upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1177 lines
32 KiB
1177 lines
32 KiB
/*
|
|
* (C) Copyright 2000-2008
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define ONE_BILLION 1000000000
|
|
#ifdef DEBUG
|
|
#define DEBUGF(fmt,args...) printf(fmt ,##args)
|
|
#else
|
|
#define DEBUGF(fmt,args...)
|
|
#endif
|
|
|
|
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
|
|
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
|
|
|
|
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
|
|
{
|
|
unsigned long pllmr;
|
|
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
|
|
uint pvr = get_pvr();
|
|
unsigned long psr;
|
|
unsigned long m;
|
|
|
|
/*
|
|
* Read PLL Mode register
|
|
*/
|
|
pllmr = mfdcr (CPC0_PLLMR);
|
|
|
|
/*
|
|
* Read Pin Strapping register
|
|
*/
|
|
psr = mfdcr (CPC0_PSR);
|
|
|
|
/*
|
|
* Determine FWD_DIV.
|
|
*/
|
|
sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
|
|
|
|
/*
|
|
* Determine FBK_DIV.
|
|
*/
|
|
sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
|
|
if (sysInfo->pllFbkDiv == 0) {
|
|
sysInfo->pllFbkDiv = 16;
|
|
}
|
|
|
|
/*
|
|
* Determine PLB_DIV.
|
|
*/
|
|
sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
|
|
|
|
/*
|
|
* Determine PCI_DIV.
|
|
*/
|
|
sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
|
|
|
|
/*
|
|
* Determine EXTBUS_DIV.
|
|
*/
|
|
sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
|
|
|
|
/*
|
|
* Determine OPB_DIV.
|
|
*/
|
|
sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
|
|
|
|
/*
|
|
* Check if PPC405GPr used (mask minor revision field)
|
|
*/
|
|
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
|
|
/*
|
|
* Determine FWD_DIV B (only PPC405GPr with new mode strapping).
|
|
*/
|
|
sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
|
|
|
|
/*
|
|
* Determine factor m depending on PLL feedback clock source
|
|
*/
|
|
if (!(psr & PSR_PCI_ASYNC_EN)) {
|
|
if (psr & PSR_NEW_MODE_EN) {
|
|
/*
|
|
* sync pci clock used as feedback (new mode)
|
|
*/
|
|
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
|
|
} else {
|
|
/*
|
|
* sync pci clock used as feedback (legacy mode)
|
|
*/
|
|
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
|
|
}
|
|
} else if (psr & PSR_NEW_MODE_EN) {
|
|
if (psr & PSR_PERCLK_SYNC_MODE_EN) {
|
|
/*
|
|
* PerClk used as feedback (new mode)
|
|
*/
|
|
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
|
|
} else {
|
|
/*
|
|
* CPU clock used as feedback (new mode)
|
|
*/
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
|
|
}
|
|
} else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
|
|
/*
|
|
* PerClk used as feedback (legacy mode)
|
|
*/
|
|
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
|
|
} else {
|
|
/*
|
|
* PLB clock used as feedback (legacy mode)
|
|
*/
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
|
|
}
|
|
|
|
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
|
|
(unsigned long long)sysClkPeriodPs;
|
|
sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
|
|
sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
|
|
} else {
|
|
/*
|
|
* Check pllFwdDiv to see if running in bypass mode where the CPU speed
|
|
* is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
|
|
* to make sure it is within the proper range.
