upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
595 lines
14 KiB
595 lines
14 KiB
/*
|
|
* (C) Copyright 2008
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#if defined(CONFIG_MGCOGE)
|
|
#include <mpc8260.h>
|
|
#endif
|
|
#include <ioports.h>
|
|
#include <malloc.h>
|
|
#include <hush.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
|
|
#include <i2c.h>
|
|
|
|
extern int i2c_soft_read_pin (void);
|
|
|
|
int ivm_calc_crc (unsigned char *buf, int len)
|
|
{
|
|
const unsigned short crc_tab[16] = {
|
|
0x0000, 0xCC01, 0xD801, 0x1400,
|
|
0xF001, 0x3C00, 0x2800, 0xE401,
|
|
0xA001, 0x6C00, 0x7800, 0xB401,
|
|
0x5000, 0x9C01, 0x8801, 0x4400};
|
|
|
|
unsigned short crc = 0; /* final result */
|
|
unsigned short r1 = 0; /* temp */
|
|
unsigned char byte = 0; /* input buffer */
|
|
int i;
|
|
|
|
/* calculate CRC from array data */
|
|
for (i = 0; i < len; i++) {
|
|
byte = buf[i];
|
|
|
|
/* lower 4 bits */
|
|
r1 = crc_tab[crc & 0xF];
|
|
crc = ((crc) >> 4) & 0x0FFF;
|
|
crc = crc ^ r1 ^ crc_tab[byte & 0xF];
|
|
|
|
/* upper 4 bits */
|
|
r1 = crc_tab[crc & 0xF];
|
|
crc = (crc >> 4) & 0x0FFF;
|
|
crc = crc ^ r1 ^ crc_tab[(byte >> 4) & 0xF];
|
|
}
|
|
return crc;
|
|
}
|
|
|
|
static int ivm_set_value (char *name, char *value)
|
|
{
|
|
char tempbuf[256];
|
|
|
|
if (value != NULL) {
|
|
sprintf (tempbuf, "%s=%s", name, value);
|
|
return set_local_var (tempbuf, 0);
|
|
} else {
|
|
unset_local_var (name);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
|
|
int check)
|
|
{
|
|
unsigned short val;
|
|
unsigned char valbuf[30];
|
|
|
|
if ((buf[off + 0] != buf[off + 2]) &&
|
|
(buf[off + 2] != buf[off + 4])) {
|
|
printf ("%s Error corrupted %s\n", __FUNCTION__, name);
|
|
val = -1;
|
|
} else {
|
|
val = buf[off + 0] + (buf[off + 1] << 8);
|
|
if ((val == 0) && (check == 1))
|
|
val = -1;
|
|
}
|
|
sprintf ((char *)valbuf, "%x", val);
|
|
ivm_set_value (name, (char *)valbuf);
|
|
return val;
|
|
}
|
|
|
|
#define INVENTORYBLOCKSIZE 0x100
|
|
#define INVENTORYDATAADDRESS 0x21
|
|
#define INVENTORYDATASIZE (INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3)
|
|
|
|
#define IVM_POS_SHORT_TEXT 0
|
|
#define IVM_POS_MANU_ID 1
|
|
#define IVM_POS_MANU_SERIAL 2
|
|
#define IVM_POS_PART_NUMBER 3
|
|
#define IVM_POS_BUILD_STATE 4
|
|
#define IVM_POS_SUPPLIER_PART_NUMBER 5
|
|
#define IVM_POS_DELIVERY_DATE 6
|
|
#define IVM_POS_SUPPLIER_BUILD_STATE 7
|
|
#define IVM_POS_CUSTOMER_ID 8
|
|
#define IVM_POS_CUSTOMER_PROD_ID 9
|
|
#define IVM_POS_HISTORY 10
|
|
#define IVM_POS_SYMBOL_ONLY 11
|
|
|
|
static char convert_char (char c)
|
|
{
|
|
return (c < ' ' || c > '~') ? '.' : c;
|
|
}
|
|
|
|
static int ivm_findinventorystring (int type,
|
|
unsigned char* const string,
|
|
unsigned long maxlen,
|
|
unsigned char *buf)
|
|
{
|
|
int xcode = 0;
|
|
unsigned long cr = 0;
|
|
unsigned long addr = INVENTORYDATAADDRESS;
|
|
unsigned long size = 0;
|
|
unsigned long nr = type;
|
|
int stop = 0; /* stop on semicolon */
|
|
|
|
memset(string, '\0', maxlen);
|
|
switch (type) {
|
|
case IVM_POS_SYMBOL_ONLY:
|
|
nr = 0;
|
|
stop= 1;
|
|
break;
|
|
default:
|
|
nr = type;
|
|
stop = 0;
|
|
}
|
|
|
|
/* Look for the requested number of CR. */
|
|
while ((cr != nr) && (addr < INVENTORYDATASIZE)) {
|
|
if ((buf[addr] == '\r')) {
|
|
cr++;
|
|
}
|
|
addr++;
|
|
}
|
|
|
|
/* the expected number of CR was found until the end of the IVM
|
|
* content --> fill string */
|
|
if (addr < INVENTORYDATASIZE) {
|
|
/* Copy the IVM string in the corresponding string */
|
|
for (; (buf[addr] != '\r') &&
|
|
((buf[addr] != ';') || (!stop)) &&
|
|
(size < (maxlen - 1) &&
|
|
(addr < INVENTORYDATASIZE)); addr++)
|
|
{
|
|
size += sprintf((char *)string + size, "%c",
|
|
convert_char (buf[addr]));
|
|
}
|
|
|
|
/* copy phase is done: check if everything is ok. If not,
|
|
* the inventory data is most probably corrupted: tell
|
|
* the world there is a problem! */
|
|
if (addr == INVENTORYDATASIZE) {
|
|
xcode = -1;
|
|
printf ("Error end of string not found\n");
|
|
} else if ((size >= (maxlen - 1)) &&
|
|
(buf[addr] != '\r')) {
|
|
xcode = -1;
|
|
printf ("string too long till next CR\n");
|
|
}
|
|
} else {
|
|
/* some CR are missing...
