upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/powerpc/cpu/mpc8260/ether_scc.c

367 lines
10 KiB

/*
* MPC8260 SCC Ethernet
*
* Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
*
* (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright (c) 2001
* Advent Networks, Inc. <http://www.adventnetworks.com>
* Jay Monkman <jtm@smoothsmoothie.com>
*
* Modified so that it plays nicely when more than one ETHERNET interface
* is in use a la ether_fcc.c.
* (C) Copyright 2008
* DENX Software Engineerin GmbH
* Gary Jennejohn <garyj@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/cpm_8260.h>
#include <mpc8260.h>
#include <malloc.h>
#include <net.h>
#include <command.h>
#include <config.h>
#if (CONFIG_ETHER_INDEX == 1)
# define PROFF_ENET PROFF_SCC1
# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC1 |\
CMXSCR_RS1CS_MSK |\
CMXSCR_TS1CS_MSK)
#elif (CONFIG_ETHER_INDEX == 2)
# define PROFF_ENET PROFF_SCC2
# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC2 |\
CMXSCR_RS2CS_MSK |\
CMXSCR_TS2CS_MSK)
#elif (CONFIG_ETHER_INDEX == 3)
# define PROFF_ENET PROFF_SCC3
# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC3 |\
CMXSCR_RS3CS_MSK |\
CMXSCR_TS3CS_MSK)
#elif (CONFIG_ETHER_INDEX == 4)
# define PROFF_ENET PROFF_SCC4
# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC4 |\
CMXSCR_RS4CS_MSK |\
CMXSCR_TS4CS_MSK)
#endif
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#if !defined(CONFIG_SYS_SCC_TOUT_LOOP)
#define CONFIG_SYS_SCC_TOUT_LOOP 1000000
#endif
static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
static uint rxIdx; /* index of the current RX buffer */
static uint txIdx; /* index of the current TX buffer */
/*
* SCC Ethernet Tx and Rx buffer descriptors allocated at the
* immr->udata_bd address on Dual-Port RAM
* Provide for Double Buffering
*/
typedef volatile struct CommonBufferDescriptor {
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
} RTXBD;
static RTXBD *rtx;
static int sec_send(struct eth_device *dev, void *packet, int length)
{
int i;
int result = 0;
if (length <= 0) {
printf("scc: bad packet size: %d\n", length);
goto out;
}
for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
puts ("scc: tx buffer not ready\n");
goto out;
}
}
rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
BD_ENET_TX_WRAP);
for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
puts ("scc: tx error\n");
goto out;
}
}
/* return only status bits */
result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
out:
return result;
}
static int sec_rx(struct eth_device *dev)
{
int length;
for (;;)
{
if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
length = -1;
break; /* nothing received - leave for() loop */
}
length = rtx->rxbd[rxIdx].cbd_datlen;
if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
{
printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
}
else
{
/* Pass the packet up to the protocol layers. */
net_process_received_packet(net_rx_packets[rxIdx], length - 4);
}
/* Give the buffer back to the SCC. */
rtx->rxbd[rxIdx].cbd_datlen = 0;
/* wrap around buffer index when necessary */
if ((rxIdx + 1) >= PKTBUFSRX) {
rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
BD_ENET_RX_EMPTY);
rxIdx = 0;
}
else {
rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
rxIdx++;
}
}
return length;
}
/**************************************************************
*
* SCC Ethernet Initialization Routine
*
*************************************************************/
static int sec_init(struct eth_device *dev, bd_t *bis)
{
int i;
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
scc_enet_t *pram_ptr;
uint dpaddr;
uchar ea[6];
rxIdx = 0;
txIdx = 0;
/*
* Assign static pointer to BD area.
* Avoid exhausting DPRAM, which would cause a panic.
*/
if (rtx == NULL) {
dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
}
/* 24.21 - (1-3): ioports have been set up already */
/* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
immr->im_cpmux.cmx_uar = 0;
immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
CONFIG_SYS_CMXSCR_VALUE);
/* 24.21 (6) write RBASE and TBASE to parameter RAM */
pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]);
pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]);
pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]);
pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */
pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */
pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */
pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
/* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
CPM_CR_ENET_SBLOCK,
0x0c,
CPM_CR_INIT_TRX) | CPM_CR_FLG;
/* 24.21 - (8-18): Set up parameter RAM */
pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */
pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
eth_getenv_enetaddr("ethaddr", ea);
pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
/* 24.21 - (19): Initialize RxBD */
for (i = 0; i < PKTBUFSRX; i++)
{
rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
rtx->rxbd[i].cbd_datlen = 0; /* Reset */
rtx->rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i];
}
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/* 24.21 - (20): Initialize TxBD */
for (i = 0; i < TX_BUF_CNT; i++)
{
rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
BD_ENET_TX_LAST |
BD_ENET_TX_TC);
rtx->txbd[i].cbd_datlen = 0; /* Reset */
rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
}
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
/* 24.21 - (21): Write 0xffff to SCCE */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0);
/* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
SCCE_ENET_RXF |
SCCE_ENET_TXB);
/* 24.21 - (23): we don't use ethernet interrupts */
/* 24.21 - (24): Clear GSMR_H to enable normal operations */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0;
/* 24.21 - (25): Clear GSMR_L to enable normal operations */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI |
SCC_GSMRL_TPL_48 |
SCC_GSMRL_TPP_10 |
SCC_GSMRL_MODE_ENET);
/* 24.21 - (26): Initialize DSR */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
/* 24.21 - (27): Initialize PSMR2
*
* Settings:
* CRC = 32-Bit CCITT
* NIB = Begin searching for SFD 22 bits after RENA
* FDE = Full Duplex Enable
* BRO = Reject broadcast packets
* PROMISCOUS = Catch all packets regardless of dest. MAC adress
*/
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC |
SCC_PSMR_NIB22 |
#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
SCC_PSMR_FDE |
#endif
#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
SCC_PSMR_BRO |
#endif
#if defined(CONFIG_SCC_ENET_PROMISCOUS)
SCC_PSMR_PRO |
#endif
0;
/* 24.21 - (28): Write to GSMR_L to enable SCC */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
SCC_GSMRL_ENT);
return 0;
}
static void sec_halt(struct eth_device *dev)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
SCC_GSMRL_ENT);
}
#if 0
static void sec_restart(void)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
SCC_GSMRL_ENT);
}
#endif
int mpc82xx_scc_enet_initialize(bd_t *bis)
{
struct eth_device *dev;
dev = (struct eth_device *) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "SCC");
dev->init = sec_init;
dev->halt = sec_halt;
dev->send = sec_send;
dev->recv = sec_rx;
eth_register(dev);
return 1;
}