|
|
* spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
|
|
* Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
|
|
*/
|
|
if (sysInfo->pllFwdDiv == 1) {
|
|
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
|
|
sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
|
|
} else {
|
|
sysInfo->freqVCOHz = ( 1000000000000LL *
|
|
(unsigned long long)sysInfo->pllFwdDiv *
|
|
(unsigned long long)sysInfo->pllFbkDiv *
|
|
(unsigned long long)sysInfo->pllPlbDiv
|
|
) / (unsigned long long)sysClkPeriodPs;
|
|
sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
|
|
sysInfo->pllFbkDiv)) * 10000;
|
|
sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
|
|
}
|
|
}
|
|
|
|
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
|
|
sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
|
|
sysInfo->freqUART = sysInfo->freqProcessor;
|
|
}
|
|
|
|
|
|
/********************************************
|
|
* get_PCI_freq
|
|
* return PCI bus freq in Hz
|
|
*********************************************/
|
|
ulong get_PCI_freq (void)
|
|
{
|
|
ulong val;
|
|
PPC4xx_SYS_INFO sys_info;
|
|
|
|
get_sys_info (&sys_info);
|
|
val = sys_info.freqPLB / sys_info.pllPciDiv;
|
|
return val;
|
|
}
|
|
|
|
|
|
#elif defined(CONFIG_440)
|
|
|
|
#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
|
|
defined(CONFIG_460SX)
|
|
static u8 pll_fwdv_multi_bits[] = {
|
|
/* values for: 1 - 16 */
|
|
0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
|
|
0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
|
|
};
|
|
|
|
u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
|
|
{
|
|
u32 index;
|
|
|
|
for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
|
|
if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
|
|
return index + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 pll_fbdv_multi_bits[] = {
|
|
/* values for: 1 - 100 */
|
|
0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
|
|
0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
|
|
0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
|
|
0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
|
|
0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
|
|
0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
|
|
0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
|
|
0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
|
|
0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
|
|
0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
|
|
/* values for: 101 - 200 */
|
|
0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
|
|
0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
|
|
0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
|
|
0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
|
|
0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
|
|
0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
|
|
0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
|
|
0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
|
|
0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
|
|
0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
|
|
/* values for: 201 - 255 */
|
|
0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
|
|
0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
|
|
0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
|
|
0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
|
|
0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
|
|
0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
|
|
};
|
|
|
|
u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
|
|
{
|
|
u32 index;
|
|
|
|
for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
|
|
if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
|
|
return index + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* AMCC_TODO: verify this routine against latest EAS, cause stuff changed
|
|
* with latest EAS
|
|
*/
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
unsigned long strp0;
|
|
unsigned long strp1;
|
|
unsigned long temp;
|
|
unsigned long m;
|
|
unsigned long plbedv0;
|
|
|
|
/* Extract configured divisors */
|
|
mfsdr(SDR0_SDSTP0, strp0);
|
|
mfsdr(SDR0_SDSTP1, strp1);
|
|
|
|
temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
|
|
sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
|
|
|
|
temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
|
|
sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
|
|
|
|
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
|
|
sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
|
|
|
|
temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
|
|
sysInfo->pllOpbDiv = temp ? temp : 4;
|
|
|
|
/* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
|
|
temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
|
|
sysInfo->pllExtBusDiv = temp ? temp : 4;
|
|
|
|
temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
|
|
plbedv0 = temp ? temp: 8;
|
|
|
|
/* Calculate 'M' based on feedback source */
|
|
temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
|
|
if (temp == 0) {
|
|
/* PLL internal feedback */
|
|
m = sysInfo->pllFbkDiv;
|
|
} else {
|
|
/* PLL PerClk feedback */
|
|
m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
|
|
sysInfo->pllExtBusDiv;
|
|
}
|
|
|
|
/* Now calculate the individual clocks */
|
|
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
