upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
416 lines
12 KiB
416 lines
12 KiB
/*
|
|
* Chromium OS cros_ec driver
|
|
*
|
|
* Copyright (c) 2012 The Chromium OS Authors.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CROS_EC_H
|
|
#define _CROS_EC_H
|
|
|
|
#include <linux/compiler.h>
|
|
#include <ec_commands.h>
|
|
#include <fdtdec.h>
|
|
#include <cros_ec_message.h>
|
|
#include <asm/gpio.h>
|
|
|
|
/* Our configuration information */
|
|
struct cros_ec_dev {
|
|
struct udevice *dev; /* Transport device */
|
|
struct gpio_desc ec_int; /* GPIO used as EC interrupt line */
|
|
int protocol_version; /* Protocol version to use */
|
|
int optimise_flash_write; /* Don't write erased flash blocks */
|
|
|
|
/*
|
|
* These two buffers will always be dword-aligned and include enough
|
|
* space for up to 7 word-alignment bytes also, so we can ensure that
|
|
* the body of the message is always dword-aligned (64-bit).
|
|
*
|
|
* We use this alignment to keep ARM and x86 happy. Probably word
|
|
* alignment would be OK, there might be a small performance advantage
|
|
* to using dword.
|
|
*/
|
|
uint8_t din[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
|
|
__aligned(sizeof(int64_t));
|
|
uint8_t dout[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
|
|
__aligned(sizeof(int64_t));
|
|
};
|
|
|
|
/*
|
|
* Hard-code the number of columns we happen to know we have right now. It
|
|
* would be more correct to call cros_ec_info() at startup and determine the
|
|
* actual number of keyboard cols from there.
|
|
*/
|
|
#define CROS_EC_KEYSCAN_COLS 13
|
|
|
|
/* Information returned by a key scan */
|
|
struct mbkp_keyscan {
|
|
uint8_t data[CROS_EC_KEYSCAN_COLS];
|
|
};
|
|
|
|
/* Holds information about the Chrome EC */
|
|
struct fdt_cros_ec {
|
|
struct fmap_entry flash; /* Address and size of EC flash */
|
|
/*
|
|
* Byte value of erased flash, or -1 if not known. It is normally
|
|
* 0xff but some flash devices use 0 (e.g. STM32Lxxx)
|
|
*/
|
|
int flash_erase_value;
|
|
struct fmap_entry region[EC_FLASH_REGION_COUNT];
|
|
};
|
|
|
|
/**
|
|
* Read the ID of the CROS-EC device
|
|
*
|
|
* The ID is a string identifying the CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param id Place to put the ID
|
|
* @param maxlen Maximum length of the ID field
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen);
|
|
|
|
/**
|
|
* Read a keyboard scan from the CROS-EC device
|
|
*
|
|
* Send a message requesting a keyboard scan and return the result
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param scan Place to put the scan results
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan);
|
|
|
|
/**
|
|
* Read which image is currently running on the CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param image Destination for image identifier
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_read_current_image(struct cros_ec_dev *dev,
|
|
enum ec_current_image *image);
|
|
|
|
/**
|
|
* Read the hash of the CROS-EC device firmware.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param hash Destination for hash information
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_read_hash(struct cros_ec_dev *dev,
|
|
struct ec_response_vboot_hash *hash);
|
|
|
|
/**
|
|
* Send a reboot command to the CROS-EC device.
|
|
*
|
|
* Note that some reboot commands (such as EC_REBOOT_COLD) also reboot the AP.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param cmd Reboot command
|
|
* @param flags Flags for reboot command (EC_REBOOT_FLAG_*)
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
|
|
uint8_t flags);
|
|
|
|
/**
|
|
* Check if the CROS-EC device has an interrupt pending.
|
|
*
|
|
* Read the status of the external interrupt connected to the CROS-EC device.
