upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/Makefile

2482 lines
85 KiB

#
# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
VERSION = 2010
PATCHLEVEL = 06
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/ppc64/powerpc/ \
-e s/ppc/powerpc/ \
-e s/macppc/powerpc/\
-e s/sh.*/sh/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
# Set shell to bash if possible, otherwise fall back to sh
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi; fi)
export HOSTARCH HOSTOS SHELL
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#
ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD := 1
export REMOTE_BUILD
endif
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src
# Make sure CDPATH settings don't interfere
unexport CDPATH
#########################################################################
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
examples/standalone \
examples/api
.PHONY : $(SUBDIRS)
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# Include autoconf.mk before config.mk so that the config options are available
# to all top level build files. We need the dummy all: target to prevent the
# dependency target in autoconf.mk.dep from being the default.
all:
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif
# load other configuration
include $(TOPDIR)/config.mk
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = $(CPUDIR)/start.o
ifeq ($(CPU),i386)
OBJS += $(CPUDIR)/start16.o
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += $(CPUDIR)/resetvec.o
endif
OBJS := $(addprefix $(obj),$(OBJS))
LIBS = lib/libgeneric.a
LIBS += lib/lzma/liblzma.a
LIBS += lib/lzo/liblzo.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += $(CPUDIR)/lib$(CPU).a
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.a
endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
fs/ubifs/libubifs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/fpga/libfpga.a
LIBS += drivers/gpio/libgpio.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/ubi/libubi.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/phy/libphy.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
LIBS += drivers/power/libpower.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc86xx)
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/twserial/libtws.a
LIBS += drivers/usb/gadget/libusb_gadget.a
LIBS += drivers/usb/host/libusb_host.a
LIBS += drivers/usb/musb/libusb_musb.a
LIBS += drivers/usb/phy/libusb_phy.a
LIBS += drivers/video/libvideo.a
LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
LIBS += lib/libfdt/libfdt.a
LIBS += api/libapi.a
LIBS += post/libpost.a
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
U_BOOT_NAND = $(obj)u-boot-nand.bin
endif
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
#########################################################################
#########################################################################
# Always append ALL so that arch config.mk's can add custom ones
ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
all: $(ALL)
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
-e $(TEXT_BASE) -d $< $@
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
GEN_UBOOT = \
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,u-boot) | \
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
-c common/system_map.c -o $(obj)common/system_map.o
$(GEN_UBOOT) $(obj)common/system_map.o
endif
$(OBJS): depend
$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(SUBDIRS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): depend
$(MAKE) -C $@ all
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
'$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
$(TIMESTAMP_FILE):
@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
updater:
$(MAKE) -C tools/updater all || exit 1
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
$(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include
tags ctags:
ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
etags:
etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
cscope:
find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
cscope -b -q -k
SYSTEM_MAP = \
$(NM) $1 | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
LC_ALL=C sort
$(obj)System.map: $(obj)u-boot
@$(call SYSTEM_MAP,$<) > $(obj)System.map
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
mv $@.tmp $@
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
updater env depend dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
tools:
$(MAKE) -C tools
tools-all:
$(MAKE) -C tools HOST_TOOLS_ALL=y
endif # config.mk
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
%_config:: unconfig
@$(MKCONFIG) -A $(@:_config=)
##%: %_config
## $(MAKE)
#
# Functions to generate common board directory names
#
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
#========================================================================
# PowerPC
#========================================================================
#########################################################################
## MPC5xxx Systems
#########################################################################
digsy_mtc_config \
digsy_mtc_LOWBOOT_config \
digsy_mtc_RAMBOOT_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/digsy_mtc
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
galaxy5200_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
icecube_5200_config \
icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
@[ -z "$(findstring DDR,$@)" ] || \
echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
lite5200b_config \
lite5200b_PM_config \
lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
mcc200_highboot_config \
mcc200_COM12_config \
mcc200_COM12_SDRAM_config \
mcc200_COM12_highboot_config \
mcc200_COM12_highboot_SDRAM_config \
mcc200_highboot_SDRAM_config \
prs200_config \
prs200_DDR_config \
prs200_highboot_config \
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
@[ -z "$(findstring highboot,$@)" ] || \
echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
@[ -n "$(findstring _SDRAM,$@)" ] || \
if [ -n "$(findstring prs200,$@)" ]; \
then \
if [ -z "$(findstring _DDR,$@)" ];\
then \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
fi; \
fi
@[ -z "$(findstring _SDRAM,$@)" ] || \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
@[ -z "$(findstring COM12,$@)" ] || \
echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
@[ -z "$(findstring prs200,$@)" ] || \
echo "#define CONFIG_PRS200" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision
MVSMR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/matrix_vision/mvsmr
@$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision
pcm030_config \
pcm030_LOWBOOT_config: unconfig
@mkdir -p $(obj)include $(obj)board/phytec/pcm030
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring DDR,$@)" ] || \
echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@[ -z "$(findstring ROMBOOT,$@)" ] || \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
TB5200_B_config \
TB5200_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
@[ -n "$(findstring Rev,$@)" ] || \
echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
@[ -z "$(findstring Rev2_,$@)" ] || \
echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
@[ -z "$(findstring lowboot_,$@)" ] || \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
TQM5200_B_config \
TQM5200_B_HIGHBOOT_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h
@[ -z "$(findstring fo300,$@)" ] || \
echo "#define CONFIG_FO300" >>$(obj)include/config.h
@[ -z "$(findstring MiniFAP,$@)" ] || \
echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
@[ -z "$(findstring STK100,$@)" ] || \
echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200_B,$@)" ] || \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200S,$@)" ] || \
{ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
#########################################################################
## MPC512x Systems
#########################################################################
mpc5121ads_config \
mpc5121ads_rev2_config \
: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
#########################################################################
Adder87x_config \
AdderII_config \
AdderUSB_config \
Adder_config \
: unconfig
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
ADS860_config \
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
@$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _SC,$@)" ] || \
echo "#define CONFIG_SC" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
echo "#define CONFIG_100MHz" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVML24_config,$@)" ] || \
echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVMS8_config,$@)" ] || \
echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
MBX_config \
MBX860T_config: unconfig
@$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETVIA_config,$@)" ] || \
echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone
NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_6412_SWAPHOOK_config \
NETTA_SWAPHOOK_config \
NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring ISDN_,$@)" ] || \
echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
@[ -n "$(findstring ISDN_,$@)" ] || \
echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
@[ -z "$(findstring 6412_,$@)" ] || \
echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
@[ -n "$(findstring 6412_,$@)" ] || \
echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETTA2_config,$@)" ] || \
echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring CP850,$@)" ] || \
{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev1,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev2,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_64_LCD_config \
RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _64,$@)" ] || \
echo "#define RPXlite_64MHz" >>$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
SPD823TS_config: unconfig
@$(MKCONFIG) $@ powerpc mpc8xx spd8xx
SXNI855T_config: unconfig
@$(MKCONFIG) $@ powerpc mpc8xx sixnet
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
xtract_8xx = $(subst _LCD,,$1)
FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
TQM823L_LCD_config \
TQM850L_config \
TQM855L_config \
TQM860L_config \
TQM862L_config \
TQM823M_config \
TQM850M_config \
TQM855M_config \
TQM860M_config \
TQM862M_config \
TQM866M_config \
TQM885D_config \
TK885D_config \
virtlab2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
@$(MKCONFIG) $@ powerpc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
#########################################################################
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
canyonlands_config \
glacier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
canyonlands_nand_config \
glacier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@mkdir -p $(obj)include
@echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
@echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
@$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd
fx12mm_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0xFFCB0000" \
>> $(obj)board/avnet/fx12mm/config.tmp
@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
fx12mm_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/fx12mm/config.tmp
@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
devconcenter_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
hcu4_config \
hcu5_config \
mcu25_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
@$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
@$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
OCRTC_config \
ORSG_config: unconfig
@$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring EVB_BA,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
@[ -z "$(findstring EVB_ME,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
@[ -z "$(findstring EVB_HI,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/sequoia
@mkdir -p $(obj)nand_spl/board/amcc/sequoia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_ramboot_config \
rainier_ramboot_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/sequoia
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0xFF1C0000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
W7OLMC_config \
W7OLMG_config: unconfig
@$(MKCONFIG) $@ powerpc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
@$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc
xilinx-ppc405-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc405-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
xilinx-ppc440-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
#########################################################################
## MPC824x Systems
#########################################################################
eXalion_config: unconfig
@$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
CPC45_config \
CPC45_ROMBOOT_config: unconfig
@mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
@$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
#linkstation_HDLAN_config \
# Remove this line when HDLAN is fixed
linkstation_HGLAN_config: unconfig
@mkdir -p $(obj)include
@case $@ in \
*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac
@$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
Sandpoint8240_config: unconfig
@$(MKCONFIG) $@ powerpc mpc824x sandpoint
Sandpoint8245_config: unconfig
@$(MKCONFIG) $@ powerpc mpc824x sandpoint
#########################################################################
## MPC8260 Systems
#########################################################################
cogent_mpc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
@mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
@$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86
CPU87_config \