|
|
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
|
|
sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
|
|
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
|
|
sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
|
|
sysInfo->freqDDR = sysInfo->freqPLB;
|
|
sysInfo->freqUART = sysInfo->freqPLB;
|
|
|
|
return;
|
|
}
|
|
|
|
#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
void get_sys_info (sys_info_t *sysInfo)
|
|
{
|
|
unsigned long temp;
|
|
unsigned long reg;
|
|
unsigned long lfdiv;
|
|
unsigned long m;
|
|
unsigned long prbdv0;
|
|
/*
|
|
WARNING: ASSUMES the following:
|
|
ENG=1
|
|
PRADV0=1
|
|
PRBDV0=1
|
|
*/
|
|
|
|
/* Decode CPR0_PLLD0 for divisors */
|
|
mfcpr(CPR0_PLLD, reg);
|
|
temp = (reg & PLLD_FWDVA_MASK) >> 16;
|
|
sysInfo->pllFwdDivA = temp ? temp : 16;
|
|
temp = (reg & PLLD_FWDVB_MASK) >> 8;
|
|
sysInfo->pllFwdDivB = temp ? temp: 8 ;
|
|
temp = (reg & PLLD_FBDV_MASK) >> 24;
|
|
sysInfo->pllFbkDiv = temp ? temp : 32;
|
|
lfdiv = reg & PLLD_LFBDV_MASK;
|
|
|
|
mfcpr(CPR0_OPBD, reg);
|
|
temp = (reg & OPBDDV_MASK) >> 24;
|
|
sysInfo->pllOpbDiv = temp ? temp : 4;
|
|
|
|
mfcpr(CPR0_PERD, reg);
|
|
temp = (reg & PERDV_MASK) >> 24;
|
|
sysInfo->pllExtBusDiv = temp ? temp : 8;
|
|
|
|
mfcpr(CPR0_PRIMBD, reg);
|
|
temp = (reg & PRBDV_MASK) >> 24;
|
|
prbdv0 = temp ? temp : 8;
|
|
|
|
mfcpr(CPR0_SPCID, reg);
|
|
temp = (reg & SPCID_MASK) >> 24;
|
|
sysInfo->pllPciDiv = temp ? temp : 4;
|
|
|
|
/* Calculate 'M' based on feedback source */
|
|
mfsdr(SDR0_SDSTP0, reg);
|
|
temp = (reg & PLLSYS0_SEL_MASK) >> 27;
|
|
if (temp == 0) { /* PLL output */
|
|
/* Figure which pll to use */
|
|
mfcpr(CPR0_PLLC, reg);
|
|
temp = (reg & PLLC_SRC_MASK) >> 29;
|
|
if (!temp) /* PLLOUTA */
|
|
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
|
|
else /* PLLOUTB */
|
|
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
|
|
}
|
|
else if (temp == 1) /* CPU output */
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
|
|
else /* PerClk */
|
|
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
|
|
|
|
/* Now calculate the individual clocks */
|
|
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
|
|
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
|
|
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
|
|
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
|
|
sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
|
|
sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
|
|
sysInfo->freqUART = sysInfo->freqPLB;
|
|
|
|
/* Figure which timer source to use */
|
|
if (mfspr(SPRN_CCR1) & 0x0080) {
|
|
/* External Clock, assume same as SYS_CLK */
|
|
temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
|
|
if (CONFIG_SYS_CLK_FREQ > temp)
|
|
sysInfo->freqTmrClk = temp;
|
|
else
|
|
sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
|
|
}
|
|
else /* Internal clock */
|
|
sysInfo->freqTmrClk = sysInfo->freqProcessor;
|
|
}
|
|
|
|
/********************************************
|
|
* get_PCI_freq
|
|
* return PCI bus freq in Hz
|
|
*********************************************/
|
|
ulong get_PCI_freq (void)
|
|
{
|
|
sys_info_t sys_info;
|
|
get_sys_info (&sys_info);
|
|
return sys_info.freqPCI;
|
|
}
|
|
|
|
#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
|
|
&& !defined(CONFIG_XILINX_440)
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
unsigned long strp0;
|
|
unsigned long temp;
|
|
unsigned long m;
|
|
|
|
/* Extract configured divisors */
|
|
strp0 = mfdcr( CPC0_STRP0 );
|
|
sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
|
|
sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
|
|
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
|
|
sysInfo->pllFbkDiv = temp ? temp : 16;
|
|
sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
|
|
sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
|
|
|
|
/* Calculate 'M' based on feedback source */
|
|
if( strp0 & PLLSYS0_EXTSL_MASK )
|
|
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
|
|
else
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
|
|
|
|
/* Now calculate the individual clocks */
|
|
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
|
|
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
|
|
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
|
|
if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
|
|
sysInfo->freqPLB >>= 1;
|
|
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
|
|
sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
|
|
sysInfo->freqUART = sysInfo->freqPLB;
|
|
}
|
|
#else
|
|
|
|
#if !defined(CONFIG_XILINX_440)
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
unsigned long strp0;
|
|
unsigned long strp1;
|
|
unsigned long temp;
|
|
unsigned long temp1;
|
|
unsigned long lfdiv;
|
|
unsigned long m;
|
|
unsigned long prbdv0;
|
|
|
|
#if defined(CONFIG_YUCCA)
|
|
unsigned long sys_freq;
|
|
unsigned long sys_per=0;
|
|
unsigned long msr;
|
|
unsigned long pci_clock_per;
|
|
unsigned long sdr_ddrpll;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Get the system clock period.
|
|
+-------------------------------------------------------------------------*/
|
|
sys_per = determine_sysper();
|
|
|
|
msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Calculate the system clock speed from the period.