|
|
* If no external interrupt is configured, this always returns 1.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @return 0 if no interrupt is pending
|
|
*/
|
|
int cros_ec_interrupt_pending(struct udevice *dev);
|
|
|
|
enum {
|
|
CROS_EC_OK,
|
|
CROS_EC_ERR = 1,
|
|
CROS_EC_ERR_FDT_DECODE,
|
|
CROS_EC_ERR_CHECK_VERSION,
|
|
CROS_EC_ERR_READ_ID,
|
|
CROS_EC_ERR_DEV_INIT,
|
|
};
|
|
|
|
/**
|
|
* Initialise the Chromium OS EC driver
|
|
*
|
|
* @param blob Device tree blob containing setup information
|
|
* @param cros_ecp Returns pointer to the cros_ec device, or NULL if none
|
|
* @return 0 if we got an cros_ec device and all is well (or no cros_ec is
|
|
* expected), -ve if we should have an cros_ec device but failed to find
|
|
* one, or init failed (-CROS_EC_ERR_...).
|
|
*/
|
|
int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp);
|
|
|
|
/**
|
|
* Read information about the keyboard matrix
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param info Place to put the info structure
|
|
*/
|
|
int cros_ec_info(struct cros_ec_dev *dev,
|
|
struct ec_response_mkbp_info *info);
|
|
|
|
/**
|
|
* Read the host event flags
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param events_ptr Destination for event flags. Not changed on error.
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr);
|
|
|
|
/**
|
|
* Clear the specified host event flags
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param events Event flags to clear
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events);
|
|
|
|
/**
|
|
* Get/set flash protection
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param set_mask Mask of flags to set; if 0, just retrieves existing
|
|
* protection state without changing it.
|
|
* @param set_flags New flag values; only bits in set_mask are applied;
|
|
* ignored if set_mask=0.
|
|
* @param prot Destination for updated protection state from EC.
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_flash_protect(struct cros_ec_dev *dev,
|
|
uint32_t set_mask, uint32_t set_flags,
|
|
struct ec_response_flash_protect *resp);
|
|
|
|
|
|
/**
|
|
* Run internal tests on the cros_ec interface.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @return 0 if ok, <0 if the test failed
|
|
*/
|
|
int cros_ec_test(struct cros_ec_dev *dev);
|
|
|
|
/**
|
|
* Update the EC RW copy.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param image the content to write
|
|
* @param imafge_size content length
|
|
* @return 0 if ok, <0 if the test failed
|
|
*/
|
|
int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
|
|
const uint8_t *image, int image_size);
|
|
|
|
/**
|
|
* Return a pointer to the board's CROS-EC device
|
|
*
|
|
* This should be implemented by board files.
|
|
*
|
|
* @return pointer to CROS-EC device, or NULL if none is available
|
|
*/
|
|
struct cros_ec_dev *board_get_cros_ec_dev(void);
|
|
|
|
struct dm_cros_ec_ops {
|
|
int (*check_version)(struct udevice *dev);
|
|
int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version,
|
|
const uint8_t *dout, int dout_len,
|
|
uint8_t **dinp, int din_len);
|
|
int (*packet)(struct udevice *dev, int out_bytes, int in_bytes);
|
|
};
|
|
|
|
#define dm_cros_ec_get_ops(dev) \
|
|
((struct dm_cros_ec_ops *)(dev)->driver->ops)
|
|
|
|
int cros_ec_register(struct udevice *dev);
|
|
|
|
/**
|
|
* Dump a block of data for a command.
|
|
*
|
|
* @param name Name for data (e.g. 'in', 'out')
|
|
* @param cmd Command number associated with data, or -1 for none
|
|
* @param data Data block to dump
|
|
* @param len Length of data block to dump
|
|
*/
|
|
void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len);
|
|
|
|
/**
|
|
* Calculate a simple 8-bit checksum of a data block
|
|
*
|
|
* @param data Data block to checksum
|
|
* @param size Size of data block in bytes
|
|
* @return checksum value (0 to 255)
|
|
*/
|
|
int cros_ec_calc_checksum(const uint8_t *data, int size);
|
|
|
|
/**
|
|
* Decode a flash region parameter
|
|
*
|
|
* @param argc Number of params remaining
|
|
* @param argv List of remaining parameters
|
|
* @return flash region (EC_FLASH_REGION_...) or -1 on error
|
|
*/
|
|
int cros_ec_decode_region(int argc, char * const argv[]);
|
|
|
|
int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset,
|
|
uint32_t size);
|
|
|
|
/**
|
|
* Read data from the flash
|
|
*
|
|
* Read an arbitrary amount of data from the EC flash, by repeatedly reading
|
|
* small blocks.