|
|
* the inventory data is most probably corrupted */
|
|
xcode = -1;
|
|
printf ("not enough cr found\n");
|
|
}
|
|
return xcode;
|
|
}
|
|
|
|
#define GET_STRING(name, which, len) \
|
|
if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \
|
|
ivm_set_value (name, (char *)valbuf); \
|
|
}
|
|
|
|
static int ivm_check_crc (unsigned char *buf, int block)
|
|
{
|
|
unsigned long crc;
|
|
unsigned long crceeprom;
|
|
|
|
crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
|
|
crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \
|
|
buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256);
|
|
if (crc != crceeprom) {
|
|
if (block == 0)
|
|
printf ("Error CRC Block: %d EEprom: calculated: \
|
|
%lx EEprom: %lx\n", block, crc, crceeprom);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ivm_analyze_block2 (unsigned char *buf, int len)
|
|
{
|
|
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
|
|
unsigned long count;
|
|
|
|
/* IVM_MacAddress */
|
|
sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X",
|
|
buf[1],
|
|
buf[2],
|
|
buf[3],
|
|
buf[4],
|
|
buf[5],
|
|
buf[6]);
|
|
ivm_set_value ("IVM_MacAddress", (char *)valbuf);
|
|
if (getenv ("ethaddr") == NULL)
|
|
setenv ((char *)"ethaddr", (char *)valbuf);
|
|
/* IVM_MacCount */
|
|
count = (buf[10] << 24) +
|
|
(buf[11] << 16) +
|
|
(buf[12] << 8) +
|
|
buf[13];
|
|
if (count == 0xffffffff)
|
|
count = 1;
|
|
sprintf ((char *)valbuf, "%lx", count);
|
|
ivm_set_value ("IVM_MacCount", (char *)valbuf);
|
|
return 0;
|
|
}
|
|
|
|
int ivm_analyze_eeprom (unsigned char *buf, int len)
|
|
{
|
|
unsigned short val;
|
|
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
|
|
unsigned char *tmp;
|
|
|
|
if (ivm_check_crc (buf, 0) != 0)
|
|
return -1;
|
|
|
|
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1);
|
|
val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1);
|
|
if (val != 0xffff) {
|
|
sprintf ((char *)valbuf, "%x", ((val /100) % 10));
|
|
ivm_set_value ("IVM_HWVariant", (char *)valbuf);
|
|
sprintf ((char *)valbuf, "%x", (val % 100));
|
|
ivm_set_value ("IVM_HWVersion", (char *)valbuf);
|
|
}
|
|
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0);
|
|
|
|
GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
|
|
GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
|
|
tmp = (unsigned char *) getenv("IVM_DeviceName");
|
|
if (tmp) {
|
|
int len = strlen ((char *)tmp);
|
|
int i = 0;
|
|
|
|
while (i < len) {
|
|
if (tmp[i] == ';') {
|
|
ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]);
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
if (i >= len)
|
|
ivm_set_value ("IVM_ShortText", NULL);
|
|
} else {
|
|
ivm_set_value ("IVM_ShortText", NULL);
|
|
}
|
|
GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32)
|
|
GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20)
|
|
GET_STRING("IVM_ManufacturerPartNumber", IVM_POS_PART_NUMBER, 32)
|
|
GET_STRING("IVM_ManufacturerBuildState", IVM_POS_BUILD_STATE, 32)
|
|
GET_STRING("IVM_SupplierPartNumber", IVM_POS_SUPPLIER_PART_NUMBER, 32)
|
|
GET_STRING("IVM_DelieveryDate", IVM_POS_DELIVERY_DATE, 32)
|
|
GET_STRING("IVM_SupplierBuildState", IVM_POS_SUPPLIER_BUILD_STATE, 32)
|
|
GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32)
|
|
GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
|
|
|
|
if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
|
|
return 0;
|
|
ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ivm_read_eeprom (void)