|
|
+-------------------------------------------------------------------------*/
|
|
sys_freq = (ONE_BILLION / sys_per) * 1000;
|
|
#endif
|
|
|
|
/* Extract configured divisors */
|
|
mfsdr( SDR0_SDSTP0,strp0 );
|
|
mfsdr( SDR0_SDSTP1,strp1 );
|
|
|
|
temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
|
|
sysInfo->pllFwdDivA = temp ? temp : 16 ;
|
|
temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
|
|
sysInfo->pllFwdDivB = temp ? temp: 8 ;
|
|
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
|
|
sysInfo->pllFbkDiv = temp ? temp : 32;
|
|
temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
|
|
sysInfo->pllOpbDiv = temp ? temp : 4;
|
|
temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
|
|
sysInfo->pllExtBusDiv = temp ? temp : 4;
|
|
prbdv0 = (strp0 >> 2) & 0x7;
|
|
|
|
/* Calculate 'M' based on feedback source */
|
|
temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
|
|
temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
|
|
lfdiv = temp1 ? temp1 : 64;
|
|
if (temp == 0) { /* PLL output */
|
|
/* Figure which pll to use */
|
|
temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
|
|
if (!temp)
|
|
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
|
|
else
|
|
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
|
|
}
|
|
else if (temp == 1) /* CPU output */
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
|
|
else /* PerClk */
|
|
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
|
|
|
|
/* Now calculate the individual clocks */
|
|
#if defined(CONFIG_YUCCA)
|
|
sysInfo->freqVCOMhz = (m * sys_freq) ;
|
|
#else
|
|
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
|
|
#endif
|
|
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
|
|
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
|
|
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
|
|
sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
|
|
|
|
#if defined(CONFIG_YUCCA)
|
|
/* Determine PCI Clock Period */
|
|
pci_clock_per = determine_pci_clock_per();
|
|
sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
|
|
mfsdr(SDR0_DDR0, sdr_ddrpll);
|
|
sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
|
|
#endif
|
|
|
|
sysInfo->freqUART = sysInfo->freqPLB;
|
|
}
|
|
|
|
#endif
|
|
#endif /* CONFIG_XILINX_440 */
|
|
|
|
#if defined(CONFIG_YUCCA)
|
|
unsigned long determine_sysper(void)
|
|
{
|
|
unsigned int fpga_clocking_reg;
|
|
unsigned int master_clock_selection;
|
|
unsigned long master_clock_per = 0;
|
|
unsigned long fb_div_selection;
|
|
unsigned int vco_div_reg_value;
|
|
unsigned long vco_div_selection;
|
|
unsigned long sys_per = 0;
|
|
int extClkVal;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Read FPGA reg 0 and reg 1 to get FPGA reg information
|
|
+-------------------------------------------------------------------------*/
|
|
fpga_clocking_reg = in16(FPGA_REG16);
|
|
|
|
|
|
/* Determine Master Clock Source Selection */
|
|
master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
|
|
|
|
switch(master_clock_selection) {
|
|
case FPGA_REG16_MASTER_CLK_66_66:
|
|
master_clock_per = PERIOD_66_66MHZ;
|
|
break;
|
|
case FPGA_REG16_MASTER_CLK_50:
|
|
master_clock_per = PERIOD_50_00MHZ;
|
|
break;
|
|
case FPGA_REG16_MASTER_CLK_33_33:
|
|
master_clock_per = PERIOD_33_33MHZ;
|
|
break;
|
|
case FPGA_REG16_MASTER_CLK_25:
|
|
master_clock_per = PERIOD_25_00MHZ;
|
|
break;
|
|
case FPGA_REG16_MASTER_CLK_EXT:
|
|
if ((extClkVal==EXTCLK_33_33)
|
|
&& (extClkVal==EXTCLK_50)
|
|
&& (extClkVal==EXTCLK_66_66)
|
|
&& (extClkVal==EXTCLK_83)) {
|
|
/* calculate master clock period from external clock value */
|
|
master_clock_per=(ONE_BILLION/extClkVal) * 1000;
|
|
} else {
|
|
/* Unsupported */
|
|
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
|
|
hang();
|
|
}
|
|
break;
|
|
default:
|
|
/* Unsupported */
|
|
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
|
|
hang();
|
|
break;
|
|
}
|
|
|
|
/* Determine FB divisors values */
|
|
if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
|
|
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
|
|
fb_div_selection = FPGA_FB_DIV_6;
|
|
else
|
|
fb_div_selection = FPGA_FB_DIV_12;
|
|
} else {
|
|
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
|
|
fb_div_selection = FPGA_FB_DIV_10;
|
|
else
|
|
fb_div_selection = FPGA_FB_DIV_20;
|
|
}
|
|
|
|
/* Determine VCO divisors values */
|
|
vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
|
|
|
|
switch(vco_div_reg_value) {
|
|
case FPGA_REG16_VCO_DIV_4:
|
|
vco_div_selection = FPGA_VCO_DIV_4;
|
|
break;
|
|
case FPGA_REG16_VCO_DIV_6:
|
|
vco_div_selection = FPGA_VCO_DIV_6;
|
|
break;
|
|
case FPGA_REG16_VCO_DIV_8:
|
|
vco_div_selection = FPGA_VCO_DIV_8;
|
|
break;
|
|
case FPGA_REG16_VCO_DIV_10:
|
|
default:
|
|
vco_div_selection = FPGA_VCO_DIV_10;
|
|
