upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
317 lines
7.7 KiB
317 lines
7.7 KiB
/*
|
|
* (C) Copyright 2003-2008
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc5xxx.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <malloc.h>
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
static void sdram_start (int hi_addr)
|
|
{
|
|
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
|
|
|
|
/* unlock mode register */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* precharge all banks */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
#if SDRAM_DDR
|
|
/* set mode register: extended mode */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* set mode register: reset DLL */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
|
|
__asm__ volatile ("sync");
|
|
#endif
|
|
|
|
/* precharge all banks */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* auto refresh */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* set mode register */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* normal operation */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* ATTENTION: Although partially referenced initdram does NOT make real use
|
|
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
|
|
* is something else than 0x00000000.
|
|
*/
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
ulong dramsize = 0;
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
ulong test1, test2;
|
|
uint svr, pvr;
|
|
|
|
/* setup SDRAM chip selects */
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
|
|
__asm__ volatile ("sync");
|
|
|
|
/* setup config registers */
|
|
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
|
|
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
|
|
__asm__ volatile ("sync");
|
|
|
|
#if SDRAM_DDR
|
|
/* set tap delay */
|
|
*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
|
|
__asm__ volatile ("sync");
|
|
#endif
|
|
|
|
/* find RAM size using SDRAM CS0 only */
|
|
sdram_start(0);
|
|
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
|
|
sdram_start(1);
|
|
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
|
|
if (test1 > test2) {
|
|
sdram_start(0);
|
|
dramsize = test1;
|
|
} else {
|
|
dramsize = test2;
|
|
}
|
|
|
|
/* memory smaller than 1MB is impossible */
|
|
if (dramsize < (1 << 20)) {
|
|
dramsize = 0;
|
|
}
|
|
|
|
/* set SDRAM CS0 size according to the amount of RAM found */
|
|
if (dramsize > 0) {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
|
|
__builtin_ffs(dramsize >> 20) - 1;
|
|
} else {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
|
|
}
|
|
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
|
|
#else /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/* retrieve size of memory connected to SDRAM CS0 */
|
|
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
|
|
if (dramsize >= 0x13) {
|
|
dramsize = (1 << (dramsize - 0x13)) << 20;
|
|
} else {
|
|
dramsize = 0;
|
|
}
|
|
|
|
/* retrieve size of memory connected to SDRAM CS1 */
|
|
dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
|
|
if (dramsize2 >= 0x13) {
|
|
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
|
|
} else {
|
|
dramsize2 = 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/*
|
|
* On MPC5200B we need to set the special configuration delay in the
|
|
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
|
|
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
|
|
*
|
|
* "The SDelay should be written to a value of 0x00000004. It is
|
|
* required to account for changes caused by normal wafer processing
|
|
* parameters."
|
|
*/
|
|
svr = get_svr();
|
|
pvr = get_pvr();
|
|
if ((SVR_MJREV(svr) >= 2) &&
|
|
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
|
|
|
|
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
|
|
__asm__ volatile ("sync");
|
|
}
|
|
|
|
/* return dramsize + dramsize2; */
|
|
return dramsize;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: HMI1001\n");
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PREBOOT
|
|
|
|
static uchar kbd_magic_prefix[] = "key_magic";
|
|
static uchar kbd_command_prefix[] = "key_cmd";
|
|
|
|
#define S1_ROT 0xf0
|
|
#define S2_Q 0x40
|
|
#define S2_M 0x20
|
|
|
|
struct kbd_data_t {
|
|
char s1;
|
|
char s2;
|
|
};
|
|
|
|
struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
|
|
{
|
|
kbd_data->s1 = *((volatile uchar*)(CONFIG_SYS_STATUS1_BASE));
|
|
kbd_data->s2 = *((volatile uchar*)(CONFIG_SYS_STATUS2_BASE));
|
|
|
|
return kbd_data;
|
|
}
|
|
|
|
static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
|
|
{
|
|
char s1 = str[0];
|
|
char s2;
|
|
|
|
if (s1 >= '0' && s1 <= '9')
|
|
s1 -= '0';
|
|
else if (s1 >= 'a' && s1 <= 'f')
|
|
s1 = s1 - 'a' + 10;
|
|
else if (s1 >= 'A' && s1 <= 'F')
|
|
s1 = s1 - 'A' + 10;
|
|
else
|
|
return -1;
|
|
|
|
if (((S1_ROT & kbd_data->s1) >> 4) != s1)
|
|
return -1;
|
|
|
|
s2 = (S2_Q | S2_M) & kbd_data->s2;
|
|
|
|
switch (str[1]) {
|
|
case 'q':
|
|
case 'Q':
|
|
if (s2 == S2_Q)
|
|
return -1;
|
|
break;
|
|
case 'm':
|
|
case 'M':
|
|
if (s2 == S2_M)
|
|
return -1;
|
|
break;
|
|
case '\0':
|
|
if (s2 == (S2_Q | S2_M))
|
|
return 0;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
if (str[2])
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char *key_match (const struct kbd_data_t *kbd_data)
|
|
{
|
|
char magic[sizeof (kbd_magic_prefix) + 1];
|
|
char *suffix;
|
|
char *kbd_magic_keys;
|
|
|
|
/*
|
|
* The following string defines the characters that can be appended
|
|
* to "key_magic" to form the names of environment variables that
|
|
* hold "magic" key codes, i. e. such key codes that can cause
|
|
* pre-boot actions. If the string is empty (""), then only
|
|
* "key_magic" is checked (old behaviour); the string "125" causes
|
|
* checks for "key_magic1", "key_magic2" and "key_magic5", etc.
|
|
*/
|
|
if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
|
|
kbd_magic_keys = "";
|
|
|
|
/* loop over all magic keys;
|
|
* use '\0' suffix in case of empty string
|
|
*/
|
|
for (suffix = kbd_magic_keys; *suffix ||
|
|
suffix == kbd_magic_keys; ++suffix) {
|
|
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
|
|
|
|
if (compare_magic(kbd_data, getenv(magic)) == 0) {
|
|
char cmd_name[sizeof (kbd_command_prefix) + 1];
|
|
char *cmd;
|
|
|
|
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
|
|
cmd = getenv (cmd_name);
|
|
|
|
return (cmd);
|
|
}
|
|
}
|
|
|
|
return (NULL);
|
|
}
|
|
|
|
#endif /* CONFIG_PREBOOT */
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
#ifdef CONFIG_PREBOOT
|
|
struct kbd_data_t kbd_data;
|
|
/* Decode keys */
|
|
char *str = strdup (key_match (get_keys (&kbd_data)));
|
|
/* Set or delete definition */
|
|
setenv ("preboot", str);
|
|
free (str);
|
|
#endif /* CONFIG_PREBOOT */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r (void)
|
|
{
|
|
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
|
|
*(vu_long *)MPC5XXX_BOOTCS_START =
|
|
*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
|
|
*(vu_long *)MPC5XXX_BOOTCS_STOP =
|
|
*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
|
|
return 0;
|
|
}
|
|
#ifdef CONFIG_PCI
|
|
static struct pci_controller hose;
|
|
|
|
extern void pci_mpc5xxx_init(struct pci_controller *);
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
pci_mpc5xxx_init(&hose);
|
|
}
|
|
#endif
|
|
|