CPU87_ROMBOOT_config: unconfig
@mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
@$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87
ep8248_config \
ep8248E_config : unconfig
@$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
ISPAN_config \
ISPAN_REVB_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
MPC8272ADS_lowboot_config \
PQ2FADS_config \
PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/muas3001
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
PM825_ROMBOOT_config \
PM825_BIGFLASH_config \
PM825_ROMBOOT_BIGFLASH_config \
PM826_config \
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring PM825_,$@)" ] ; then \
echo "#define CONFIG_PCI" >$(obj)include/config.h ; \
else \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
@$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
TQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig
@mkdir -p $(obj)include
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
fi; \
if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
#########################################################################
## Coldfire
#########################################################################
astro_mcf5373l_config \
astro_mcf5373l_RAM_config : unconfig
@$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
M52277EVB_config \
M52277EVB_spansion_config \
M52277EVB_stmicro_config : unconfig
@case "$@" in \
M52277EVB_config) FLASH=SPANSION;; \
M52277EVB_spansion_config) FLASH=SPANSION;; \
M52277EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi
@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
@case "$@" in \
M5235EVB_config) FLASH=16;; \
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
cobra5272_config : unconfig
@$(MKCONFIG) $@ m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
M5373EVB_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54451EVB_config \
M54451EVB_stmicro_config : unconfig
@case "$@" in \
M54451EVB_config) FLASH=NOR;; \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "NOR" ] ; then \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
@$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config \
M54455EVB_stm33_config : unconfig
@case "$@" in \
M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
@$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config : unconfig
@case "$@" in \
M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config : unconfig
@case "$@" in \
M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
MPC8313ERDB_NAND_66_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
@if [ "$(findstring _NAND_,$@)" ] ; then \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
@$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
@$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
@$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
@$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/sheldon/simpc8313
@if [ "$(findstring _LP_,$@)" ] ; then \
echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SP_,$@)" ] ; then \
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
fi ;
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
caddy2_config \
vme8349_config: unconfig
@$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
#########################################################################
MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
@$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
@if [ -z "$(findstring _33_,$@)" ] ; then \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
@$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
@$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
@$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale
P1011RDB_config \
P1011RDB_NAND_config \
P1011RDB_SDCARD_config \
P1011RDB_SPIFLASH_config \
P1020RDB_config \
P1020RDB_NAND_config \
P1020RDB_SDCARD_config \
P1020RDB_SPIFLASH_config \
P2010RDB_config \
P2010RDB_NAND_config \
P2010RDB_SDCARD_config \
P2010RDB_SPIFLASH_config \
P2020RDB_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config: unconfig
@$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
@$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560
sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
@$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
@$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560
stxssa_config \
stxssa_4M_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
TQM8548_config \
TQM8548_AG_config \
TQM8548_BE_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
@BTYPE=$(@:_config=); \
CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
@$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
#########################################################################
MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _36BIT_,$@)" ] ; then \
echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
#########################################################################
## 74xx/7xx Systems
#########################################################################
EVB64260_config \
EVB64260_750CX_config: unconfig
@$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 750_,$@)" ] ; then \
echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
@$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2
#========================================================================
# ARM
#========================================================================
#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################
CPUAT91_RAM_config \
CPUAT91_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
#########################################################################
## ARM926EJ-S Systems
#########################################################################
at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
at91sam9260ek_config \
at91sam9g20ek_nandflash_config \
at91sam9g20ek_dataflash_cs0_config \
at91sam9g20ek_dataflash_cs1_config \
at91sam9g20ek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 9g20,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9xeek_nandflash_config \
at91sam9xeek_dataflash_cs0_config \
at91sam9xeek_dataflash_cs1_config \
at91sam9xeek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
at91sam9261ek_config \
at91sam9g10ek_nandflash_config \
at91sam9g10ek_dataflash_cs0_config \
at91sam9g10ek_dataflash_cs3_config \
at91sam9g10ek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 9g10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
at91sam9263ek_nandflash_config \
at91sam9263ek_dataflash_config \
at91sam9263ek_dataflash_cs0_config \
at91sam9263ek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring norflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring norflash_boot,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
at91sam9rlek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
CPU9G20_128M_config \
CPU9G20_config \
CPU9260_128M_config \
