upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/common/Makefile

75 lines
1.9 KiB

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
ifdef MINIMAL
# necessary to create built-in.o
obj- := __dummy__.o
else
obj-$(CONFIG_FSL_CADMUS) += cadmus.o
obj-$(CONFIG_FSL_VIA) += cds_via.o
obj-$(CONFIG_FMAN_ENET) += fman.o
obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
obj-$(CONFIG_VID) += vid.o
endif
obj-$(CONFIG_FSL_QIXIS) += qixis.o
obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
obj-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o
ifndef CONFIG_RAMBOOT_PBL
obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o
endif
obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o
ifdef CONFIG_ARM
obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
else
obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
endif
obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o
obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8555CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8536DS) += ics307_clk.o
obj-$(CONFIG_MPC8572DS) += ics307_clk.o
obj-$(CONFIG_P1022DS) += ics307_clk.o
obj-$(CONFIG_P2020DS) += ics307_clk.o
obj-$(CONFIG_P3041DS) += ics307_clk.o
obj-$(CONFIG_P4080DS) += ics307_clk.o
obj-$(CONFIG_P5020DS) += ics307_clk.o
obj-$(CONFIG_P5040DS) += ics307_clk.o
obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
obj-$(CONFIG_P3041DS) += p_corenet/
obj-$(CONFIG_P4080DS) += p_corenet/
obj-$(CONFIG_P5020DS) += p_corenet/
obj-$(CONFIG_P5040DS) += p_corenet/
obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o
endif