upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
366 lines
8.5 KiB
366 lines
8.5 KiB
/*
|
|
* Functions to access the TSC2000 controller on TRAB board (used for scanning
|
|
* thermo sensors)
|
|
*
|
|
* Copyright (C) 2003 Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
|
|
*
|
|
* Copyright (C) 2002 DENX Software Engineering, Wolfgang Denk, wd@denx.de
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/s3c24x0_cpu.h>
|
|
#include <asm/io.h>
|
|
#include <div64.h>
|
|
#include "tsc2000.h"
|
|
|
|
#include "Pt1000_temp_data.h"
|
|
|
|
/* helper function */
|
|
#define abs(value) (((value) < 0) ? ((value)*-1) : (value))
|
|
|
|
/*
|
|
* Maximal allowed deviation between two immediate meassurments of an analog
|
|
* thermo channel. 1 DIGIT = 0.0276 °C. This is used to filter sporadic
|
|
* "jumps" in measurment.
|
|
*/
|
|
#define MAX_DEVIATION 18 /* unit: DIGITs of adc; 18 DIGIT = 0.5 °C */
|
|
|
|
void tsc2000_spi_init(void)
|
|
{
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
|
|
int i;
|
|
|
|
/* Configure I/O ports. */
|
|
gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000;
|
|
gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000;
|
|
gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000;
|
|
gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000;
|
|
|
|
CLR_CS_TOUCH();
|
|
|
|
spi->ch[0].sppre = 0x1F; /* Baud-rate ca. 514kHz */
|
|
spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */
|
|
spi->ch[0].spcon = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
|
|
CPHA=1 */
|
|
|
|
/* Dummy byte ensures clock to be low. */
|
|
for (i = 0; i < 10; i++) {
|
|
spi->ch[0].sptdat = 0xFF;
|
|
}
|
|
spi_wait_transmit_done();
|
|
}
|
|
|
|
|
|
void spi_wait_transmit_done(void)
|
|
{
|
|
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
|
|
|
|
while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */
|
|
;
|
|
}
|
|
|
|
|
|
void tsc2000_write(unsigned short reg, unsigned short data)
|
|
{
|
|
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
|
|
unsigned int command;
|
|
|
|
SET_CS_TOUCH();
|
|
command = reg;
|
|
spi->ch[0].sptdat = (command & 0xFF00) >> 8;
|
|
spi_wait_transmit_done();
|
|
spi->ch[0].sptdat = (command & 0x00FF);
|
|
spi_wait_transmit_done();
|
|
spi->ch[0].sptdat = (data & 0xFF00) >> 8;
|
|
spi_wait_transmit_done();
|
|
spi->ch[0].sptdat = (data & 0x00FF);
|
|
spi_wait_transmit_done();
|
|
|
|
CLR_CS_TOUCH();
|
|
}
|
|
|
|
|
|
unsigned short tsc2000_read (unsigned short reg)
|
|
{
|
|
unsigned short command, data;
|
|
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
|
|
|
|
SET_CS_TOUCH();
|
|
command = 0x8000 | reg;
|
|
|
|
spi->ch[0].sptdat = (command & 0xFF00) >> 8;
|
|
spi_wait_transmit_done();
|
|
spi->ch[0].sptdat = (command & 0x00FF);
|
|
spi_wait_transmit_done();
|
|
|
|
spi->ch[0].sptdat = 0xFF;
|
|
spi_wait_transmit_done();
|
|
