1 - K0FREE: not free running
|
|
* [22] 0 - SLFRSH: self refresh disabled
|
|
* [21] 0 - reserved
|
|
* [20] 0 - APD: no auto power down
|
|
* [19] 0 - K2DB2: SDCLK2 is MemClk
|
|
* [18] 0 - K2RUN: disable SDCLK2
|
|
* [17] 0 - K1DB2: SDCLK1 is MemClk
|
|
* [16] 1 - K1RUN: enable SDCLK1
|
|
* [15] 1 - E1PIN: SDRAM clock enable
|
|
* [14] 1 - K0DB2: SDCLK0 is MemClk
|
|
* [13] 0 - K0RUN: disable SDCLK0
|
|
* [12] 1 - E0PIN: disable SDCKE0
|
|
* [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
|
|
*/
|
|
#define CFG_MDREFR_VAL 0x0081D018
|
|
|
|
/* MDMRS: Mode Register Set Configuration Register
|
|
*
|
|
* [31] 0 - reserved
|
|
* [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
|
|
* [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used)
|
|
* [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
|
|
* [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
|
|
* [15] 0 - reserved
|
|
* [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
|
|
* [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency.
|
|
* [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
|
|
* [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
|
|
*/
|
|
#define CFG_MDMRS_VAL 0x00020022
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CFG_MECR_VAL 0x00000000
|
|
#define CFG_MCMEM0_VAL 0x00000000
|
|
#define CFG_MCMEM1_VAL 0x00000000
|
|
#define CFG_MCATT0_VAL 0x00000000
|
|
#define CFG_MCATT1_VAL 0x00000000
|
|
#define CFG_MCIO0_VAL 0x00000000
|
|
#define CFG_MCIO1_VAL 0x00000000
|
|
#endif
|
|
|
|
/*
|
|
* GPIO settings
|
|
*/
|
|
#define CFG_GPSR0_VAL 0xFFFFFFFF
|
|
#define CFG_GPSR1_VAL 0xFFFFFFFF
|
|
#define CFG_GPSR2_VAL 0xFFFFFFFF
|
|
#define CFG_GPCR0_VAL 0x08022080
|
|
#define CFG_GPCR1_VAL 0x00000000
|
|
#define CFG_GPCR2_VAL 0x00000000
|
|
#define CFG_GPDR0_VAL 0xCD82A878
|
|
#define CFG_GPDR1_VAL 0xFCFFAB80
|
|
#define CFG_GPDR2_VAL 0x0001FFFF
|
|
#define CFG_GAFR0_L_VAL 0x80000000
|
|
#define CFG_GAFR0_U_VAL 0xA5254010
|
|
#define CFG_GAFR1_L_VAL 0x599A9550
|
|
#define CFG_GAFR1_U_VAL 0xAAA5AAAA
|
|
#define CFG_GAFR2_L_VAL 0xAAAAAAAA
|
|
#define CFG_GAFR2_U_VAL 0x00000002
|
|
|
|
/* FIXME: set GPIO_RER/FER */
|
|
|
|
#define CFG_PSSR_VAL 0x20
|
|
|
|
/*
|
|
* Memory settings
|
|
*/
|
|
|
|
#define CFG_MSC0_VAL 0x2ef15af0
|
|
#define CFG_MSC1_VAL 0x00003ff4
|
|
#define CFG_MSC2_VAL 0x7ff07ff0
|
|
#define CFG_MDCNFG_VAL 0x09a909a9
|
|
#define CFG_MDREFR_VAL 0x038ff030
|
|
#define CFG_MDMRS_VAL 0x00220022
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CFG_MECR_VAL 0x00000000
|
|
#define CFG_MCMEM0_VAL 0x00000000
|
|
#define CFG_MCMEM1_VAL 0x00000000
|
|
#define CFG_MCATT0_VAL 0x00000000
|
|
#define CFG_MCATT1_VAL 0x00000000
|
|
#define CFG_MCIO0_VAL 0x00000000
|
|
#define CFG_MCIO1_VAL 0x00000000
|
|
|
|
#define CSB226_USER_LED0 0x00000008
|
|
#define CSB226_USER_LED1 0x00000010
|
|
#define CSB226_USER_LED2 0x00000020
|
|
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 128 /* max number of sect. on one chip */
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
|
|
/* Addr of Environment Sector */
|
|
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
|
|
|
#endif /* __CONFIG_H */
|
|
|