upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
106 lines
2.7 KiB
106 lines
2.7 KiB
/*
|
|
* reset.c - logic for resetting the cpu
|
|
*
|
|
* Copyright (c) 2005-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/blackfin.h>
|
|
#include "cpu.h"
|
|
|
|
/* A system soft reset makes external memory unusable so force
|
|
* this function into L1. We use the compiler ssync here rather
|
|
* than SSYNC() because it's safe (no interrupts and such) and
|
|
* we save some L1. We do not need to force sanity in the SYSCR
|
|
* register as the BMODE selection bit is cleared by the soft
|
|
* reset while the Core B bit (on dual core parts) is cleared by
|
|
* the core reset.
|
|
*/
|
|
__attribute__ ((__l1_text__, __noreturn__))
|
|
static void bfin_reset(void)
|
|
{
|
|
/* Wait for completion of "system" events such as cache line
|
|
* line fills so that we avoid infinite stalls later on as
|
|
* much as possible. This code is in L1, so it won't trigger
|
|
* any such event after this point in time.
|
|
*/
|
|
__builtin_bfin_ssync();
|
|
|
|
/* The bootrom checks to see how it was reset and will
|
|
* automatically perform a software reset for us when
|
|
* it starts executing after the core reset.
|
|
*/
|
|
if (ANOMALY_05000353 || ANOMALY_05000386) {
|
|
/* Initiate System software reset. */
|
|
bfin_write_SWRST(0x7);
|
|
|
|
/* Due to the way reset is handled in the hardware, we need
|
|
* to delay for 10 SCLKS. The only reliable way to do this is
|
|
* to calculate the CCLK/SCLK ratio and multiply 10. For now,
|
|
* we'll assume worse case which is a 1:15 ratio.
|
|
*/
|
|
asm(
|
|
"LSETUP (1f, 1f) LC0 = %0\n"
|
|
"1: nop;"
|
|
:
|
|
: "a" (15 * 10)
|
|
: "LC0", "LB0", "LT0"
|
|
);
|
|
|
|
/* Clear System software reset */
|
|
bfin_write_SWRST(0);
|
|
|
|
/* The BF526 ROM will crash during reset */
|
|
#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
|
|
bfin_read_SWRST();
|
|
#endif
|
|
|
|
/* Wait for the SWRST write to complete. Cannot rely on SSYNC
|
|
* though as the System state is all reset now.
|
|
*/
|
|
asm(
|
|
"LSETUP (1f, 1f) LC1 = %0\n"
|
|
"1: nop;"
|
|
:
|
|
: "a" (15 * 1)
|
|
: "LC1", "LB1", "LT1"
|
|
);
|
|
}
|
|
|
|
while (1)
|
|
/* Issue core reset */
|
|
asm("raise 1");
|
|
}
|
|
|
|
/* We need to trampoline ourselves up into L1 since our linker
|
|
* does not have relaxtion support and will only generate a
|
|
* PC relative call with a 25 bit immediate. This is not enough
|
|
* to get us from the top of SDRAM into L1.
|
|
*/
|
|
__attribute__ ((__noreturn__))
|
|
static inline void bfin_reset_trampoline(void)
|
|
{
|
|
if (board_reset)
|
|
board_reset();
|
|
while (1)
|
|
asm("jump (%0);" : : "a" (bfin_reset));
|
|
}
|
|
|
|
__attribute__ ((__noreturn__))
|
|
void bfin_reset_or_hang(void)
|
|
{
|
|
#ifdef CONFIG_PANIC_HANG
|
|
hang();
|
|
#else
|
|
bfin_reset_trampoline();
|
|
#endif
|
|
}
|
|
|
|
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
bfin_reset_trampoline();
|
|
return 0;
|
|
}
|
|
|