upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
235 lines
6.2 KiB
235 lines
6.2 KiB
/*
|
|
* Copyright (C) 2013 Samsung Electronics
|
|
*
|
|
* Configuration settings for the SAMSUNG EXYNOS5 board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_EXYNOS5_COMMON_H
|
|
#define __CONFIG_EXYNOS5_COMMON_H
|
|
|
|
#define CONFIG_EXYNOS5 /* Exynos5 Family */
|
|
|
|
#include "exynos-common.h"
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
#define CONFIG_EXYNOS_SPL
|
|
|
|
#ifdef FTRACE
|
|
#define CONFIG_TRACE
|
|
#define CONFIG_CMD_TRACE
|
|
#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
|
|
#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
|
|
#define CONFIG_TRACE_EARLY
|
|
#define CONFIG_TRACE_EARLY_ADDR 0x50000000
|
|
#endif
|
|
|
|
/* Enable ACE acceleration for SHA1 and SHA256 */
|
|
#define CONFIG_EXYNOS_ACE_SHA
|
|
#define CONFIG_SHA_HW_ACCEL
|
|
|
|
/* Power Down Modes */
|
|
#define S5P_CHECK_SLEEP 0x00000BAD
|
|
#define S5P_CHECK_DIDLE 0xBAD00000
|
|
#define S5P_CHECK_LPA 0xABAD0000
|
|
|
|
/* Offset for inform registers */
|
|
#define INFORM0_OFFSET 0x800
|
|
#define INFORM1_OFFSET 0x804
|
|
#define INFORM2_OFFSET 0x808
|
|
#define INFORM3_OFFSET 0x80c
|
|
|
|
/* select serial console configuration */
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
|
|
#define CONFIG_SILENT_CONSOLE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_CONSOLE_MUX
|
|
|
|
#define CONFIG_CMD_HASH
|
|
|
|
/* Thermal Management Unit */
|
|
#define CONFIG_EXYNOS_TMU
|
|
#define CONFIG_CMD_DTT
|
|
#define CONFIG_TMU_CMD_DTT
|
|
|
|
/* TPM */
|
|
#define CONFIG_TPM
|
|
#define CONFIG_CMD_TPM
|
|
#define CONFIG_TPM_TIS_I2C
|
|
#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3
|
|
#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
|
|
|
|
/* MMC SPL */
|
|
#define COPY_BL2_FNPTR_ADDR 0x02020030
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
|
|
/* specific .lds file */
|
|
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
|
|
|
|
/* Boot Argument Buffer Size */
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
|
|
|
|
#define CONFIG_RD_LVL
|
|
|
|
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
|
|
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
|
|
#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
|
|
#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
|
|
#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0x00000000
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#define CONFIG_SECURE_BL1_ONLY
|
|
|
|
/* Secure FW size configuration */
|
|
#ifdef CONFIG_SECURE_BL1_ONLY
|
|
#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
|
|
#else
|
|
#define CONFIG_SEC_FW_SIZE 0
|
|
#endif
|
|
|
|
/* Configuration of BL1, BL2, ENV Blocks on mmc */
|
|
#define CONFIG_RES_BLOCK_SIZE (512)
|
|
#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
|
|
#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
|
|
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
|
|
|
|
#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
|
|
#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
|
|
|
|
/* U-boot copy size from boot Media to DRAM.*/
|
|
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
|
|
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
|
|
|
|
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
|
|
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
|
|
|
|
/* I2C */
|
|
|
|
/* TODO(sjg@chromium.org): Move these two options to Kconfig */
|
|
#define CONFIG_DM_I2C
|
|
#define CONFIG_DM_I2C_COMPAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_SYS_I2C_S3C24X0
|
|
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
|
|
#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
|
|
#define CONFIG_I2C_EDID
|
|
|
|
/* SPI */
|
|
#ifdef CONFIG_SPI_FLASH
|
|
#define CONFIG_EXYNOS_SPI
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_SPI_FLASH_WINBOND
|
|
#define CONFIG_SPI_FLASH_GIGADEVICE
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_SF_DEFAULT_SPEED 50000000
|
|
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
|
|
#define CONFIG_OF_SPI
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_SPI_MODE SPI_MODE_0
|
|
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
#define CONFIG_ENV_SPI_BUS 1
|
|
#define CONFIG_ENV_SPI_MAX_HZ 50000000
|
|
#endif
|
|
|
|
/* Ethernet Controllor Driver */
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_SMC911X
|
|
#define CONFIG_SMC911X_BASE 0x5000000
|
|
#define CONFIG_SMC911X_16_BIT
|
|
#define CONFIG_ENV_SROM_BANK 1
|
|
#endif /*CONFIG_CMD_NET*/
|
|
|
|
/* SHA hashing */
|
|
#define CONFIG_CMD_HASH
|
|
#define CONFIG_HASH_VERIFY
|
|
#define CONFIG_SHA1
|
|
#define CONFIG_SHA256
|
|
|
|
/* Enable Time Command */
|
|
#define CONFIG_CMD_TIME
|
|
|
|
#define CONFIG_CMD_GPIO
|
|
|
|
/* USB */
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
|
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
|
|
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
|
|
/* USB boot mode */
|
|
#define CONFIG_USB_BOOTING
|
|
#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
|
|
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
|
|
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
|
|
|
|
/* Enable FIT support and comparison */
|
|
#define CONFIG_FIT
|
|
#define CONFIG_FIT_BEST_MATCH
|
|
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#ifndef MEM_LAYOUT_ENV_SETTINGS
|
|
/* 2GB RAM, bootm size of 256M, load scripts after that */
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"bootm_size=0x10000000\0" \
|
|
"kernel_addr_r=0x42000000\0" \
|
|
"fdt_addr_r=0x43000000\0" \
|
|
"ramdisk_addr_r=0x43300000\0" \
|
|
"scriptaddr=0x50000000\0" \
|
|
"pxefile_addr_r=0x51000000\0"
|
|
#endif
|
|
|
|
#ifndef EXYNOS_DEVICE_SETTINGS
|
|
#define EXYNOS_DEVICE_SETTINGS \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
#endif
|
|
|
|
#ifndef EXYNOS_FDTFILE_SETTING
|
|
#define EXYNOS_FDTFILE_SETTING
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
EXYNOS_DEVICE_SETTINGS \
|
|
EXYNOS_FDTFILE_SETTING \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
BOOTENV
|
|
|
|
#endif /* __CONFIG_EXYNOS5_COMMON_H */
|
|
|