|
|
{
|
|
#if defined(CONFIG_I2C_MUX)
|
|
I2C_MUX_DEVICE *dev = NULL;
|
|
#endif
|
|
uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
|
|
uchar *buf;
|
|
unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
|
|
|
|
#if defined(CONFIG_I2C_MUX)
|
|
/* First init the Bus, select the Bus */
|
|
#if defined(CONFIG_SYS_I2C_IVM_BUS)
|
|
dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
|
|
#else
|
|
buf = (unsigned char *) getenv ("EEprom_ivm");
|
|
if (buf != NULL)
|
|
dev = i2c_mux_ident_muxstring (buf);
|
|
#endif
|
|
if (dev == NULL) {
|
|
printf ("Error couldnt add Bus for IVM\n");
|
|
return -1;
|
|
}
|
|
i2c_set_bus_num (dev->busid);
|
|
#endif
|
|
|
|
buf = (unsigned char *) getenv ("EEprom_ivm_addr");
|
|
if (buf != NULL)
|
|
dev_addr = simple_strtoul ((char *)buf, NULL, 16);
|
|
|
|
if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
|
|
printf ("Error reading EEprom\n");
|
|
return -2;
|
|
}
|
|
|
|
return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_I2C_INIT_BOARD)
|
|
#define DELAY_ABORT_SEQ 62
|
|
#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000))
|
|
|
|
#if defined(CONFIG_MGCOGE)
|
|
#define SDA_MASK 0x00010000
|
|
#define SCL_MASK 0x00020000
|
|
static void set_pin (int state, unsigned long mask)
|
|
{
|
|
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
|
|
|
|
if (state)
|
|
iop->pdat |= (mask);
|
|
else
|
|
iop->pdat &= ~(mask);
|
|
|
|
iop->pdir |= (mask);
|
|
}
|
|
|
|
static int get_pin (unsigned long mask)
|
|
{
|
|
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
|
|
|
|
iop->pdir &= ~(mask);
|
|
return (0 != (iop->pdat & (mask)));
|
|
}
|
|
|
|
static void set_sda (int state)
|
|
{
|
|
set_pin (state, SDA_MASK);
|
|
}
|
|
|
|
static void set_scl (int state)
|
|
{
|
|
set_pin (state, SCL_MASK);
|
|
}
|
|
|
|
static int get_sda (void)
|
|
{
|
|
return get_pin (SDA_MASK);
|
|
}
|
|
|
|
static int get_scl (void)
|
|
{
|
|
return get_pin (SCL_MASK);
|
|
}
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
static void setports (int gpio)
|
|
{
|
|
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
|
|
|
|
if (gpio) {
|
|
iop->ppar &= ~(SDA_MASK | SCL_MASK);
|
|
iop->podr &= ~(SDA_MASK | SCL_MASK);
|
|
} else {
|
|
iop->ppar |= (SDA_MASK | SCL_MASK);
|
|
iop->pdir &= ~(SDA_MASK | SCL_MASK);
|
|
iop->podr |= (SDA_MASK | SCL_MASK);
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_KM8XX)
|
|
static void set_sda (int state)
|
|
{
|
|
I2C_SDA(state);
|
|
}
|
|
|
|
static void set_scl (int state)
|
|
{
|
|
I2C_SCL(state);
|
|
}
|
|
|
|
static int get_sda (void)
|
|
{
|
|
return I2C_READ;
|
|
}
|
|
|
|
static int get_scl (void)
|
|
{
|
|
int val;
|
|
|
|
*(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF;
|
|
udelay (1);
|
|
val = *(unsigned char *)(I2C_BASE_PORT);
|
|
|
|
return ((val & SCL_BIT) == SCL_BIT);
|
|
}
|
|
|
|
#endif
|
|
|
|
#if !defined(CONFIG_KMETER1)
|
|
static void writeStartSeq (void)
|
|
{
|
|
set_sda (1);
|
|
udelay (DELAY_HALF_PERIOD);
|
|
set_scl (1);
|
|
udelay (DELAY_HALF_PERIOD);
|
|
set_sda (0);
|
|
udelay (DELAY_HALF_PERIOD);
|
|
set_scl (0);
|
|
udelay (DELAY_HALF_PERIOD);
|
|
}
|
|
|
|
/* I2C is a synchronous protocol and resets of the processor in the middle
|
|
of an access can block the I2C Bus until a powerdown of the full unit is
|
|
done. This function toggles the SCL until the SCL and SCA line are
|
|
released, but max. 16 times, after this a I2C start-sequence is sent.
