upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
470 lines
11 KiB
470 lines
11 KiB
/*
|
|
* armboot - Startup Code for XScale
|
|
*
|
|
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
|
|
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
|
|
* Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
|
|
* Copyright (C) 2001 Alex Züpke <azu@sysgo.de>
|
|
* Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net>
|
|
* Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
|
|
* Copyright (C) 2003 Kai-Uwe Bloehm <kai-uwe.bloem@auerswald.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
.globl _start
|
|
_start: b reset
|
|
ldr pc, _undefined_instruction
|
|
ldr pc, _software_interrupt
|
|
ldr pc, _prefetch_abort
|
|
ldr pc, _data_abort
|
|
ldr pc, _not_used
|
|
ldr pc, _irq
|
|
ldr pc, _fiq
|
|
|
|
_undefined_instruction: .word undefined_instruction
|
|
_software_interrupt: .word software_interrupt
|
|
_prefetch_abort: .word prefetch_abort
|
|
_data_abort: .word data_abort
|
|
_not_used: .word not_used
|
|
_irq: .word irq
|
|
_fiq: .word fiq
|
|
|
|
.balignl 16,0xdeadbeef
|
|
|
|
|
|
/*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* do important init only if we don't start from memory!
|
|
* - relocate armboot to ram
|
|
* - setup stack
|
|
* - jump to second stage
|
|
*/
|
|
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE
|
|
|
|
.globl _armboot_start
|
|
_armboot_start:
|
|
.word _start
|
|
|
|
/*
|
|
* Note: _armboot_end_data and _armboot_end are defined
|
|
* by the (board-dependent) linker script.
|
|
* _armboot_end_data is the first usable FLASH address after armboot
|
|
*/
|
|
.globl _armboot_end_data
|
|
_armboot_end_data:
|
|
.word armboot_end_data
|
|
.globl _armboot_end
|
|
_armboot_end:
|
|
.word armboot_end
|
|
|
|
/*
|
|
* This is defined in the board specific linker script
|
|
*/
|
|
.globl _bss_start
|
|
_bss_start:
|
|
.word bss_start
|
|
|
|
.globl _bss_end
|
|
_bss_end:
|
|
.word bss_end
|
|
|
|
/*
|
|
* _armboot_real_end is the first usable RAM address behind armboot
|
|
* and the various stacks
|
|
*/
|
|
.globl _armboot_real_end
|
|
_armboot_real_end:
|
|
.word 0x0badc0de
|
|
|
|
/*
|
|
* We relocate uboot to this address (end of RAM - 128 KiB)
|
|
*/
|
|
.globl _uboot_reloc
|
|
_uboot_reloc:
|
|
.word TEXT_BASE
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl IRQ_STACK_START
|
|
IRQ_STACK_START:
|
|
.word 0x0badc0de
|
|
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl FIQ_STACK_START
|
|
FIQ_STACK_START:
|
|
.word 0x0badc0de
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* the actual reset code */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
reset:
|
|
mrs r0,cpsr /* set the cpu to SVC32 mode */
|
|
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
|
|
orr r0,r0,#0x13
|
|
msr cpsr,r0
|
|
|
|
bl cpu_init_crit /* we do sys-critical inits */
|
|
|
|
relocate: /* relocate U-Boot to RAM */
|
|
adr r0, _start /* r0 <- current position of code */
|
|
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
|
|
cmp r0, r1 /* don't reloc during debug */
|
|
beq stack_setup
|
|
|
|
ldr r2, _armboot_start
|
|
ldr r3, _armboot_end
|
|
sub r2, r3, r2 /* r2 <- size of armboot */
|
|
add r2, r0, r2 /* r2 <- source end address */
|
|
|
|
copy_loop:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end addreee [r2] */
|
|
ble copy_loop
|
|
|
|
/* Set up the stack */
|
|
|
|
stack_setup:
|
|
|
|