break;
|
|
}
|
|
|
|
if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
|
|
switch(master_clock_per) {
|
|
case PERIOD_25_00MHZ:
|
|
if (fb_div_selection == FPGA_FB_DIV_12) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_75_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
}
|
|
break;
|
|
case PERIOD_33_33MHZ:
|
|
if (fb_div_selection == FPGA_FB_DIV_6) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_33_33MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_10) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_83_33MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_10)
|
|
sys_per = PERIOD_33_33MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_12) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_100_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_66_66MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_8)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
}
|
|
break;
|
|
case PERIOD_50_00MHZ:
|
|
if (fb_div_selection == FPGA_FB_DIV_6) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_75_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_10) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_83_33MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_10)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_12) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_100_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_8)
|
|
sys_per = PERIOD_75_00MHZ;
|
|
}
|
|
break;
|
|
case PERIOD_66_66MHZ:
|
|
if (fb_div_selection == FPGA_FB_DIV_6) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_4)
|
|
sys_per = PERIOD_100_00MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_6)
|
|
sys_per = PERIOD_66_66MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_8)
|
|
sys_per = PERIOD_50_00MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_10) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_8)
|
|
sys_per = PERIOD_83_33MHZ;
|
|
if (vco_div_selection == FPGA_VCO_DIV_10)
|
|
sys_per = PERIOD_66_66MHZ;
|
|
}
|
|
if (fb_div_selection == FPGA_FB_DIV_12) {
|
|
if (vco_div_selection == FPGA_VCO_DIV_8)
|
|
sys_per = PERIOD_100_00MHZ;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (sys_per == 0) {
|
|
/* Other combinations are not supported */
|
|
DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
|
|
hang();
|
|
}
|
|
} else {
|
|
/* calcul system clock without cheking */
|
|
/* if engineering option clock no check is selected */
|
|
/* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
|
|
sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
|
|
}
|
|
|
|
return(sys_per);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| determine_pci_clock_per.
|
|
+-------------------------------------------------------------------------*/
|
|
unsigned long determine_pci_clock_per(void)
|
|
{
|
|
unsigned long pci_clock_selection, pci_period;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Read FPGA reg 6 to get PCI 0 FPGA reg information
|
|
+-------------------------------------------------------------------------*/
|
|
pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
|
|
|
|
|
|
pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
|
|
|
|
switch (pci_clock_selection) {
|
|
case FPGA_REG16_PCI0_CLK_133_33:
|
|
pci_period = PERIOD_133_33MHZ;
|
|
break;
|
|
case FPGA_REG16_PCI0_CLK_100:
|
|
pci_period = PERIOD_100_00MHZ;
|
|
break;
|
|
case FPGA_REG16_PCI0_CLK_66_66:
|
|
pci_period = PERIOD_66_66MHZ;
|
|
break;
|
|
default:
|
|
pci_period = PERIOD_33_33MHZ;;
|
|
break;
|
|
}
|
|
|
|
return(pci_period);
|
|
}
|
|
#endif
|
|
|
|
#elif defined(CONFIG_XILINX_405)
|
|
extern void get_sys_info (sys_info_t * sysInfo);
|
|
extern ulong get_PCI_freq (void);
|
|
|
|
#elif defined(CONFIG_AP1000)
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
sysInfo->freqProcessor = 240 * 1000 * 1000;
|
|
sysInfo->freqPLB = 80 * 1000 * 1000;
|
|
sysInfo->freqPCI = 33 * 1000 * 1000;
|
|
}
|
|
|
|
#elif defined(CONFIG_405)
|
|
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
sysInfo->freqVCOMhz=3125000;
|
|
sysInfo->freqProcessor=12*1000*1000;
|
|
sysInfo->freqPLB=50*1000*1000;
|
|
sysInfo->freqPCI=66*1000*1000;
|
|
}
|
|
|
|
#elif defined(CONFIG_405EP)
|
|
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
|
|
{
|
|
unsigned long pllmr0;
|
|
unsigned long pllmr1;
|
|
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
|
|
unsigned long m;
|
|
unsigned long pllmr0_ccdv;
|
|
|
|
/*
|
|
* Read PLL Mode registers
|
|
*/
|
|
pllmr0 = mfdcr (CPC0_PLLMR0);
|
|
pllmr1 = mfdcr (CPC0_PLLMR1);
|
|
|
|
/*
|
|
* Determine forward divider A
|
|
*/
|
|
sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
|
|
|
|
/*
|
|
* Determine forward divider B (should be equal to A)
|
|
*/
|
|
sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
|
|
|
|
/*
|
|
* Determine FBK_DIV.
