upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
536 lines
12 KiB
536 lines
12 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2001-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/byteorder/swab.h>
|
|
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/* Board support for 1 or 2 flash devices */
|
|
#define FLASH_PORT_WIDTH32
|
|
#undef FLASH_PORT_WIDTH16
|
|
|
|
#ifdef FLASH_PORT_WIDTH16
|
|
#define FLASH_PORT_WIDTH ushort
|
|
#define FLASH_PORT_WIDTHV vu_short
|
|
#define SWAP(x) __swab16(x)
|
|
#else
|
|
#define FLASH_PORT_WIDTH ulong
|
|
#define FLASH_PORT_WIDTHV vu_long
|
|
#define SWAP(x) __swab32(x)
|
|
#endif
|
|
|
|
/* Intel-compatible flash ID */
|
|
#define INTEL_COMPAT 0x00890089
|
|
#define INTEL_ALT 0x00B000B0
|
|
|
|
/* Intel-compatible flash commands */
|
|
#define INTEL_PROGRAM 0x00100010
|
|
#define INTEL_ERASE 0x00200020
|
|
#define INTEL_CLEAR 0x00500050
|
|
#define INTEL_LOCKBIT 0x00600060
|
|
#define INTEL_PROTECT 0x00010001
|
|
#define INTEL_STATUS 0x00700070
|
|
#define INTEL_READID 0x00900090
|
|
#define INTEL_CONFIRM 0x00D000D0
|
|
#define INTEL_RESET 0xFFFFFFFF
|
|
|
|
/* Intel-compatible flash status bits */
|
|
#define INTEL_FINISHED 0x00800080
|
|
#define INTEL_OK 0x00800080
|
|
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define mb() __asm__ __volatile__ ("" : : : "memory")
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static ulong flash_get_size (FPW *addr, flash_info_t *info);
|
|
static int write_data (flash_info_t *info, ulong dest, FPW data);
|
|
static void flash_get_offsets (ulong base, flash_info_t *info);
|
|
void inline spin_wheel (void);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
int i;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
switch (i) {
|
|
case 0:
|
|
flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
|
|
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
|
|
break;
|
|
case 1:
|
|
flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
|
|
flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
|
|
break;
|
|
default:
|
|
panic ("configured to many flash banks!\n");
|
|
break;
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
/* Protect monitor and environment sectors
|
|
*/
|
|
flash_protect ( FLAG_PROTECT_SET,
|
|
CONFIG_SYS_FLASH_BASE,
|
|
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
|
|
&flash_info[0] );
|
|
|
|
flash_protect ( FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
|
|
|
|
return size;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_get_offsets (ulong base, flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
return;
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
|
|
info->protect[i] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_INTEL:
|
|
printf ("INTEL ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F128J3A:
|
|
printf ("28F128J3A\n");
|
|
break;
|
|
|
|
case FLASH_28F640J3A:
|
|
printf ("28F640J3A\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
static ulong flash_get_size (FPW *addr, flash_info_t *info)
|
|
{
|
|
volatile FPW value;
|
|
|
|
/* Write auto select command: read Manufacturer ID */
|
|
addr[0x5555] = (FPW) 0x00AA00AA;
|
|
addr[0x2AAA] = (FPW) 0x00550055;
|
|
addr[0x5555] = (FPW) 0x00900090;
|
|
|
|
mb ();
|
|
value = addr[0];
|
|
|
|
switch (value) {
|
|
|
|
case (FPW) INTEL_MANUFACT:
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
break;
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (0); /* no or unknown flash */
|
|
}
|
|
|
|
mb ();
|
|
value = addr[1]; /* device ID */
|
|
|
|
switch (value) {
|
|
|
|
case (FPW) INTEL_ID_28F128J3A:
|
|
info->flash_id += FLASH_28F128J3A;
|
|
info->sector_count = 128;
|
|
info->size = 0x02000000;
|
|
break; /* => 32 MB */
|
|
|
|
case (FPW) INTEL_ID_28F640J3A:
|
|
info->flash_id += FLASH_28F640J3A;
|
|
info->sector_count = 64;
|
|
info->size = 0x01000000;
|
|
break; /* => 16 MB */
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
|
|
printf ("** ERROR: sector count %d > max (%d) **\n",
|
|
info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
|
|
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
}
|
|
|
|
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
int flag, prot, sect;
|
|
ulong type, start, last;
|
|
int rcode = 0;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
type = (info->flash_id & FLASH_VENDMASK);
|
|
if ((type != FLASH_MAN_INTEL)) {
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
FPWV *addr = (FPWV *) (info->start[sect]);
|