ldr r0, _uboot_reloc /* upper 128 KiB: relocated uboot */
|
|
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
|
|
/* FIXME: bdinfo should be here */
|
|
sub sp, r0, #12 /* leave 3 words for abort-stack */
|
|
|
|
clear_bss:
|
|
|
|
ldr r0, _bss_start /* find start of bss segment */
|
|
add r0, r0, #4 /* start at first byte of bss */
|
|
ldr r1, _bss_end /* stop here */
|
|
mov r2, #0x00000000 /* clear */
|
|
|
|
clbss_l:str r2, [r0] /* clear loop... */
|
|
add r0, r0, #4
|
|
cmp r0, r1
|
|
bne clbss_l
|
|
|
|
|
|
ldr pc, _start_armboot
|
|
|
|
_start_armboot: .word start_armboot
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* CPU_init_critical registers */
|
|
/* */
|
|
/* - setup important registers */
|
|
/* - setup memory timing */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
/* Interrupt-Controller base address */
|
|
IC_BASE: .word 0x40d00000
|
|
#define ICMR 0x04
|
|
|
|
/* Reset-Controller */
|
|
RST_BASE: .word 0x40f00030
|
|
#define RCSR 0x00
|
|
|
|
/* Operating System Timer */
|
|
OSTIMER_BASE: .word 0x40a00000
|
|
#define OSMR3 0x0C
|
|
#define OSCR 0x10
|
|
#define OWER 0x18
|
|
#define OIER 0x1C
|
|
|
|
/* Clock Manager Registers */
|
|
CC_BASE: .word 0x41300000
|
|
#define CCCR 0x00
|
|
cpuspeed: .word CFG_CPUSPEED
|
|
|
|
|
|
/* RS: ??? */
|
|
.macro CPWAIT
|
|
mrc p15,0,r0,c2,c0,0
|
|
mov r0,r0
|
|
sub pc,pc,#4
|
|
.endm
|
|
|
|
|
|
cpu_init_crit:
|
|
|
|
/* mask all IRQs */
|
|
ldr r0, IC_BASE
|
|
mov r1, #0x00
|
|
str r1, [r0, #ICMR]
|
|
|
|
#if defined(CFG_CPUSPEED)
|
|
|
|
/* set clock speed */
|
|
ldr r0, CC_BASE
|
|
ldr r1, cpuspeed
|
|
str r1, [r0, #CCCR]
|
|
mov r0, #2
|
|
mcr p14, 0, r0, c6, c0, 0
|
|
|
|
setspeed_done:
|
|
#endif
|
|
|
|
/*
|
|
* before relocating, we have to setup RAM timing
|
|
* because memory timing is board-dependend, you will
|
|
* find a memsetup.S in your board directory.
|
|
*/
|
|
mov ip, lr
|
|
bl memsetup
|
|
mov lr, ip
|
|
|
|
/* Memory interfaces are working. Disable MMU and enable I-cache. */
|
|
|
|
ldr r0, =0x2001 /* enable access to all coproc. */
|
|
mcr p15, 0, r0, c15, c1, 0
|
|
CPWAIT
|
|
|
|
mcr p15, 0, r0, c7, c10, 4 /* drain the write & fill buffers */
|
|
CPWAIT
|
|
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */
|
|
CPWAIT
|
|
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush instuction and data TLBs */
|
|
CPWAIT
|
|
|
|
/* Enable the Icache */
|
|
/*
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
orr r0, r0, #0x1800
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
CPWAIT
|
|
*/
|
|
mov pc, lr
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* Interrupt handling */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
/* IRQ stack frame */
|
|
|
|
#define S_FRAME_SIZE 72
|
|
|
|
#define S_OLD_R0 68
|
|
#define S_PSR 64
|
|
#define S_PC 60
|
|
#define S_LR 56
|
|
#define S_SP 52
|
|
|
|
#define S_IP 48
|
|
#define S_FP 44
|
|
#define S_R10 40
|
|
#define S_R9 36
|
|
#define S_R8 32
|
|
#define S_R7 28
|
|
#define S_R6 24
|
|
#define S_R5 20
|
|
#define S_R4 16
|
|
#define S_R3 12
|
|
#define S_R2 8
|
|
#define S_R1 4
|
|
#define S_R0 0
|
|
|
|
#define MODE_SVC 0x13
|
|
|
|
/* use bad_save_user_regs for abort/prefetch/undef/swi ... */
|
|
|
|
.macro bad_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
|
add r8, sp, #S_PC
|
|
|
|
ldr r2, _armboot_end
|
|
add r2, r2, #CONFIG_STACKSIZE
|
|
sub r2, r2, #8
|
|
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
|
|
