upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
518 lines
15 KiB
518 lines
15 KiB
/*
|
|
* (C) Copyright 2003-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2005-2007
|
|
* Modified for InterControl digsyMTC MPC5200 board by
|
|
* Frank Bodammer, GCD Hard- & Software GmbH,
|
|
* frank.bodammer@gcd-solutions.de
|
|
*
|
|
* (C) Copyright 2009 Semihalf
|
|
* Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software\; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation\; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY\; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program\; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
|
|
#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFFF00000 boot high (standard configuration)
|
|
* 0xFE000000 boot low
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{ 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
/*
|
|
* Partitions
|
|
*/
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_BZIP2
|
|
|
|
/*
|
|
* Video
|
|
*/
|
|
#define CONFIG_VIDEO
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_MB862xx
|
|
#define CONFIG_VIDEO_MB862xx_ACCEL
|
|
#define CONFIG_VIDEO_CORALP
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_VIDEO_BMP_GZIP
|
|
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
|
|
|
|
/* Coral-PA clock frequency, geo and other both 133MHz */
|
|
#define CONFIG_SYS_MB862xx_CCF 0x00050000
|
|
/* Video SDRAM parameters */
|
|
#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
|
|
#endif
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_CMD_BMP
|
|
#endif
|
|
#define CONFIG_CMD_DFL
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_SAVES
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_USB
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
|
|
#define CONFIG_SYS_LOWBOOT 1
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 1
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"fw_image=digsyMPC.img\0" \
|
|
"mtcb_start=mtc led diag orange; run mtcb_1\0" \
|
|
"mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \
|
|
"do mtc led $x; done\0" \
|
|
"mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \
|
|
"else run mtcb_fw; fi\0" \
|
|
"mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \
|
|
"else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \
|
|
"mtcb_update=mtc led user1 orange;" \
|
|
"while mtc key; do ; done; run mtcb_2;\0" \
|
|
"mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \
|
|
"mtcb_usb1=if fatload usb 0 400000 script.img; " \
|
|
"then run mtcb_doscript; else run mtcb_usb2; fi\0" \
|
|
"mtcb_usb2=if fatload usb 0 400000 $fw_image; " \
|
|
"then run mtcb_dousb; else run mtcb_ide; fi\0" \
|
|
"mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \
|
|
"run mtcb_wait_flickr mtcb_ds_1;\0" \
|
|
"mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \
|
|
"source 400000; else run mtcb_error; fi\0" \
|
|
"mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \
|
|
"mtcb_du_1=if imi 400000; then run mtcb_du_2; " \
|
|
"else run mtcb_error; fi\0" \
|
|
"mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \
|
|
"run mtcb_checkfw\0" \
|
|
"mtcb_checkfw=if imi ff000000; then run mtcb_success; " \
|
|
"else run mtcb_error; fi\0" \
|
|
"mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
|
|
"mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \
|
|
"mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
|
|
"mtcb_uledflckr=mtc led user1 orange 11\0" \
|
|
"mtcb_error=mtc led user1 red\0" \
|
|
"mtcb_clear=erase ff000000 ff0fffff\0" \
|
|
"mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \
|
|
"mtcb_success=mtc led user1 green\0" \
|
|
"mtcb_ide=if fatload ide 0 400000 $fw_image;" \
|
|
"then run mtcb_doide; else run mtcb_error; fi\0" \
|
|
"mtcb_doide=mtc led user2 green 1;" \
|
|
"run mtcb_wait_flickr mtcb_di_1;\0" \
|
|
"mtcb_di_1=if imi 400000; then run mtcb_di_2;" \
|
|
"else run mtcb_error; fi\0" \
|
|
"mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \
|
|
"ramdisk_num_sector=16\0" \
|
|
"flash_base=ff000000\0" \
|
|
"flashdisk_size=e00000\0" \
|
|
"env_sector=fff60000\0" \
|
|
"flashdisk_start=ff100000\0" \
|
|
"load_cmd=tftp 400000 digsyMPC.img\0" \
|
|
"clear_cmd=erase ff000000 ff0fffff\0" \
|
|
"flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \
|
|
"update_cmd=run load_cmd; " \
|
|
"iminfo 400000; " \
|
|
"run clear_cmd flash_cmd; " \
|
|
"iminfo ff000000\0" \
|
|
"spi_driver=yes\0" \
|
|
"spi_watchdog=no\0" \
|
|
"ftps_start=yes\0" \
|
|
"ftps_user1=admin\0" \
|
|
"ftps_pass1=admin\0" \
|
|
"ftps_base1=/\0" \
|
|
"ftps_home1=/\0" \
|
|
"plc_sio_srv=no\0" \
|
|
"plc_sio_baud=57600\0" \
|
|
"plc_sio_parity=no\0" \
|
|
"plc_sio_stop=1\0" \
|
|
"plc_sio_com=2\0" \
|
|
"plc_eth_srv=yes\0" \
|
|
"plc_eth_port=1200\0" \
|
|
"plc_root=/ide/\0" \
|
|
"diag_level=0\0" \
|
|
"webvisu=no\0" \
|
|
"plc_can1_routing=no\0" \
|
|
"plc_can1_baudrate=250\0" \
|
|
"plc_can2_routing=no\0" \
|
|
"plc_can2_baudrate=250\0" \
|
|
"plc_can3_routing=no\0" \
|
|
"plc_can3_baudrate=250\0" \
|
|
"plc_can4_routing=no\0" \
|
|
"plc_can4_baudrate=250\0" \
|
|
"netdev=eth0\0" \
|
|
"console=ttyPSC0\0" \
|
|
"kernel_addr_r=400000\0" \
|
|
"fdt_addr_r=600000\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
