upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/mpc512x_fec.c

755 lines
17 KiB

/*
* (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Derived from the MPC8xx FEC driver.
* Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com>
*/
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <miiphy.h>
#include <asm/io.h>
#include "mpc512x_fec.h"
DECLARE_GLOBAL_DATA_PTR;
#define DEBUG 0
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
int fec512x_miiphy_read(const char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
int fec512x_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data);
int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
static uchar rx_buff[FEC_BUFFER_SIZE];
static int rx_buff_idx = 0;
/********************************************************************/
#if (DEBUG & 0x2)
static void mpc512x_fec_phydump (char *devname)
{
u16 phyStatus, i;
u8 phyAddr = CONFIG_PHY_ADDR;
u8 reg_mask[] = {
/* regs to print: 0...8, 21,27,31 */
1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1,
};
for (i = 0; i < 32; i++) {
if (reg_mask[i]) {
miiphy_read (devname, phyAddr, i, &phyStatus);
printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
}
}
}
#endif
/********************************************************************/
static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
{
int ix;
/*
* Receive BDs init
*/
for (ix = 0; ix < FEC_RBD_NUM; ix++) {
fec->bdBase->rbd[ix].dataPointer =
(u32)&fec->bdBase->recv_frames[ix];
fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
fec->bdBase->rbd[ix].dataLength = 0;
}
/*
* have the last RBD to close the ring
*/
fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP;
fec->rbdIndex = 0;
/*
* Trasmit BDs init
*/
for (ix = 0; ix < FEC_TBD_NUM; ix++) {
fec->bdBase->tbd[ix].status = 0;
}
/*
* Have the last TBD to close the ring
*/
fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP;
/*
* Initialize some indices
*/
fec->tbdIndex = 0;
fec->usedTbdIndex = 0;
fec->cleanTbdNum = FEC_TBD_NUM;
return 0;
}
/********************************************************************/
static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd)
{
/*
* Reset buffer descriptor as empty
*/
if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
else
pRbd->status = FEC_RBD_EMPTY;
pRbd->dataLength = 0;
/*
* Increment BD count
*/
fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
/*
* Now, we have an empty RxBD, notify FEC
* Set Descriptor polling active
*/
out_be32(&fec->eth->r_des_active, 0x01000000);
}
/********************************************************************/
static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
{
volatile FEC_TBD *pUsedTbd;
#if (DEBUG & 0x1)
printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
fec->cleanTbdNum, fec->usedTbdIndex);
#endif
/*
* process all the consumed TBDs
*/
while (fec->cleanTbdNum < FEC_TBD_NUM) {
pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex];
if (pUsedTbd->status & FEC_TBD_READY) {
#if (DEBUG & 0x20)
printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex);
#endif
return;
}
/*
* clean this buffer descriptor
*/
if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
pUsedTbd->status = FEC_TBD_WRAP;
else
pUsedTbd->status = 0;
/*
* update some indeces for a correct handling of the TBD ring
*/
fec->cleanTbdNum++;
fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
}
}
/********************************************************************/
static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac)
{
u8 currByte; /* byte for which to compute the CRC */
int byte; /* loop - counter */
int bit; /* loop - counter */
u32 crc = 0xffffffff; /* initial value */
/*
* The algorithm used is the following:
* we loop on each of the six bytes of the provided address,
* and we compute the CRC by left-shifting the previous
* value by one position, so that each bit in the current
* byte of the address may contribute the calculation. If
* the latter and the MSB in the CRC are different, then
* the CRC value so computed is also ex-ored with the
* "polynomium generator". The current byte of the address
* is also shifted right by one bit at each iteration.
* This is because the CRC generatore in hardware is implemented
* as a shift-register with as many ex-ores as the radixes
* in the polynomium. This suggests that we represent the
* polynomiumm itself as a 32-bit constant.