|
|
*/
|
|
sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
|
|
if (sysInfo->pllFbkDiv == 0)
|
|
sysInfo->pllFbkDiv = 16;
|
|
|
|
/*
|
|
* Determine PLB_DIV.
|
|
*/
|
|
sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
|
|
|
|
/*
|
|
* Determine PCI_DIV.
|
|
*/
|
|
sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
|
|
|
|
/*
|
|
* Determine EXTBUS_DIV.
|
|
*/
|
|
sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
|
|
|
|
/*
|
|
* Determine OPB_DIV.
|
|
*/
|
|
sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
|
|
|
|
/*
|
|
* Determine the M factor
|
|
*/
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
|
|
|
|
/*
|
|
* Determine VCO clock frequency
|
|
*/
|
|
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
|
|
(unsigned long long)sysClkPeriodPs;
|
|
|
|
/*
|
|
* Determine CPU clock frequency
|
|
*/
|
|
pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
|
|
if (pllmr1 & PLLMR1_SSCS_MASK) {
|
|
/*
|
|
* This is true if FWDVA == FWDVB:
|
|
* sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
|
|
* / pllmr0_ccdv;
|
|
*/
|
|
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
|
|
/ sysInfo->pllFwdDiv / pllmr0_ccdv;
|
|
} else {
|
|
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
|
|
}
|
|
|
|
/*
|
|
* Determine PLB clock frequency
|
|
*/
|
|
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
|
|
|
|
sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
|
|
|
|
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
|
|
|
|
sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
|
|
}
|
|
|
|
|
|
/********************************************
|
|
* get_PCI_freq
|
|
* return PCI bus freq in Hz
|
|
*********************************************/
|
|
ulong get_PCI_freq (void)
|
|
{
|
|
ulong val;
|
|
PPC4xx_SYS_INFO sys_info;
|
|
|
|
get_sys_info (&sys_info);
|
|
val = sys_info.freqPLB / sys_info.pllPciDiv;
|
|
return val;
|
|
}
|
|
|
|
#elif defined(CONFIG_405EZ)
|
|
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
|
|
{
|
|
unsigned long cpr_plld;
|
|
unsigned long cpr_pllc;
|
|
unsigned long cpr_primad;
|
|
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
|
|
unsigned long primad_cpudv;
|
|
unsigned long m;
|
|
unsigned long plloutb;
|
|
|
|
/*
|
|
* Read PLL Mode registers
|
|
*/
|
|
mfcpr(CPR0_PLLD, cpr_plld);
|
|
mfcpr(CPR0_PLLC, cpr_pllc);
|
|
|
|
/*
|
|
* Determine forward divider A
|
|
*/
|
|
sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
|
|
|
|
/*
|
|
* Determine forward divider B
|
|
*/
|
|
sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
|
|
if (sysInfo->pllFwdDivB == 0)
|
|
sysInfo->pllFwdDivB = 8;
|
|
|
|
/*
|
|
* Determine FBK_DIV.
|
|
*/
|
|
sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
|
|
if (sysInfo->pllFbkDiv == 0)
|
|
sysInfo->pllFbkDiv = 256;
|
|
|
|
/*
|
|
* Read CPR_PRIMAD register
|
|
*/
|
|
mfcpr(CPC0_PRIMAD, cpr_primad);
|
|
|
|
/*
|
|
* Determine PLB_DIV.
