upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/sata.h

108 lines
3.3 KiB

#if (DEBUG_SATA)
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
struct sata_ioports {
unsigned long cmd_addr;
unsigned long data_addr;
unsigned long error_addr;
unsigned long feature_addr;
unsigned long nsect_addr;
unsigned long lbal_addr;
unsigned long lbam_addr;
unsigned long lbah_addr;
unsigned long device_addr;
unsigned long status_addr;
unsigned long command_addr;
unsigned long altstatus_addr;
unsigned long ctl_addr;
unsigned long bmdma_addr;
unsigned long scr_addr;
};
struct sata_port {
unsigned char port_no; /* primary=0, secondary=1 */
struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */
unsigned char ctl_reg;
unsigned char last_ctl;
unsigned char port_state; /* 1-port is available and */
/* 0-port is not available */
unsigned char dev_mask;
};
/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
#ifdef SATA_DECL /*SATA library specific declarations */
#define ata_id_has_lba48(id) ((id)[83] & (1 << 10))
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
(((u64) (id)[(n) + 3] << 48) | \
((u64) (id)[(n) + 2] << 32) | \
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
#endif
#ifdef SATA_DECL /*SATA library specific declarations */
static inline void
ata_dump_id (u16 * id)
{
PRINTF ("49==0x%04x "
"53==0x%04x "
"63==0x%04x "
"64==0x%04x "
"75==0x%04x \n", id[49], id[53], id[63], id[64], id[75]);
PRINTF ("80==0x%04x "
"81==0x%04x "
"82==0x%04x "
"83==0x%04x "
"84==0x%04x \n", id[80], id[81], id[82], id[83], id[84]);
PRINTF ("88==0x%04x " "93==0x%04x\n", id[88], id[93]);
}
#endif
#ifdef SATA_DECL /*SATA library specific declarations */
int sata_bus_softreset (int num);
void sata_identify (int num, int dev);
void sata_port (struct sata_ioports *ioport);
void set_Feature_cmd (int num, int dev);
int sata_devchk (struct sata_ioports *ioaddr, int dev);
void dev_select (struct sata_ioports *ioaddr, int dev);
u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
u8 sata_chk_status (struct sata_ioports *ioaddr);
ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
void msleep (int count);
#else
extern int sata_bus_softreset (int num);
extern void sata_identify (int num, int dev);
extern void sata_port (struct sata_ioports *ioport);
extern void set_Feature_cmd (int num, int dev);
extern ulong sata_read (int device, ulong blknr,
lbaint_t blkcnt, void * buffer);
extern ulong sata_write (int device, ulong blknr,
lbaint_t blkcnt, void * buffer);
extern void msleep (int count);
#endif
/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
#ifdef DRV_DECL /*Driver specific declaration */
int init_sata (void);
#else
extern int init_sata (void);
#endif
#ifdef DRV_DECL /*Defines Driver Specific variables */
struct sata_port port[CFG_SATA_MAXBUS];
block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
int curr_dev = -1;
#else
extern struct sata_port port[CFG_SATA_MAXBUS];
extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
extern int curr_dev;
#endif