upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
199 lines
5.1 KiB
199 lines
5.1 KiB
/*
|
|
* (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Configuration settings for the Freescale S32V234 EVB board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_S32V234
|
|
#define CONFIG_DM
|
|
|
|
/* Config GIC */
|
|
#define CONFIG_GICV2
|
|
#define GICD_BASE 0x7D001000
|
|
#define GICC_BASE 0x7D002000
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
#undef CONFIG_RUN_FROM_IRAM_ONLY
|
|
|
|
#define CONFIG_RUN_FROM_DDR1
|
|
#undef CONFIG_RUN_FROM_DDR0
|
|
|
|
/* Run by default from DDR1 */
|
|
#ifdef CONFIG_RUN_FROM_DDR0
|
|
#define DDR_BASE_ADDR 0x80000000
|
|
#else
|
|
#define DDR_BASE_ADDR 0xC0000000
|
|
#endif
|
|
|
|
#define CONFIG_MACH_TYPE 4146
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* Config CACHE */
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
#define CONFIG_SYS_FULL_VA
|
|
|
|
/* Enable passing of ATAGs */
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
/* SMP Spin Table Definitions */
|
|
#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
|
|
|
|
/* Generic Timer Definitions */
|
|
#define COUNTER_FREQUENCY (1000000000) /* 1000MHz */
|
|
#define CONFIG_SYS_FSL_ERRATUM_A008585
|
|
|
|
/* Size of malloc() pool */
|
|
#ifdef CONFIG_RUN_FROM_IRAM_ONLY
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024)
|
|
#else
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
|
#endif
|
|
|
|
#define CONFIG_DM_SERIAL
|
|
#define CONFIG_FSL_LINFLEXUART
|
|
#define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR
|
|
|
|
#define CONFIG_DEBUG_UART_LINFLEXUART
|
|
#define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_SYS_UART_PORT (1)
|
|
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_FSL_USDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
#define CONFIG_CMD_MMC
|
|
/* #define CONFIG_CMD_EXT2 EXT2 Support */
|
|
|
|
#if 0
|
|
|
|
/* Ethernet config */
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_MII
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#endif
|
|
|
|
#if 0 /* Disable until the FLASH will be implemented */
|
|
#define CONFIG_SYS_USE_NAND
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USE_NAND
|
|
/* Nand Flash Configs */
|
|
#define CONFIG_JFFS2_NAND
|
|
#define MTD_NAND_FSL_NFC_SWECC 1
|
|
#define CONFIG_NAND_FSL_NFC
|
|
#define CONFIG_SYS_NAND_BASE 0x400E0000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE
|
|
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
|
|
#endif
|
|
|
|
#define CONFIG_LOADADDR 0xC307FFC0
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"boot_scripts=boot.scr.uimg boot.scr\0" \
|
|
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"console=ttyLF0,115200\0" \
|
|
"fdt_file=s32v234-evb.dtb\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_addr_r=0xC2000000\0" \
|
|
"kernel_addr_r=0xC307FFC0\0" \
|
|
"ramdisk_addr_r=0xC4000000\0" \
|
|
"ramdisk=rootfs.uimg\0"\
|
|
"ip_dyn=yes\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"update_sd_firmware_filename=u-boot.imx\0" \
|
|
"update_sd_firmware=" \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"if mmc dev ${mmcdev}; then " \
|
|
"if ${get_cmd} ${update_sd_firmware_filename}; then " \
|
|
"setexpr fw_sz ${filesize} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
|
|
"fi; " \
|
|
"fi\0" \
|
|
"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
|
|
"jtagboot=echo Booting using jtag...; " \
|
|
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
|
"jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
|
|
"run loaduimage; run loadramdisk; run loadfdt;"\
|
|
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
|
"boot_net_usb_start=true\0" \
|
|
BOOTENV
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run distro_bootcmd"
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
|
|
#define CONFIG_CMD_MEMTEST
|
|
#define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR)
|
|
#define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#ifdef CONFIG_RUN_FROM_IRAM_ONLY
|
|
#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR)
|
|
#endif
|
|
|
|
#if 0
|
|
/* Configure PXE */
|
|
#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
|
|
#endif
|
|
|
|
/* Physical memory map */
|
|
/* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM (DDR_BASE_ADDR)
|
|
#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* environment organization */
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
|
|
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#endif
|
|
|