|
|
*/
|
|
sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
|
|
if (sysInfo->pllPlbDiv == 0)
|
|
sysInfo->pllPlbDiv = 16;
|
|
|
|
/*
|
|
* Determine EXTBUS_DIV.
|
|
*/
|
|
sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
|
|
if (sysInfo->pllExtBusDiv == 0)
|
|
sysInfo->pllExtBusDiv = 16;
|
|
|
|
/*
|
|
* Determine OPB_DIV.
|
|
*/
|
|
sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
|
|
if (sysInfo->pllOpbDiv == 0)
|
|
sysInfo->pllOpbDiv = 16;
|
|
|
|
/*
|
|
* Determine the M factor
|
|
*/
|
|
if (cpr_pllc & PLLC_SRC_MASK)
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
|
|
else
|
|
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
|
|
|
|
/*
|
|
* Determine VCO clock frequency
|
|
*/
|
|
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
|
|
(unsigned long long)sysClkPeriodPs;
|
|
|
|
/*
|
|
* Determine CPU clock frequency
|
|
*/
|
|
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
|
|
if (primad_cpudv == 0)
|
|
primad_cpudv = 16;
|
|
|
|
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
|
|
sysInfo->pllFwdDiv / primad_cpudv;
|
|
|
|
/*
|
|
* Determine PLB clock frequency
|
|
*/
|
|
sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
|
|
sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
|
|
|
|
sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
|
|
sysInfo->pllOpbDiv;
|
|
|
|
sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
|
|
sysInfo->pllExtBusDiv;
|
|
|
|
plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
|
|
sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
|
|
sysInfo->pllFwdDivB);
|
|
sysInfo->freqUART = plloutb;
|
|
}
|
|
|
|
#elif defined(CONFIG_405EX)
|
|
|
|
/*
|
|
* TODO: We need to get the CPR registers and calculate these values correctly!!!!
|
|
* We need the specs!!!!
|
|
*/
|
|
static unsigned char get_fbdv(unsigned char index)
|
|
{
|
|
unsigned char ret = 0;
|
|
/* This is table should be 256 bytes.
|
|
* Only take first 52 values.
|
|
*/
|
|
unsigned char fbdv_tb[] = {
|
|
0x00, 0xff, 0x7f, 0xfd,
|
|
0x7a, 0xf5, 0x6a, 0xd5,
|
|
0x2a, 0xd4, 0x29, 0xd3,
|
|
0x26, 0xcc, 0x19, 0xb3,
|
|
0x67, 0xce, 0x1d, 0xbb,
|
|
0x77, 0xee, 0x5d, 0xba,
|
|
0x74, 0xe9, 0x52, 0xa5,
|
|
0x4b, 0x96, 0x2c, 0xd8,
|
|
0x31, 0xe3, 0x46, 0x8d,
|
|
0x1b, 0xb7, 0x6f, 0xde,
|
|
0x3d, 0xfb, 0x76, 0xed,
|
|
0x5a, 0xb5, 0x6b, 0xd6,
|
|
0x2d, 0xdb, 0x36, 0xec,
|
|
|
|
};
|
|
|
|
if ((index & 0x7f) == 0)
|
|
return 1;
|
|
while (ret < sizeof (fbdv_tb)) {
|
|
if (fbdv_tb[ret] == index)
|
|
break;
|
|
ret++;
|
|
}
|
|
ret++;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define PLL_FBK_PLL_LOCAL 0
|
|
#define PLL_FBK_CPU 1
|
|
#define PLL_FBK_PERCLK 5
|
|
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
|
|
unsigned long m = 1;
|
|
unsigned int tmp;
|
|
unsigned char fwdva[16] = {
|
|
1, 2, 14, 9, 4, 11, 16, 13,
|
|
12, 5, 6, 15, 10, 7, 8, 3,
|
|
};
|
|
unsigned char sel, cpudv0, plb2xDiv;
|
|
|
|
mfcpr(CPR0_PLLD, tmp);
|
|
|
|
/*
|
|
* Determine forward divider A
|
|
*/
|
|
sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
|
|
|
|
/*
|
|
* Determine FBK_DIV.