*/
for (byte = 0; byte < 6; byte++) {
currByte = mac[byte];
for (bit = 0; bit < 8; bit++) {
if ((currByte & 0x01) ^ (crc & 0x01)) {
crc >>= 1;
crc = crc ^ 0xedb88320;
} else {
crc >>= 1;
}
currByte >>= 1;
}
}
crc = crc >> 26;
/*
* Set individual hash table register
*/
if (crc >= 32) {
out_be32(&fec->eth->iaddr1, (1 << (crc - 32)));
out_be32(&fec->eth->iaddr2, 0);
} else {
out_be32(&fec->eth->iaddr1, 0);
out_be32(&fec->eth->iaddr2, (1 << crc));
}
/*
* Set physical address
*/
out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) +
(mac[2] << 8) + mac[3]);
out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) +
0x8808);
}
/********************************************************************/
static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
{
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
#if (DEBUG & 0x1)
printf ("mpc512x_fec_init... Begin\n");
#endif
mpc512x_fec_set_hwaddr (fec, dev->enetaddr);
out_be32(&fec->eth->gaddr1, 0x00000000);
out_be32(&fec->eth->gaddr2, 0x00000000);
mpc512x_fec_init_phy (dev, bis);
/* Set interrupt mask register */
out_be32(&fec->eth->imask, 0x00000000);
/* Clear FEC-Lite interrupt event register(IEVENT) */
out_be32(&fec->eth->ievent, 0xffffffff);
/* Set transmit fifo watermark register(X_WMRK), default = 64 */
out_be32(&fec->eth->x_wmrk, 0x0);
/* Set Opcode/Pause Duration Register */
out_be32(&fec->eth->op_pause, 0x00010020);
/* Frame length=1522; MII mode */
out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24);
/* Half-duplex, heartbeat disabled */
out_be32(&fec->eth->x_cntrl, 0x00000000);
/* Enable MIB counters */
out_be32(&fec->eth->mib_control, 0x0);
/* Setup recv fifo start and buff size */
out_be32(&fec->eth->r_fstart, 0x500);
out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE);
/* Setup BD base addresses */
out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd);
out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd);
/* DMA Control */
out_be32(&fec->eth->dma_control, 0xc0000000);
/* Enable FEC */
setbits_be32(&fec->eth->ecntrl, 0x00000006);
/* Initilize addresses and status words of BDs */
mpc512x_fec_bd_init (fec);
/* Descriptor polling active */
out_be32(&fec->eth->r_des_active, 0x01000000);
#if (DEBUG & 0x1)
printf("mpc512x_fec_init... Done \n");
#endif
return 1;
}
/********************************************************************/
int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
{
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
int timeout = 1;
u16 phyStatus;
#if (DEBUG & 0x1)
printf ("mpc512x_fec_init_phy... Begin\n");
#endif
/*
* Clear FEC-Lite interrupt event register(IEVENT)
*/
out_be32(&fec->eth->ievent, 0xffffffff);
/*
* Set interrupt mask register
*/
out_be32(&fec->eth->imask, 0x00000000);
if (fec->xcv_type != SEVENWIRE) {
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
out_be32(&fec->eth->mii_speed,
(((gd->arch.ips_clk / 1000000) / 5) + 1) << 1);
/*
* Reset PHY, then delay 300ns
*/
miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
udelay (1000);
if (fec->xcv_type == MII10) {
/*
* Force 10Base-T, FDX operation
*/
#if (DEBUG & 0x2)
printf ("Forcing 10 Mbps ethernet link... ");
#endif
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
timeout = 20;
do { /* wait for link status to go down */
udelay (10000);
if ((timeout--) == 0) {
#if (DEBUG & 0x2)
printf ("hmmm, should not have waited...");
#endif
break;
}
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
#if (DEBUG & 0x2)
printf ("=");
#endif
} while ((phyStatus & 0x0004)); /* !link up */
timeout = 1000;
do { /* wait for link status to come back up */
udelay (10000);
if ((timeout--) == 0) {
printf ("failed. Link is down.\n");
break;
}
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
#if (DEBUG & 0x2)
printf ("+");
#endif
} while (!(phyStatus & 0x0004)); /* !link up */
#if (DEBUG & 0x2)
printf ("done.\n");
#endif
} else { /* MII100 */
/*
* Set the auto-negotiation advertisement register bits
*/
miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
/*
* Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
*/
miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
/*
* Wait for AN completion
*/
timeout = 2500;
do {
udelay (1000);
if ((timeout--) == 0) {
#if (DEBUG & 0x2)
printf ("PHY auto neg 0 failed...\n");
#endif
return -1;
}
if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) {
#if (DEBUG & 0x2)
printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
#endif
return -1;
}
} while (!(phyStatus & 0x0004));
#if (DEBUG & 0x2)
printf ("PHY auto neg complete! \n");
#endif
}
}
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
mpc512x_fec_phydump (dev->name);
#endif
#if (DEBUG & 0x1)
printf ("mpc512x_fec_init_phy... Done \n");
#endif
return 1;
}
/********************************************************************/
static void mpc512x_fec_halt (struct eth_device *dev)
{
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
int counter = 0xffff;
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
mpc512x_fec_phydump (dev->name);
#endif
/*
* mask FEC chip interrupts
*/
out_be32(&fec->eth->imask, 0);
/*
* issue graceful stop command to the FEC transmitter if necessary
*/
setbits_be32(&fec->eth->x_cntrl, 0x00000001);
/*
* wait for graceful stop to register
*/
while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000)))
;
/*
* Disable the Ethernet Controller
*/
clrbits_be32(&fec->eth->ecntrl, 0x00000002);
/*
* Issue a reset command to the FEC chip
*/
setbits_be32(&fec->eth->ecntrl, 0x1);
/*
* wait at least 16 clock cycles
*/
udelay (10);
#if (DEBUG & 0x3)
printf ("Ethernet task stopped\n");
#endif
}
/********************************************************************/
static int mpc512x_fec_send(struct eth_device *dev, void *eth_data,
int data_length)
{
/*
* This routine transmits one frame. This routine only accepts
* 6-byte Ethernet addresses.
*/
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
volatile FEC_TBD *pTbd;
#if (DEBUG & 0x20)
printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status);
#endif
/*
* Clear Tx BD ring at first
*/
mpc512x_fec_tbd_scrub (fec);
/*
* Check for valid length of data.
*/
if ((data_length > 1500) || (data_length <= 0)) {
return -1;
}
/*
* Check the number of vacant TxBDs.
*/
if (fec->cleanTbdNum < 1) {
#if (DEBUG & 0x20)
printf ("No available TxBDs ...\n");
#endif
return -1;
}
/*
* Get the first TxBD to send the mac header
*/
pTbd = &fec->bdBase->tbd[fec->tbdIndex];
pTbd->dataLength = data_length;
pTbd->dataPointer = (u32)eth_data;
pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
/* Activate transmit Buffer Descriptor polling */
out_be32(&fec->eth->x_des_active, 0x01000000);
#if (DEBUG & 0x8)
printf ( "+" );
#endif
fec->cleanTbdNum -= 1;
/*
* wait until frame is sent .
*/
while (pTbd->status & FEC_TBD_READY) {
udelay (10);
#if (DEBUG & 0x8)
printf ("TDB status = %04x\n", pTbd->status);
#endif
}
return 0;
}
/********************************************************************/
static int mpc512x_fec_recv (struct eth_device *dev)
{
/*
* This command pulls one frame from the card
*/
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex];
unsigned long ievent;
int frame_length = 0;
#if (DEBUG & 0x1)
printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex);
#endif
#if (DEBUG & 0x8)
printf( "-" );
#endif
/*
* Check if any critical events have happened
*/
ievent = in_be32(&fec->eth->ievent);
out_be32(&fec->eth->ievent, ievent);
if (ievent & 0x20060000) {
/* BABT, Rx/Tx FIFO errors */
mpc512x_fec_halt (dev);
mpc512x_fec_init (dev, NULL);
return 0;
}
if (ievent & 0x80000000) {
/* Heartbeat error */
setbits_be32(&fec->eth->x_cntrl, 0x00000001);
}
if (ievent & 0x10000000) {
/* Graceful stop complete */
if (in_be32(&fec->eth->x_cntrl) & 0x00000001) {
mpc512x_fec_halt (dev);
clrbits_be32(&fec->eth->x_cntrl, 0x00000001);;
mpc512x_fec_init (dev, NULL);
}
}
if (!(pRbd->status & FEC_RBD_EMPTY)) {
if (!(pRbd->status & FEC_RBD_ERR) &&
