upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
191 lines
5.8 KiB
191 lines
5.8 KiB
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* Copyright (C) 2007 Logic Product Development, Inc.
|
|
* Peter Barada <peterb@logicpd.com>
|
|
*
|
|
* Copyright (C) 2007 MontaVista Software, Inc.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* (C) Copyright 2010
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
|
|
/* This needs to be set prior to including km/km83xx-common.h */
|
|
|
|
#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
|
|
#define CONFIG_HOSTNAME suvd3
|
|
#define CONFIG_KM_BOARD_NAME "suvd3"
|
|
/* include common defines/options for all 8321 Keymile boards */
|
|
#include "km/km8321-common.h"
|
|
|
|
#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
|
|
#define CONFIG_HOSTNAME kmvect1
|
|
#define CONFIG_KM_BOARD_NAME "kmvect1"
|
|
/* at end of uboot partition, before env */
|
|
#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
|
|
/* include common defines/options for all 8309 Keymile boards */
|
|
#include "km/km8309-common.h"
|
|
|
|
#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
|
|
#define CONFIG_HOSTNAME kmtegr1
|
|
#define CONFIG_KM_BOARD_NAME "kmtegr1"
|
|
#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
|
|
#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
|
|
|
|
#define CONFIG_ENV_ADDR 0xF0100000
|
|
#define CONFIG_ENV_OFFSET 0x100000
|
|
|
|
#define CONFIG_NAND_ECC_BCH
|
|
#define CONFIG_NAND_KMETER1
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define NAND_MAX_CHIPS 1
|
|
|
|
/* include common defines/options for all 8309 Keymile boards */
|
|
#include "km/km8309-common.h"
|
|
/* must be after the include because KMBEC_FPGA is otherwise undefined */
|
|
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
|
|
|
|
#else
|
|
#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_APP1_BASE 0xA0000000
|
|
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
|
|
#define CONFIG_SYS_APP2_BASE 0xB0000000
|
|
#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
|
|
|
|
/* EEprom support */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
|
|
/*
|
|
* Init Local Bus Memory Controller:
|
|
*
|
|
* Bank Bus Machine PortSz Size Device
|
|
* ---- --- ------- ------ ----- ------
|
|
* 2 Local UPMA 16 bit 256MB APP1
|
|
* 3 Local GPCM 16 bit 256MB APP2
|
|
*
|
|
*/
|
|
|
|
#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
|
|
/*
|
|
* APP1 on the local bus CS2
|
|
*/
|
|
#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
|
|
#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
|
|
|
|
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
|
|
BR_PS_16 | \
|
|
BR_MS_UPMA | \
|
|
BR_V)
|
|
#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
|
|
|
|
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
|
|
BR_PS_16 | \
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
|
|
OR_GPCM_CSNT | \
|
|
OR_GPCM_ACS_DIV4 | \
|
|
OR_GPCM_SCY_3 | \
|
|
OR_GPCM_TRLX_SET)
|
|
|
|
#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
|
|
0x0000c000 | \
|
|
MxMR_WLFx_2X)
|
|
|
|
#elif defined(CONFIG_KMTEGR1)
|
|
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
|
|
BR_PS_16 | \
|
|
BR_MS_GPCM | \
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
|
|
OR_GPCM_SCY_5 | \
|
|
OR_GPCM_TRLX_CLEAR | \
|
|
OR_GPCM_EHTR_CLEAR)
|
|
|
|
#endif /* CONFIG_KMTEGR1 */
|
|
|
|
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
|
|
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
|
|
|
|
/*
|
|
* MMU Setup
|
|
*/
|
|
#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
|
|
/* APP1: icache cacheable, but dcache-inhibit and guarded */
|
|
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
|
|
BATL_MEMCOHERENCE)
|
|
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
|
|
BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
|
|
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
|
|
|
#elif defined(CONFIG_KMTEGR1)
|
|
#define CONFIG_SYS_IBAT5L (0)
|
|
#define CONFIG_SYS_IBAT5U (0)
|
|
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
|
#endif /* CONFIG_KMTEGR1 */
|
|
|
|
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
|
|
BATL_MEMCOHERENCE)
|
|
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
|
|
BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
|
|
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
|
|
|
/*
|
|
* QE UEC ethernet configuration
|
|
*/
|
|
#if defined(CONFIG_KMVECT1)
|
|
#define CONFIG_MV88E6352_SWITCH
|
|
#define CONFIG_KM_MVEXTSW_ADDR 0x10
|
|
|
|
/* ethernet port connected to simple switch 88e6122 (UEC0) */
|
|
#define CONFIG_UEC_ETH1
|
|
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
|
|
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
|
|
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
|
|
|
|
#define CONFIG_FIXED_PHY 0xFFFFFFFF
|
|
#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
|
|
#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
|
|
{devnum, speed, duplex}
|
|
#define CONFIG_SYS_FIXED_PHY_PORTS \
|
|
CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
|
|
|
|
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
|
|
#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
|
|
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
|
|
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
|
|
#endif /* CONFIG_KMVECT1 */
|
|
|
|
#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
|
|
/* ethernet port connected to piggy (UEC2) */
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_UEC_ETH2
|
|
#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
|
|
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
|
|
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
|
|
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
|
|
#define CONFIG_SYS_UEC2_PHY_ADDR 0
|
|
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
|
|
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
|
|
#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
|
|
|
|
#endif /* __CONFIG_H */
|
|
|