|
|
*/
|
|
sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
|
|
|
|
/*
|
|
* Determine PLBDV0
|
|
*/
|
|
sysInfo->pllPlbDiv = 2;
|
|
|
|
/*
|
|
* Determine PERDV0
|
|
*/
|
|
mfcpr(CPR0_PERD, tmp);
|
|
tmp = (tmp >> 24) & 0x03;
|
|
sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
|
|
|
|
/*
|
|
* Determine OPBDV0
|
|
*/
|
|
mfcpr(CPR0_OPBD, tmp);
|
|
tmp = (tmp >> 24) & 0x03;
|
|
sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
|
|
|
|
/* Determine PLB2XDV0 */
|
|
mfcpr(CPR0_PLBD, tmp);
|
|
tmp = (tmp >> 16) & 0x07;
|
|
plb2xDiv = (tmp == 0) ? 8 : tmp;
|
|
|
|
/* Determine CPUDV0 */
|
|
mfcpr(CPR0_CPUD, tmp);
|
|
tmp = (tmp >> 24) & 0x07;
|
|
cpudv0 = (tmp == 0) ? 8 : tmp;
|
|
|
|
/* Determine SEL(5:7) in CPR0_PLLC */
|
|
mfcpr(CPR0_PLLC, tmp);
|
|
sel = (tmp >> 24) & 0x07;
|
|
|
|
/*
|
|
* Determine the M factor
|
|
* PLL local: M = FBDV
|
|
* CPU clock: M = FBDV * FWDVA * CPUDV0
|
|
* PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
|
|
*
|
|
*/
|
|
switch (sel) {
|
|
case PLL_FBK_CPU:
|
|
m = sysInfo->pllFwdDiv * cpudv0;
|
|
break;
|
|
case PLL_FBK_PERCLK:
|
|
m = sysInfo->pllFwdDiv * plb2xDiv * 2
|
|
* sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
|
|
break;
|
|
case PLL_FBK_PLL_LOCAL:
|
|
break;
|
|
default:
|
|
printf("%s unknown m\n", __FUNCTION__);
|
|
return;
|
|
|
|
}
|
|
m *= sysInfo->pllFbkDiv;
|
|
|
|
/*
|
|
* Determine VCO clock frequency
|
|
*/
|
|
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
|
|
(unsigned long long)sysClkPeriodPs;
|
|
|
|
/*
|
|
* Determine CPU clock frequency
|
|
*/
|
|
sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
|
|
|
|
/*
|
|
* Determine PLB clock frequency, ddr1x should be the same
|
|
*/
|
|
sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
|
|
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
|
|
sysInfo->freqDDR = sysInfo->freqPLB;
|
|
sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
|
|
sysInfo->freqUART = sysInfo->freqPLB;
|
|
}
|
|
|
|
#endif
|
|
|
|
int get_clocks (void)
|
|
{
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_405EX) || defined(CONFIG_405) || \
|
|
defined(CONFIG_440)
|
|
sys_info_t sys_info;
|
|
|
|
get_sys_info (&sys_info);
|
|
gd->cpu_clk = sys_info.freqProcessor;
|
|
gd->bus_clk = sys_info.freqPLB;
|
|
|
|
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
|
|
|
|
#ifdef CONFIG_IOP480
|
|
gd->cpu_clk = 66000000;
|
|
gd->bus_clk = 66000000;
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
|
|
/********************************************
|
|
* get_bus_freq
|
|
* return PLB bus freq in Hz
|
|
*********************************************/
|
|
ulong get_bus_freq (ulong dummy)
|
|
{
|
|
ulong val;
|
|
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_405EX) || defined(CONFIG_405) || \
|
|
defined(CONFIG_440)
|
|
sys_info_t sys_info;
|
|
|
|
get_sys_info (&sys_info);
|
|
val = sys_info.freqPLB;
|
|
|
|
#elif defined(CONFIG_IOP480)
|
|
|
|
val = 66;
|
|
|
|
#else
|
|
# error get_bus_freq() not implemented
|
|
#endif
|
|
|
|
return val;
|
|
}
|
|
|
|
#if !defined(CONFIG_IOP480)
|
|
ulong get_OPB_freq (void)
|
|
{
|
|
PPC4xx_SYS_INFO sys_info;
|
|
|
|
get_sys_info (&sys_info);
|
|
|
|
return sys_info.freqOPB;
|
|
}
|
|
#endif
|
|
|