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
|
|
|
|
add r5, sp, #S_SP
|
|
mov r1, lr
|
|
stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
|
|
mov r0, sp
|
|
.endm
|
|
|
|
|
|
/* use irq_save_user_regs / irq_restore_user_regs for */
|
|
/* IRQ/FIQ handling */
|
|
|
|
.macro irq_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
|
add r8, sp, #S_PC
|
|
stmdb r8, {sp, lr}^ /* Calling SP, LR */
|
|
str lr, [r8, #0] /* Save calling PC */
|
|
mrs r6, spsr
|
|
str r6, [r8, #4] /* Save CPSR */
|
|
str r0, [r8, #8] /* Save OLD_R0 */
|
|
mov r0, sp
|
|
.endm
|
|
|
|
.macro irq_restore_user_regs
|
|
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
|
|
mov r0, r0
|
|
ldr lr, [sp, #S_PC] @ Get PC
|
|
add sp, sp, #S_FRAME_SIZE
|
|
subs pc, lr, #4 @ return & move spsr_svc into cpsr
|
|
.endm
|
|
|
|
.macro get_bad_stack
|
|
ldr r13, _armboot_end @ setup our mode stack
|
|
add r13, r13, #CONFIG_STACKSIZE @ resides at top of normal stack
|
|
sub r13, r13, #8
|
|
|
|
str lr, [r13] @ save caller lr / spsr
|
|
mrs lr, spsr
|
|
str lr, [r13, #4]
|
|
|
|
mov r13, #MODE_SVC @ prepare SVC-Mode
|
|
msr spsr_c, r13
|
|
mov lr, pc
|
|
movs pc, lr
|
|
.endm
|
|
|
|
.macro get_irq_stack @ setup IRQ stack
|
|
ldr sp, IRQ_STACK_START
|
|
.endm
|
|
|
|
.macro get_fiq_stack @ setup FIQ stack
|
|
ldr sp, FIQ_STACK_START
|
|
.endm
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* exception handlers */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
.align 5
|
|
undefined_instruction:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_undefined_instruction
|
|
|
|
.align 5
|
|
software_interrupt:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_software_interrupt
|
|
|
|
.align 5
|
|
prefetch_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_prefetch_abort
|
|
|
|
.align 5
|
|
data_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_data_abort
|
|
|
|
.align 5
|
|
not_used:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_not_used
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
|
|
.align 5
|
|
irq:
|
|
get_irq_stack
|
|
irq_save_user_regs
|
|
bl do_irq
|
|
irq_restore_user_regs
|
|
|
|
.align 5
|
|
fiq:
|
|
get_fiq_stack
|
|
irq_save_user_regs /* someone ought to write a more */
|
|
bl do_fiq /* effiction fiq_save_user_regs */
|
|
irq_restore_user_regs
|
|
|
|
#else
|
|
|
|
.align 5
|
|
irq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_irq
|
|
|
|
.align 5
|
|
fiq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_fiq
|
|
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* Reset function: the PXA250 doesn't have a reset function, so we have to */
|
|
/* perform a watchdog timeout for a soft reset. */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
.align 5
|
|
.globl reset_cpu
|
|
|
|
/* FIXME: this code is PXA250 specific. How is this handled on */
|
|
/* other XScale processors? */
|
|
|
|
reset_cpu:
|
|
|
|
/* We set OWE:WME (watchdog enable) and wait until timeout happens */
|
|
|
|
ldr r0, OSTIMER_BASE
|
|
ldr r1, [r0, #OWER]
|
|
orr r1, r1, #0x0001 /* bit0: WME */
|
|
str r1, [r0, #OWER]
|
|
|
|
/* OS timer does only wrap every 1165 seconds, so we have to set */
|
|
/* the match register as well. */
|
|
|
|
ldr r1, [r0, #OSCR] /* read OS timer */
|
|
add r1, r1, #0x800 /* let OSMR3 match after */
|
|
add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */
|
|
str r1, [r0, #OSMR3]
|
|
|
|
reset_endless:
|
|
|
|
b reset_endless
|
|
|