CPU9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91
at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
at91sam9m10g45ek_dataflash_cs0_config \
at91sam9m10g45ek_config \
at91sam9g45ekes_nandflash_config \
at91sam9g45ekes_dataflash_config \
at91sam9g45ekes_dataflash_cs0_config \
at91sam9g45ekes_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 9m10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9G20_config \
TNY_A9260_NANDFLASH_config \
TNY_A9260_EEPROM_config \
TNY_A9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
ap7_config \
ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
integratorcp_config \
cp_config \
cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
nhk8815_config \
nhk8815_onenand_config: unconfig
@mkdir -p $(obj)include
@ > $(obj)include/config.h
@if [ "$(findstring _onenand, $@)" ] ; then \
echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
spear300_config \
spear310_config \
spear320_config : unconfig
@$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
spear600_config : unconfig
@$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/trab
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
tx25_config : unconfig
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
edb9301_config \
edb9302_config \
edb9302a_config \
edb9307_config \
edb9307a_config \
edb9312_config \
edb9315_config \
edb9315a_config: unconfig
@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/armltd/versatile/split_by_variant.sh $@
#########################################################################
## XScale Systems
#########################################################################
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
polaris_config \
trizepsiv_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring polaris,$@)" ] ; then \
echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
#########################################################################
## ARM1136 Systems
#########################################################################
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
imx31_phycore_eet_config \
imx31_phycore_config : unconfig
@mkdir -p $(obj)include
@if [ -n "$(findstring _eet_,$@)" ]; then \
echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
mx31pdk_config \
mx31pdk_nand_config : unconfig
@mkdir -p $(obj)include
@if [ -n "$(findstring _nand_,$@)" ]; then \
echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \
else \
echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config \
smdk6400_config : unconfig
@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
else \
echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
fi
@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
@[ -z "$(findstring _133MHz,$@)" ] || \
echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
@[ -z "$(findstring _150MHz,$@)" ] || \
echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a incaip mips mips incaip
vct_premium_config \
vct_premium_small_config \
vct_premium_onenand_config \
vct_premium_onenand_small_config \
vct_platinum_config \
vct_platinum_small_config \
vct_platinum_onenand_config \
vct_platinum_onenand_small_config \
vct_platinumavc_config \
vct_platinumavc_small_config \
vct_platinumavc_onenand_config \
vct_platinumavc_onenand_small_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _premium,$@)" ] || \
echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
@[ -z "$(findstring _platinum_,$@)" ] || \
echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
@[ -z "$(findstring _platinumavc,$@)" ] || \
echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
@[ -z "$(findstring _onenand,$@)" ] || \
echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
@[ -z "$(findstring _small,$@)" ] || \
echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a vct mips mips vct micronas
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a $@ mips mips gth2
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
qemu_mips_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
#========================================================================
# Nios
#========================================================================
#########################################################################
## Nios-II
#########################################################################
# nios2 generic boards
NIOS2_GENERIC = nios2-generic
$(NIOS2_GENERIC:%=%_config) : unconfig
@$(MKCONFIG) $@ nios2 nios2 nios2-generic altera
#========================================================================
# Blackfin
#========================================================================
bf527-ezkit-v2_config : unconfig
@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
bf527-ezkit blackfin blackfin bf527-ezkit
#========================================================================
# SH3 (SuperH)
#========================================================================
#########################################################################
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas
#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh3 mpr2
ms7720se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 MigoR renesas
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 ms7750se
ms7722se_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 ms7722se
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 r2dplus renesas
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 r7780mp renesas
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas
sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/renesas/sh7785lcr
@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
@if [ "$(findstring 32bit, $@)" ] ; then \
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas
espt_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
@$(MKCONFIG) -a $@ sh sh4 espt
#########################################################################
#########################################################################
clean:
@rm -f $(obj)examples/standalone/82559_eeprom \
$(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/eepro100_eeprom \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)examples/standalone/mem_to_mem_idma2intr \
$(obj)examples/standalone/sched \
$(obj)examples/standalone/smc91111_eeprom \
$(obj)examples/standalone/test_burst \
$(obj)examples/standalone/timer
@rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mkimage $(obj)tools/mpc86x_clk \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)arch/blackfin/lib/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
@rm -f $(ONENAND_BIN)
@rm -f $(obj)onenand_ipl/u-boot.lds
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
| xargs rm -f
clobber: clean
@find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
else
mrproper \
distclean: clobber unconfig
rm -rf $(obj)*
endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################