upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/malta.h

126 lines
2.9 KiB

/*
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _MALTA_CONFIG_H
#define _MALTA_CONFIG_H
#include <asm/addrspace.h>
#include <asm/malta.h>
/*
* System configuration
*/
#define CONFIG_MALTA
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MEMSIZE_IN_BYTES
#define CONFIG_PCI
#define CONFIG_PCI_GT64120
#define CONFIG_PCI_MSC01
#define CONFIG_PCI_PNP
#define CONFIG_PCNET
#define CONFIG_PCNET_79C973
#define PCNET_HAS_PROM
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_MC146818
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
/*
* CPU Configuration
*/
#define CONFIG_SYS_MHZ 250 /* arbitrary value */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
/*
* Memory map
*/
#define CONFIG_SYS_TEXT_BASE 0xbe000000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024)
/*
* Console configuration
*/
#if defined(CONFIG_SYS_LITTLE_ENDIAN)
#define CONFIG_SYS_PROMPT "maltael # "
#else
#define CONFIG_SYS_PROMPT "malta # "
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
/*
* Serial driver
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (115200 * 16)
#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE)
#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE)
#define CONFIG_CONS_INDEX 1
/*
* Flash configuration
*/
#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE)
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*
* Environment
*/
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
/*
* Commands
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */
#endif /* _MALTA_CONFIG_H */