|
|
This I2C Deblocking mechanism was developed by Keymile in association
|
|
with Anatech and Atmel in 1998.
|
|
*/
|
|
static int i2c_make_abort (void)
|
|
{
|
|
int scl_state = 0;
|
|
int sda_state = 0;
|
|
int i = 0;
|
|
int ret = 0;
|
|
|
|
if (!get_sda ()) {
|
|
ret = -1;
|
|
while (i < 16) {
|
|
i++;
|
|
set_scl (0);
|
|
udelay (DELAY_ABORT_SEQ);
|
|
set_scl (1);
|
|
udelay (DELAY_ABORT_SEQ);
|
|
scl_state = get_scl ();
|
|
sda_state = get_sda ();
|
|
if (scl_state && sda_state) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (ret == 0) {
|
|
for (i =0; i < 5; i++) {
|
|
writeStartSeq ();
|
|
}
|
|
}
|
|
get_sda ();
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* i2c_init_board - reset i2c bus. When the board is powercycled during a
|
|
* bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
|
|
*/
|
|
void i2c_init_board(void)
|
|
{
|
|
#if defined(CONFIG_KMETER1)
|
|
struct fsl_i2c *dev;
|
|
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
|
|
uchar dummy;
|
|
|
|
out_8 (&dev->cr, (I2C_CR_MSTA));
|
|
out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
|
|
dummy = in_8(&dev->dr);
|
|
dummy = in_8(&dev->dr);
|
|
if (dummy != 0xff) {
|
|
dummy = in_8(&dev->dr);
|
|
}
|
|
out_8 (&dev->cr, (I2C_CR_MEN));
|
|
out_8 (&dev->cr, 0x00);
|
|
out_8 (&dev->cr, (I2C_CR_MEN));
|
|
|
|
#else
|
|
#if defined(CONFIG_HARD_I2C)
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
|
|
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
|
|
|
|
/* disable I2C controller first, otherwhise it thinks we want to */
|
|
/* talk to the slave port... */
|
|
i2c->i2c_i2mod &= ~0x01;
|
|
|
|
/* Set the PortPins to GPIO */
|
|
setports (1);
|
|
#endif
|
|
|
|
/* Now run the AbortSequence() */
|
|
i2c_make_abort ();
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
/* Set the PortPins back to use for I2C */
|
|
setports (0);
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
int fdt_set_node_and_value (void *blob,
|
|
char *nodename,
|
|
char *regname,
|
|
void *var,
|
|
int size)
|
|
{
|
|
int ret = 0;
|
|
int nodeoffset = 0;
|
|
|
|
nodeoffset = fdt_path_offset (blob, nodename);
|
|
if (nodeoffset >= 0) {
|
|
ret = fdt_setprop (blob, nodeoffset, regname, var,
|
|
size);
|
|
if (ret < 0)
|
|
printf("ft_blob_update(): cannot set %s/%s "
|
|
"property err:%s\n", nodename, regname,
|
|
fdt_strerror (ret));
|
|
} else {
|
|
printf("ft_blob_update(): cannot find %s node "
|
|
"err:%s\n", nodename, fdt_strerror (nodeoffset));
|
|
}
|
|
return ret;
|
|
}
|
|
int fdt_get_node_and_value (void *blob,
|
|
char *nodename,
|
|
char *propname,
|
|
void **var)
|
|
{
|
|
int len;
|
|
int nodeoffset = 0;
|
|
|
|
nodeoffset = fdt_path_offset (blob, nodename);
|
|
if (nodeoffset >= 0) {
|
|
*var = (void *)fdt_getprop (blob, nodeoffset, propname, &len);
|
|
if (len == 0) {
|
|
/* no value */
|
|
printf ("%s no value\n", __FUNCTION__);
|
|
return -1;
|
|
} else if (len > 0) {
|
|
return len;
|
|
} else {
|
|
printf ("libfdt fdt_getprop(): %s\n",
|
|
fdt_strerror(len));
|
|
return -2;
|
|
}
|
|
} else {
|
|
printf("%s: cannot find %s node err:%s\n", __FUNCTION__,
|
|
nodename, fdt_strerror (nodeoffset));
|
|
return -3;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int ethernet_present (void)
|
|
{
|
|
return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80);
|
|
}
|
|
|
|
int board_eth_init (bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_KEYMILE_HDLC_ENET
|
|
(void)keymile_hdlc_enet_initialize (bis);
|
|
#endif
|
|
if (ethernet_present ()) {
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|