data = spi->ch[0].sprdat;
|
|
spi->ch[0].sptdat = 0xFF;
|
|
spi_wait_transmit_done();
|
|
|
|
CLR_CS_TOUCH();
|
|
return (spi->ch[0].sprdat & 0x0FF) | (data << 8);
|
|
}
|
|
|
|
|
|
void tsc2000_set_mux (unsigned int channel)
|
|
{
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
|
|
CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
|
|
CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
|
|
switch (channel) {
|
|
case 0:
|
|
CLR_MUX0; CLR_MUX1;
|
|
SET_MUX1_ENABLE;
|
|
break;
|
|
case 1:
|
|
SET_MUX0; CLR_MUX1;
|
|
SET_MUX1_ENABLE;
|
|
break;
|
|
case 2:
|
|
CLR_MUX0; SET_MUX1;
|
|
SET_MUX1_ENABLE;
|
|
break;
|
|
case 3:
|
|
SET_MUX0; SET_MUX1;
|
|
SET_MUX1_ENABLE;
|
|
break;
|
|
case 4:
|
|
CLR_MUX0; CLR_MUX1;
|
|
SET_MUX2_ENABLE;
|
|
break;
|
|
case 5:
|
|
SET_MUX0; CLR_MUX1;
|
|
SET_MUX2_ENABLE;
|
|
break;
|
|
case 6:
|
|
CLR_MUX0; SET_MUX1;
|
|
SET_MUX2_ENABLE;
|
|
break;
|
|
case 7:
|
|
SET_MUX0; SET_MUX1;
|
|
SET_MUX2_ENABLE;
|
|
break;
|
|
case 8:
|
|
CLR_MUX0; CLR_MUX1;
|
|
SET_MUX3_ENABLE;
|
|
break;
|
|
case 9:
|
|
SET_MUX0; CLR_MUX1;
|
|
SET_MUX3_ENABLE;
|
|
break;
|
|
case 10:
|
|
CLR_MUX0; SET_MUX1;
|
|
SET_MUX3_ENABLE;
|
|
break;
|
|
case 11:
|
|
SET_MUX0; SET_MUX1;
|
|
SET_MUX3_ENABLE;
|
|
break;
|
|
case 12:
|
|
CLR_MUX0; CLR_MUX1;
|
|
SET_MUX4_ENABLE;
|
|
break;
|
|
case 13:
|
|
SET_MUX0; CLR_MUX1;
|
|
SET_MUX4_ENABLE;
|
|
break;
|
|
case 14:
|
|
CLR_MUX0; SET_MUX1;
|
|
SET_MUX4_ENABLE;
|
|
break;
|
|
case 15:
|
|
SET_MUX0; SET_MUX1;
|
|
SET_MUX4_ENABLE;
|
|
break;
|
|
default:
|
|
CLR_MUX0; CLR_MUX1;
|
|
}
|
|
}
|
|
|
|
|
|
void tsc2000_set_range (unsigned int range)
|
|
{
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
|
|
switch (range) {
|
|
case 1:
|
|
CLR_SEL_TEMP_V_0; SET_SEL_TEMP_V_1;
|
|
CLR_SEL_TEMP_V_2; CLR_SEL_TEMP_V_3;
|
|
break;
|
|
case 2:
|
|
CLR_SEL_TEMP_V_0; CLR_SEL_TEMP_V_1;
|
|
CLR_SEL_TEMP_V_2; SET_SEL_TEMP_V_3;
|
|
break;
|
|
case 3:
|
|
SET_SEL_TEMP_V_0; CLR_SEL_TEMP_V_1;
|
|
SET_SEL_TEMP_V_2; CLR_SEL_TEMP_V_3;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
u16 tsc2000_read_channel (unsigned int channel)
|
|
{
|
|
u16 res;
|
|
|
|
tsc2000_set_mux(channel);
|
|
udelay(20 * TSC2000_DELAY_BASE);
|
|
|
|
tsc2000_write(TSC2000_REG_ADC, 0x2036);
|
|
adc_wait_conversion_done ();
|
|
res = tsc2000_read(TSC2000_REG_AUX1);
|
|
return res;
|
|
}
|
|
|
|
|
|
s32 tsc2000_contact_temp (void)
|
|
{
|
|
long adc_pt1000, offset;
|
|
long u_pt1000;
|
|
long contact_temp;
|
|
long temp1, temp2;
|
|
|
|
tsc2000_reg_init ();
|
|
tsc2000_set_range (3);
|
|
|
|
/*
|
|
* Because of sporadic "jumps" in the measured adc values every
|
|
* channel is read two times. If there is a significant difference
|
|
* between the two measurements, then print an error and do a third
|
|
* measurement, because it is very unlikely that a successive third
|
|
* measurement goes also wrong.