"${netmask}:${hostname}:${netdev}:off panic=1\0" \
|
|
"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
|
|
"rootpath=/opt/eldk/ppc_6xx\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
|
|
"tftp ${fdt_addr_r} ${fdt_file};" \
|
|
"run nfsargs addip addcons;" \
|
|
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
"load=tftp 200000 ${u-boot}\0" \
|
|
"update=protect off FFF00000 +${filesize};" \
|
|
"erase FFF00000 +${filesize};" \
|
|
"cp.b 200000 FFF00000 ${filesize};" \
|
|
"protect on FFF00000 +${filesize}\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run mtcb_start"
|
|
|
|
/*
|
|
* SPI configuration
|
|
*/
|
|
#define CONFIG_HARD_SPI 1
|
|
#define CONFIG_MPC52XX_SPI 1
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1
|
|
#define CONFIG_SYS_I2C_MODULE 1
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#if defined(CONFIG_DIGSY_REV5)
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x56
|
|
#define CONFIG_RTC_RV3029
|
|
/* Enable 5k Ohm trickle charge resistor */
|
|
#define CONFIG_SYS_RV3029_TCR 0x20
|
|
#else
|
|
#define CONFIG_RTC_DS1337
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */
|
|
#endif
|
|
|
|
/* ExBo I2C Addresses */
|
|
#if defined(CONFIG_DIGSY_REV5)
|
|
#define CONFIG_SYS_EXBO_EE_I2C_ADDRESS 0x54
|
|
#else
|
|
#define CONFIG_SYS_EXBO_EE_I2C_ADDRESS 0x56
|
|
#endif
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
|
|
#if defined(CONFIG_DIGSY_REV5)
|
|
#define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
|
|
CONFIG_SYS_FLASH_BASE_CS1}
|
|
#define CONFIG_SYS_UPDATE_FLASH_SIZE
|
|
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
|
|
#else
|
|
#define CONFIG_SYS_FLASH_BASE 0xFF000000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
#define CONFIG_FLASH_16BIT
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_SYS_FLASH_SIZE 0x01000000
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
#define OF_SOC "soc5200@f0000000"
|
|
#define OF_TBCLK (bd->bi_busfreq / 4)
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#if defined(CONFIG_LOWBOOT)
|
|
#define CONFIG_ENV_ADDR 0xFF060000
|
|
#else /* CONFIG_LOWBOOT */
|
|
#define CONFIG_ENV_ADDR 0xFFF60000
|
|
#endif /* CONFIG_LOWBOOT */
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#if !defined(CONFIG_SYS_LOWBOOT)
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
#else
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
|
|
#endif
|
|
|
|
/*
|
|
* Use SRAM until RAM will be available
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
#define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
|
#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
#if defined(CONFIG_DIGSY_REV5)
|
|
#define CONFIG_PHY_ADDR 0x01
|
|
#else
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
#endif
|
|
#define CONFIG_PHY_RESET_DELAY 1000
|
|
|
|
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
|
|
|
/*
|
|
* GPIO configuration
|
|
* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
|
|
* Bit 0 (mask 0x80000000) : 0x1
|
|
* SPI on Tmr2/3/4/5 pins
|
|
* Bit 2:3 (mask 0x30000000) : 0x2
|
|
* ATA cs0/1 on csb_4/5
|
|
* Bit 6:7 (mask 0x03000000) : 0x2
|
|
* Ethernet 100Mbit with MD
|
|
* Bits 12:15 (mask 0x000f0000): 0x5
|
|
* USB - Two UARTs
|
|
* Bits 18:19 (mask 0x00003000) : 0x2
|
|
* PSC3 - USB2 on PSC3
|
|
* Bits 20:23 (mask 0x00000f00) : 0x1
|
|
* PSC2 - CAN1&2 on PSC2 pins
|
|
* Bits 25:27 (mask 0x00000070) : 0x1
|
|
* PSC1 - AC97 functionality
|
|
* Bits 29:31 (mask 0x00000007) : 0x2
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR " "
|
|
|
|
#define CONFIG_LOOPW 1
|
|
#define CONFIG_MX_CYCLIC 1
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
#define CONFIG_SYS_MAXARGS 32
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000
|
|
#define CONFIG_SYS_MEMTEST_START 0x00010000
|
|
#define CONFIG_SYS_MEMTEST_END 0x019fffff
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00100000
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_CS1 1
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
#if defined(CONFIG_SYS_LOWBOOT)
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CS4_START 0x60000000
|
|
#define CONFIG_SYS_CS4_SIZE 0x1000
|
|
#define CONFIG_SYS_CS4_CFG 0x0008FC00
|
|
|
|
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#define CONFIG_SYS_CS0_CFG 0x0002DD00
|
|
|
|
#if defined(CONFIG_DIGSY_REV5)
|
|
#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1
|
|
#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#define CONFIG_SYS_CS1_CFG 0x0002DD00
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x11111111
|
|
|
|
#if !defined(CONFIG_SYS_LOWBOOT)
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
|
|
#else
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000100
|
|
#endif
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_OHCI_BE_CONTROLLER
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
#define CONFIG_USB_CLOCK 0x00013333
|
|
#define CONFIG_USB_CONFIG 0x00002000
|
|
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
|
|
/*
|
|
* IDE/ATA
|
|
*/
|
|
#define CONFIG_IDE_RESET
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CONFIG_SYS_ATA_CS_ON_I2C2
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
#define CONFIG_ATAPI 1
|
|
#define CONFIG_LBA48 1
|
|
|
|
#endif /* __CONFIG_H */
|
|
|