upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
186 lines
4.4 KiB
186 lines
4.4 KiB
/*
|
|
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
* Scott McNutt <smcnutt@psyent.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
/*************************************************************************
|
|
* RESTART
|
|
************************************************************************/
|
|
|
|
.text
|
|
.global _start
|
|
|
|
_start:
|
|
wrctl status, r0 /* Disable interrupts */
|
|
/* ICACHE INIT -- only the icache line at the reset address
|
|
* is invalidated at reset. So the init must stay within
|
|
* the cache line size (8 words). If GERMS is used, we'll
|
|
* just be invalidating the cache a second time. If cache
|
|
* is not implemented initi behaves as nop.
|
|
*/
|
|
ori r4, r0, %lo(CONFIG_SYS_ICACHELINE_SIZE)
|
|
movhi r5, %hi(CONFIG_SYS_ICACHE_SIZE)
|
|
ori r5, r5, %lo(CONFIG_SYS_ICACHE_SIZE)
|
|
0: initi r5
|
|
sub r5, r5, r4
|
|
bgt r5, r0, 0b
|
|
br _except_end /* Skip the tramp */
|
|
|
|
/* EXCEPTION TRAMPOLINE -- the following gets copied
|
|
* to the exception address (below), but is otherwise at the
|
|
* default exception vector offset (0x0020).
|
|
*/
|
|
_except_start:
|
|
movhi et, %hi(_exception)
|
|
ori et, et, %lo(_exception)
|
|
jmp et
|
|
_except_end:
|
|
|
|
/* INTERRUPTS -- for now, all interrupts masked and globally
|
|
* disabled.
|
|
*/
|
|
wrctl ienable, r0 /* All disabled */
|
|
|
|
/* DCACHE INIT -- if dcache not implemented, initd behaves as
|
|
* nop.
|
|
*/
|
|
movhi r4, %hi(CONFIG_SYS_DCACHELINE_SIZE)
|
|
ori r4, r4, %lo(CONFIG_SYS_DCACHELINE_SIZE)
|
|
movhi r5, %hi(CONFIG_SYS_DCACHE_SIZE)
|
|
ori r5, r5, %lo(CONFIG_SYS_DCACHE_SIZE)
|
|
mov r6, r0
|
|
1: initd 0(r6)
|
|
add r6, r6, r4
|
|
bltu r6, r5, 1b
|
|
|
|
/* RELOCATE CODE, DATA & COMMAND TABLE -- the following code
|
|
* assumes code, data and the command table are all
|
|
* contiguous. This lets us relocate everything as a single
|
|
* block. Make sure the linker script matches this ;-)
|
|
*/
|
|
nextpc r4
|
|
_cur: movhi r5, %hi(_cur - _start)
|
|
ori r5, r5, %lo(_cur - _start)
|
|
sub r4, r4, r5 /* r4 <- cur _start */
|
|
mov r8, r4
|
|
movhi r5, %hi(_start)
|
|
ori r5, r5, %lo(_start) /* r5 <- linked _start */
|
|
beq r4, r5, 3f
|
|
|
|
movhi r6, %hi(_edata)
|
|
ori r6, r6, %lo(_edata)
|
|
2: ldwio r7, 0(r4)
|
|
addi r4, r4, 4
|
|
stwio r7, 0(r5)
|
|
addi r5, r5, 4
|
|
bne r5, r6, 2b
|
|
3:
|
|
|
|
/* ZERO BSS/SBSS -- bss and sbss are assumed to be adjacent
|
|
* and between __bss_start and __bss_end.
|
|
*/
|
|
movhi r5, %hi(__bss_start)
|
|
ori r5, r5, %lo(__bss_start)
|
|
movhi r6, %hi(__bss_end)
|
|
ori r6, r6, %lo(__bss_end)
|
|
beq r5, r6, 5f
|
|
|
|
4: stwio r0, 0(r5)
|
|
addi r5, r5, 4
|
|
bne r5, r6, 4b
|
|
5:
|
|
|
|
/* JUMP TO RELOC ADDR */
|
|
movhi r4, %hi(_reloc)
|
|
ori r4, r4, %lo(_reloc)
|
|
jmp r4
|
|
_reloc:
|
|
|
|
/* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
|
|
* exception address. Define CONFIG_ROM_STUBS to prevent
|
|
* the copy (e.g. exception in flash or in other
|
|
* softare/firmware component).
|
|
*/
|
|
#if !defined(CONFIG_ROM_STUBS)
|
|
movhi r4, %hi(_except_start)
|
|
ori r4, r4, %lo(_except_start)
|
|
movhi r5, %hi(_except_end)
|
|
ori r5, r5, %lo(_except_end)
|
|
movhi r6, %hi(CONFIG_SYS_EXCEPTION_ADDR)
|
|
ori r6, r6, %lo(CONFIG_SYS_EXCEPTION_ADDR)
|
|
beq r4, r6, 7f /* Skip if at proper addr */
|
|
|
|
6: ldwio r7, 0(r4)
|
|
stwio r7, 0(r6)
|
|
addi r4, r4, 4
|
|
addi r6, r6, 4
|
|
bne r4, r5, 6b
|
|
7:
|
|
#endif
|
|
|
|
/* STACK INIT -- zero top two words for call back chain.
|
|
*/
|
|
movhi sp, %hi(CONFIG_SYS_INIT_SP)
|
|
ori sp, sp, %lo(CONFIG_SYS_INIT_SP)
|
|
addi sp, sp, -8
|
|
stw r0, 0(sp)
|
|
stw r0, 4(sp)
|
|
mov fp, sp
|
|
|
|
/*
|
|
* Call board_init -- never returns
|
|
*/
|
|
movhi r4, %hi(board_init@h)
|
|
ori r4, r4, %lo(board_init@h)
|
|
callr r4
|
|
|
|
/* NEVER RETURNS -- but branch to the _start just
|
|
* in case ;-)
|
|
*/
|
|
br _start
|
|
|
|
|
|
/*
|
|
* dly_clks -- Nios2 (like Nios1) doesn't have a timebase in
|
|
* the core. For simple delay loops, we do our best by counting
|
|
* instruction cycles.
|
|
*
|
|
* Instruction performance varies based on the core. For cores
|
|
* with icache and static/dynamic branch prediction (II/f, II/s):
|
|
*
|
|
* Normal ALU (e.g. add, cmp, etc): 1 cycle
|
|
* Branch (correctly predicted, taken): 2 cycles
|
|
* Negative offset is predicted (II/s).
|
|
*
|
|
* For cores without icache and no branch prediction (II/e):
|
|
*
|
|
* Normal ALU (e.g. add, cmp, etc): 6 cycles
|
|
* Branch (no prediction): 6 cycles
|
|
*
|
|
* For simplicity, if an instruction cache is implemented we
|
|
* assume II/f or II/s. Otherwise, we use the II/e.
|
|
*
|
|
*/
|
|
.globl dly_clks
|
|
|
|
dly_clks:
|
|
|
|
#if (CONFIG_SYS_ICACHE_SIZE > 0)
|
|
subi r4, r4, 3 /* 3 clocks/loop */
|
|
#else
|
|
subi r4, r4, 12 /* 12 clocks/loop */
|
|
#endif
|
|
bge r4, r0, dly_clks
|
|
ret
|
|
|
|
.data
|
|
.globl version_string
|
|
|
|
version_string:
|
|
.ascii U_BOOT_VERSION_STRING, "\0"
|
|
|