upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Lokesh Vutla e2924e5904 ARM: k2g: Configure reset mux to device reset ... BOOTCFG_RSTMUX8 register controls the reset mux associated with the ARM. Timer5(dedicated to ARM) when used as WatchDog timer, the events it generates are routed to the above mux. Following are the 3 events that can controlled bt the reset mux: - Device Reset - An interrupt to the ARM_GIC - An interrupt to the ARM_GIC followed by a device reset. Right now to give a default watchdog behaviour "Device reset" is being selected. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com>		9 years ago
..
include/mach	ARM: k2g: Configure reset mux to device reset	9 years ago
Kconfig	ARM: k2g: Add kconfig support	9 years ago
Makefile	ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds	9 years ago
clock.c	ARM: keystone2: K2G: Add support for different arm/device speeds	9 years ago
cmd_clock.c	…
cmd_ddr3.c	…
cmd_mon.c	ARM: keystone2: Split monitor code / command code	9 years ago
cmd_poweroff.c	ARM: keystone2: Switch to using the poweroff command	9 years ago
config.mk	ARM: keystone2: Use dtb images by default	9 years ago
ddr3.c	ARM: k2g: Add ddr3 info	9 years ago
ddr3_spd.c	ARM: keystone2: use detected ddr3a size	9 years ago
init.c	ARM: keystone2: Add missing privilege ID settings	9 years ago
keystone.c	ARM: keystone2: Switch to using the poweroff command	9 years ago
mon.c	ARM: keystone2: Split monitor code / command code	9 years ago
msmc.c	…
psc.c	ARM: keystone2: psc: introduce function to hold and release module in reset.	9 years ago