upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/gpio/zynq_gpio.c

391 lines
11 KiB

/*
* Xilinx Zynq GPIO device driver
*
* Copyright (C) 2015 DAVE Embedded Systems <devel@dave.eu>
*
* Most of code taken from linux kernel driver (linux/drivers/gpio/gpio-zynq.c)
* Copyright (C) 2009 - 2014 Xilinx, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <dm.h>
#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
/* Maximum banks */
#define ZYNQ_GPIO_MAX_BANK 4
#define ZYNQ_GPIO_BANK0_NGPIO 32
#define ZYNQ_GPIO_BANK1_NGPIO 22
#define ZYNQ_GPIO_BANK2_NGPIO 32
#define ZYNQ_GPIO_BANK3_NGPIO 32
#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
ZYNQ_GPIO_BANK1_NGPIO + \
ZYNQ_GPIO_BANK2_NGPIO + \
ZYNQ_GPIO_BANK3_NGPIO)
#define ZYNQMP_GPIO_MAX_BANK 6
#define ZYNQMP_GPIO_BANK0_NGPIO 26
#define ZYNQMP_GPIO_BANK1_NGPIO 26
#define ZYNQMP_GPIO_BANK2_NGPIO 26
#define ZYNQMP_GPIO_BANK3_NGPIO 32
#define ZYNQMP_GPIO_BANK4_NGPIO 32
#define ZYNQMP_GPIO_BANK5_NGPIO 32
#define ZYNQMP_GPIO_NR_GPIOS 174
#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
/* Register offsets for the GPIO device */
/* LSW Mask & Data -WO */
#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
/* MSW Mask & Data -WO */
#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
/* Data Register-RW */
#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
/* Direction mode reg-RW */
#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
/* Output enable reg-RW */
#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
/* Interrupt mask reg-RO */
#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
/* Interrupt enable reg-WO */
#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
/* Interrupt disable reg-WO */
#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
/* Interrupt status reg-RO */
#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
/* Interrupt type reg-RW */
#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
/* Interrupt polarity reg-RW */
#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
/* Interrupt on any, reg-RW */
#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
/* Disable all interrupts mask */
#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
/* Mid pin number of a bank */
#define ZYNQ_GPIO_MID_PIN_NUM 16
/* GPIO upper 16 bit mask */
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
struct zynq_gpio_privdata {
phys_addr_t base;
const struct zynq_platform_data *p_data;
};
/**
* struct zynq_platform_data - zynq gpio platform data structure
* @label: string to store in gpio->label
* @ngpio: max number of gpio pins
* @max_bank: maximum number of gpio banks
* @bank_min: this array represents bank's min pin
* @bank_max: this array represents bank's max pin
*/
struct zynq_platform_data {
const char *label;
u16 ngpio;
int max_bank;
int bank_min[ZYNQMP_GPIO_MAX_BANK];
int bank_max[ZYNQMP_GPIO_MAX_BANK];
};
static const struct zynq_platform_data zynqmp_gpio_def = {
.label = "zynqmp_gpio",
.ngpio = ZYNQMP_GPIO_NR_GPIOS,
.max_bank = ZYNQMP_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
.bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
.bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
.bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
.bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
};
static const struct zynq_platform_data zynq_gpio_def = {
.label = "zynq_gpio",
.ngpio = ZYNQ_GPIO_NR_GPIOS,
.max_bank = ZYNQ_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
};
/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
* for a given pin in the GPIO device
* @pin_num: gpio pin number within the device
* @bank_num: an output parameter used to return the bank number of the gpio
* pin
* @bank_pin_num: an output parameter used to return pin number within a bank
* for the given gpio pin
*
* Returns the bank number and pin offset within the bank.
*/
static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
unsigned int *bank_num,
unsigned int *bank_pin_num,
struct udevice *dev)
{
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
int bank;
for (bank = 0; bank < priv->p_data->max_bank; bank++) {
if ((pin_num >= priv->p_data->bank_min[bank]) &&
(pin_num <= priv->p_data->bank_max[bank])) {
*bank_num = bank;
*bank_pin_num = pin_num -
priv->p_data->bank_min[bank];
return;
}
}
if (bank >= priv->p_data->max_bank) {
printf("Inavlid bank and pin num\n");
*bank_num = 0;
*bank_pin_num = 0;
}
}
static int gpio_is_valid(unsigned gpio, struct udevice *dev)
{
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
return (gpio >= 0) && (gpio < priv->p_data->ngpio);
}
static int check_gpio(unsigned gpio, struct udevice *dev)
{
if (!gpio_is_valid(gpio, dev)) {
printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
return -1;
}
return 0;
}
static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
{
u32 data;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(gpio, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
data = readl(priv->base +
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
return (data >> bank_pin_num) & 1;
}
static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
{
unsigned int reg_offset, bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(gpio, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
/* only 16 data bits in bit maskable reg */
bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
} else {
reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
}
/*
* get the 32 bit value to be written to the mask/data register where
* the upper 16 bits is the mask and lower 16 bits is the data
*/
value = !!value;
value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
writel(value, priv->base + reg_offset);
return 0;
}
static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(gpio, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
return -1;
/* clear the bit in direction mode reg to set the pin as input */
reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg &= ~BIT(bank_pin_num);
writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
return 0;
}
static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
int value)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(gpio, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* set the GPIO pin as output */
reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
/* configure the output enable reg for the pin */
reg = readl(priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
writel(reg, priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
/* set the state of the pin */
gpio_set_value(gpio, value);
return 0;
}
static int zynq_gpio_get_function(struct udevice *dev, unsigned offset)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(offset, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(offset, &bank_num, &bank_pin_num, dev);
/* set the GPIO pin as output */
reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg &= BIT(bank_pin_num);
if (reg)
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
}
static const struct dm_gpio_ops gpio_zynq_ops = {
.direction_input = zynq_gpio_direction_input,
.direction_output = zynq_gpio_direction_output,
.get_value = zynq_gpio_get_value,
.set_value = zynq_gpio_set_value,
.get_function = zynq_gpio_get_function,
};
static const struct udevice_id zynq_gpio_ids[] = {
{ .compatible = "xlnx,zynq-gpio-1.0",
.data = (ulong)&zynq_gpio_def},
{ .compatible = "xlnx,zynqmp-gpio-1.0",
.data = (ulong)&zynqmp_gpio_def},
{ }
};
static void zynq_gpio_getplat_data(struct udevice *dev)
{
const struct udevice_id *of_match = zynq_gpio_ids;
int ret;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
while (of_match->compatible) {
ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
of_match->compatible);
if (ret >= 0) {
priv->p_data =
(struct zynq_platform_data *)of_match->data;
break;
} else {
of_match++;
continue;
}
}
if (!priv->p_data)
printf("No Platform data found\n");
}
static int zynq_gpio_probe(struct udevice *dev)
{
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
zynq_gpio_getplat_data(dev);
if (priv->p_data)
uc_priv->gpio_count = priv->p_data->ngpio;
return 0;
}
static int zynq_gpio_ofdata_to_platdata(struct udevice *dev)
{
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
priv->base = dev_get_addr(dev);
return 0;
}
U_BOOT_DRIVER(gpio_zynq) = {
.name = "gpio_zynq",
.id = UCLASS_GPIO,
.ops = &gpio_zynq_ops,
.of_match = zynq_gpio_ids,
.ofdata_to_platdata = zynq_gpio_ofdata_to_platdata,
.probe = zynq_gpio_probe,
.priv_auto_alloc_size = sizeof(struct zynq_gpio_privdata),
};