((pRbd->dataLength - 4) > 14)) {
/*
* Get buffer size
*/
if (pRbd->status & FEC_RBD_LAST)
frame_length = pRbd->dataLength - 4;
else
frame_length = pRbd->dataLength;
#if (DEBUG & 0x20)
{
int i;
printf ("recv data length 0x%08x data hdr: ",
pRbd->dataLength);
for (i = 0; i < 14; i++)
printf ("%x ", *((u8*)pRbd->dataPointer + i));
printf("\n");
}
#endif
/*
* Fill the buffer and pass it to upper layers
*/
memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer,
frame_length - rx_buff_idx);
rx_buff_idx = frame_length;
if (pRbd->status & FEC_RBD_LAST) {
net_process_received_packet((uchar *)rx_buff,
frame_length);
rx_buff_idx = 0;
}
}
/*
* Reset buffer descriptor as empty
*/
mpc512x_fec_rbd_clean (fec, pRbd);
}
/* Try to fill Buffer Descriptors */
out_be32(&fec->eth->r_des_active, 0x01000000);
return frame_length;
}
/********************************************************************/
int mpc512x_fec_initialize (bd_t * bis)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
mpc512x_fec_priv *fec;
struct eth_device *dev;
void * bd;
fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
dev = (struct eth_device *) malloc (sizeof(*dev));
memset (dev, 0, sizeof *dev);
fec->eth = &im->fec;
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
fec->xcv_type = MII10;
# endif
dev->priv = (void *)fec;
dev->iobase = (int)&im->fec;
dev->init = mpc512x_fec_init;
dev->halt = mpc512x_fec_halt;
dev->send = mpc512x_fec_send;
dev->recv = mpc512x_fec_recv;
sprintf (dev->name, "FEC");
eth_register (dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register (dev->name,
fec512x_miiphy_read, fec512x_miiphy_write);
#endif
/* Clean up space FEC's MIB and FIFO RAM ...*/
memset ((void *)&im->fec.mib, 0x00, sizeof(im->fec.mib));
memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo));
/*
* Malloc space for BDs (must be quad word-aligned)
* this pointer is lost, so cannot be freed
*/
bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f);
fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0);
memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f);
/*
* Set interrupt mask register
*/
out_be32(&fec->eth->imask, 0x00000000);
/*
* Clear FEC-Lite interrupt event register(IEVENT)
*/
out_be32(&fec->eth->ievent, 0xffffffff);
return 1;
}
/* MII-interface related functions */
/********************************************************************/
int fec512x_miiphy_read(const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
volatile fec512x_t *eth = &im->fec;
u32 reg; /* convenient holder for the PHY register */
u32 phy; /* convenient holder for the PHY */
int timeout = 0xffff;
/*
* reading from any PHY's register is done by properly
* programming the FEC's MII data register.
*/
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
out_be32(&eth->mii_data, FEC_MII_DATA_ST |
FEC_MII_DATA_OP_RD |
FEC_MII_DATA_TA |
phy | reg);
/*
* wait for the related interrupt
*/
while ((timeout--) && (!(in_be32(&eth->ievent) & 0x00800000)))
;
if (timeout == 0) {
#if (DEBUG & 0x2)
printf ("Read MDIO failed...\n");
#endif
return -1;
}
/*
* clear mii interrupt bit
*/
out_be32(&eth->ievent, 0x00800000);
/*
* it's now safe to read the PHY's register
*/
*retVal = (u16) in_be32(&eth->mii_data);
return 0;
}
/********************************************************************/
int fec512x_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
volatile fec512x_t *eth = &im->fec;
u32 reg; /* convenient holder for the PHY register */
u32 phy; /* convenient holder for the PHY */
int timeout = 0xffff;
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
out_be32(&eth->mii_data, FEC_MII_DATA_ST |
FEC_MII_DATA_OP_WR |
FEC_MII_DATA_TA |
phy | reg | data);
/*
* wait for the MII interrupt
*/
while ((timeout--) && (!(in_be32(&eth->ievent) & 0x00800000)))
;
if (timeout == 0) {
#if (DEBUG & 0x2)
printf ("Write MDIO failed...\n");
#endif
return -1;
}
/*
* clear MII interrupt bit
*/
out_be32(&eth->ievent, 0x00800000);
return 0;
}