|
|
*
|
|
* The offset starts at 0. You can obtain the region information from
|
|
* cros_ec_flash_offset() to find out where to read for a particular region.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param data Pointer to data buffer to read into
|
|
* @param offset Offset within flash to read from
|
|
* @param size Number of bytes to read
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
|
|
uint32_t size);
|
|
|
|
/**
|
|
* Read back flash parameters
|
|
*
|
|
* This function reads back parameters of the flash as reported by the EC
|
|
*
|
|
* @param dev Pointer to device
|
|
* @param info Pointer to output flash info struct
|
|
*/
|
|
int cros_ec_read_flashinfo(struct cros_ec_dev *dev,
|
|
struct ec_response_flash_info *info);
|
|
|
|
/**
|
|
* Write data to the flash
|
|
*
|
|
* Write an arbitrary amount of data to the EC flash, by repeatedly writing
|
|
* small blocks.
|
|
*
|
|
* The offset starts at 0. You can obtain the region information from
|
|
* cros_ec_flash_offset() to find out where to write for a particular region.
|
|
*
|
|
* Attempting to write to the region where the EC is currently running from
|
|
* will result in an error.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param data Pointer to data buffer to write
|
|
* @param offset Offset within flash to write to.
|
|
* @param size Number of bytes to write
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
|
|
uint32_t offset, uint32_t size);
|
|
|
|
/**
|
|
* Obtain position and size of a flash region
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param region Flash region to query
|
|
* @param offset Returns offset of flash region in EC flash
|
|
* @param size Returns size of flash region
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
|
|
uint32_t *offset, uint32_t *size);
|
|
|
|
/**
|
|
* Read/write VbNvContext from/to a CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param block Buffer of VbNvContext to be read/write
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block);
|
|
int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block);
|
|
|
|
/**
|
|
* Read the version information for the EC images
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param versionp This is set to point to the version information
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_version(struct cros_ec_dev *dev,
|
|
struct ec_response_get_version **versionp);
|
|
|
|
/**
|
|
* Read the build information for the EC
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param versionp This is set to point to the build string
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
|
|
|
|
/**
|
|
* Switch on/off a LDO / FET.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param index index of the LDO/FET to switch
|
|
* @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state);
|
|
|
|
/**
|
|
* Read back a LDO / FET current state.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param index index of the LDO/FET to switch
|
|
* @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state);
|
|
|
|
/**
|
|
* Get access to the error reported when cros_ec_board_init() was called
|
|
*
|
|
* This permits delayed reporting of the EC error if it failed during
|
|
* early init.
|
|
*
|
|
* @return error (0 if there was no error, -ve if there was an error)
|
|
*/
|
|
int cros_ec_get_error(void);
|
|
|
|
/**
|
|
* Returns information from the FDT about the Chrome EC flash
|
|
*
|
|
* @param blob FDT blob to use
|
|
* @param node Node offset to read from
|
|
* @param config Structure to use to return information
|
|
*/
|
|
int cros_ec_decode_ec_flash(const void *blob, int node,
|
|
struct fdt_cros_ec *config);
|
|
|
|
/**
|
|
* Check the current keyboard state, in case recovery mode is requested.
|
|
* This function is for sandbox only.
|
|
*
|
|
* @param ec CROS-EC device
|
|
*/
|
|
void cros_ec_check_keyboard(struct cros_ec_dev *dev);
|
|
|
|
struct i2c_msg;
|
|
/*
|
|
* Tunnel an I2C transfer to the EC
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param port The remote port on EC to use
|
|
* @param msg List of messages to transfer
|
|
* @param nmsgs Number of messages to transfer
|
|
*/
|
|
int cros_ec_i2c_tunnel(struct udevice *dev, int port, struct i2c_msg *msg,
|
|
int nmsgs);
|
|
|
|
#endif
|
|
|