|
FPW status;
|
|
|
|
printf ("Erasing sector %2d ... ", sect);
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
*addr = (FPW) 0x00500050; /* clear status register */
|
|
*addr = (FPW) 0x00200020; /* erase setup */
|
|
*addr = (FPW) 0x00D000D0; /* erase confirm */
|
|
|
|
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
*addr = (FPW) 0x00B000B0; /* suspend erase */
|
|
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
*addr = 0x00500050; /* clear status register cmd. */
|
|
*addr = 0x00FF00FF; /* resest to read mode */
|
|
|
|
printf (" done\n");
|
|
}
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
* 4 - Flash not identified
|
|
*/
|
|
|
|
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp;
|
|
FPW data;
|
|
int count, i, l, rc, port_width;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
return 4;
|
|
}
|
|
/* get lower word aligned address */
|
|
#ifdef FLASH_PORT_WIDTH16
|
|
wp = (addr & ~1);
|
|
port_width = 2;
|
|
#else
|
|
wp = (addr & ~3);
|
|
port_width = 4;
|
|
#endif
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
}
|
|
for (; i < port_width && cnt > 0; ++i) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt == 0 && i < port_width; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
}
|
|
|
|
if ((rc = write_data (info, wp, SWAP (data))) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += port_width;
|
|
}
|
|
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
count = 0;
|
|
while (cnt >= port_width) {
|
|
data = 0;
|
|
for (i = 0; i < port_width; ++i) {
|
|
data = (data << 8) | *src++;
|
|
}
|
|
if ((rc = write_data (info, wp, SWAP (data))) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += port_width;
|
|
cnt -= port_width;
|
|
if (count++ > 0x800) {
|
|
spin_wheel ();
|
|
count = 0;
|
|
}
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
}
|
|
for (; i < port_width; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
}
|
|
|
|
return (write_data (info, wp, SWAP (data)));
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word or halfword to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_data (flash_info_t *info, ulong dest, FPW data)
|
|
{
|
|
FPWV *addr = (FPWV *) dest;
|
|
ulong status;
|
|
int flag;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*addr & data) != data) {
|
|
printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
|
|
return (2);
|
|
}
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
*addr = (FPW) 0x00400040; /* write setup */
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
/* wait while polling the status register */
|
|
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
|
|
return (0);
|
|
}
|
|
|
|
void inline spin_wheel (void)
|
|
{
|
|
static int p = 0;
|
|
static char w[] = "\\/-";
|
|
|
|
printf ("\010%c", w[p]);
|
|
(++p == 3) ? (p = 0) : 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Set/Clear sector's lock bit, returns:
|
|
* 0 - OK
|
|
* 1 - Error (timeout, voltage problems, etc.)
|
|
*/
|
|
int flash_real_protect(flash_info_t *info, long sector, int prot)
|
|
{
|
|
int i;
|
|
int rc = 0;
|
|
vu_long *addr = (vu_long *)(info->start[sector]);
|
|
int flag = disable_interrupts();
|
|
|
|
*addr = INTEL_CLEAR; /* Clear status register */
|
|
if (prot) { /* Set sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
}
|
|
else { /* Clear sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* All sectors lock bits */
|
|
*addr = INTEL_CONFIRM; /* clear */
|
|
}
|
|
|
|
reset_timer_masked ();
|
|
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
|
|
if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
|
|
printf("Flash lock bit operation timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (*addr != INTEL_OK) {
|
|
printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
|
|
(uint)addr, (uint)*addr);
|
|
rc = 1;
|
|
}
|
|
|
|
if (!rc)
|
|
info->protect[sector] = prot;
|
|
|
|
/*
|
|
* Clear lock bit command clears all sectors lock bits, so
|
|
* we have to restore lock bits of protected sectors.
|
|
*/
|
|
if (!prot)
|
|
{
|
|
for (i = 0; i < info->sector_count; i++)
|
|
{
|
|
if (info->protect[i])
|
|
{
|
|
reset_timer_masked ();
|
|
addr = (vu_long *)(info->start[i]);
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
|
|
{
|
|
if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT)
|
|
{
|
|
printf("Flash lock bit operation timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
*addr = INTEL_RESET; /* Reset to read array mode */
|
|
|
|
return rc;
|
|
}
|
|
|