|
|
*/
|
|
temp1 = tsc2000_read_channel (14);
|
|
temp2 = tsc2000_read_channel (14);
|
|
if (abs(temp2 - temp1) < MAX_DEVIATION)
|
|
adc_pt1000 = temp2;
|
|
else {
|
|
printf ("%s: read adc value (channel 14) exceeded max allowed "
|
|
"deviation: %d * 0.0276 °C\n",
|
|
__FUNCTION__, MAX_DEVIATION);
|
|
printf ("adc value 1: %ld DIGITs\nadc value 2: %ld DIGITs\n",
|
|
temp1, temp2);
|
|
adc_pt1000 = tsc2000_read_channel (14);
|
|
printf ("use (third read) adc value: adc_pt1000 = "
|
|
"%ld DIGITs\n", adc_pt1000);
|
|
}
|
|
debug ("read channel 14 (pt1000 adc value): %ld\n", adc_pt1000);
|
|
|
|
temp1 = tsc2000_read_channel (15);
|
|
temp2 = tsc2000_read_channel (15);
|
|
if (abs(temp2 - temp1) < MAX_DEVIATION)
|
|
offset = temp2;
|
|
else {
|
|
printf ("%s: read adc value (channel 15) exceeded max allowed "
|
|
"deviation: %d * 0.0276 °C\n",
|
|
__FUNCTION__, MAX_DEVIATION);
|
|
printf ("adc value 1: %ld DIGITs\nadc value 2: %ld DIGITs\n",
|
|
temp1, temp2);
|
|
offset = tsc2000_read_channel (15);
|
|
printf ("use (third read) adc value: offset = %ld DIGITs\n",
|
|
offset);
|
|
}
|
|
debug ("read channel 15 (offset): %ld\n", offset);
|
|
|
|
/*
|
|
* Formula for calculating voltage drop on PT1000 resistor: u_pt1000 =
|
|
* x_range3 * (adc_raw - offset) / 10. Formula to calculate x_range3:
|
|
* x_range3 = (2500 * (1000000 + err_vref + err_amp3)) / (4095*6). The
|
|
* error correction Values err_vref and err_amp3 are assumed as 0 in
|
|
* u-boot, because this could cause only a very small error (< 1%).
|
|
*/
|
|
u_pt1000 = (101750 * (adc_pt1000 - offset)) / 10;
|
|
debug ("u_pt1000: %ld\n", u_pt1000);
|
|
|
|
if (tsc2000_interpolate(u_pt1000, Pt1000_temp_table,
|
|
&contact_temp) == -1) {
|
|
printf ("%s: error interpolating PT1000 vlaue\n",
|
|
__FUNCTION__);
|
|
return (-1000);
|
|
}
|
|
debug ("contact_temp: %ld\n", contact_temp);
|
|
|
|
return contact_temp;
|
|
}
|
|
|
|
|
|
void tsc2000_reg_init (void)
|
|
{
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
|
|
tsc2000_write(TSC2000_REG_ADC, 0x2036);
|
|
tsc2000_write(TSC2000_REG_REF, 0x0011);
|
|
tsc2000_write(TSC2000_REG_DACCTL, 0x0000);
|
|
|
|
CON_MUX0;
|
|
CON_MUX1;
|
|
|
|
CON_MUX1_ENABLE;
|
|
CON_MUX2_ENABLE;
|
|
CON_MUX3_ENABLE;
|
|
CON_MUX4_ENABLE;
|
|
|
|
CON_SEL_TEMP_V_0;
|
|
CON_SEL_TEMP_V_1;
|
|
CON_SEL_TEMP_V_2;
|
|
CON_SEL_TEMP_V_3;
|
|
|
|
tsc2000_set_mux(0);
|
|
tsc2000_set_range(0);
|
|
}
|
|
|
|
|
|
int tsc2000_interpolate(long value, long data[][2], long *result)
|
|
{
|
|
int i;
|
|
unsigned long long val;
|
|
|
|
/* the data is sorted and the first element is upper
|
|
* limit so we can easily check for out-of-band values
|
|
*/
|
|
if (data[0][0] < value || data[1][0] > value)
|
|
return -1;
|
|
|
|
i = 1;
|
|
while (data[i][0] < value)
|
|
i++;
|
|
|
|
/* To prevent overflow we have to store the intermediate
|
|
result in 'long long'.
|
|
*/
|
|
|
|
val = ((unsigned long long)(data[i][1] - data[i-1][1])
|
|
* (unsigned long long)(value - data[i-1][0]));
|
|
do_div(val, (data[i][0] - data[i-1][0]));
|
|
*result = data[i-1][1] + val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
void adc_wait_conversion_done(void)
|
|
{
|
|
while (!(tsc2000_read(TSC2000_REG_ADC) & (1 << 14)));
|
|
}
|
|
|