upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/mpc8540eval/mpc8540eval.c

230 lines
6.1 KiB

/*
* (C) Copyright 2002,2003, Motorola Inc.
* Xianghua Xiao, (X.Xiao@motorola.com)
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_ddr_sdram.h>
#include <spd_sdram.h>
long int fixed_sdram (void);
int board_pre_init (void)
{
#if defined(CONFIG_PCI)
volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
pci->peer &= 0xffffffdf; /* disable master abort */
#endif
return 0;
}
int checkboard (void)
{
sys_info_t sysinfo;
get_sys_info (&sysinfo);
printf ("Board: Freescale MPC8540EVAL Board\n");
printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor[0] / 1000000);
printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
printf ("\tLBC: %lu MHz\n",
sysinfo.freqSystemBus / 1000000/(CONFIG_SYS_LBC_LCRR & 0x0f));
} else {
printf("\tLBC: unknown\n");
}
printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
return (0);
}
phys_size_t initdram (int board_type)
{
long dram_size = 0;
#if !defined(CONFIG_RAM_AS_FLASH)
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
sys_info_t sysinfo;
uint temp_lbcdll = 0;
#endif
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_DDR_DLL)
uint temp_ddrdll = 0;
/* Work around to stabilize DDR DLL */
temp_ddrdll = gur->ddrdllcr;
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
asm("sync;isync;msync");
#endif
#if defined(CONFIG_SPD_EEPROM)
dram_size = fsl_ddr_sdram();
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
#else
dram_size = fixed_sdram ();
#endif
#if defined(CONFIG_SYS_RAMBOOT)
return dram_size;
#endif
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
get_sys_info(&sysinfo);
/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) {
lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {
lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
udelay(200);
temp_lbcdll = gur->lbcdllcr;
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
asm("sync;isync;msync");
}
lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
lbc->br2 = CONFIG_SYS_BR2_PRELIM;
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
asm("sync");
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
asm("sync");
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
asm("sync");
#endif
#if defined(CONFIG_DDR_ECC)
{
/* Initialize all of memory for ECC, then
* enable errors */
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
/* Enable errors for ECC */
ddr->err_disable = 0x00000000;
asm("sync;isync;msync");
}
#endif
return dram_size;
}
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("SDRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("SDRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("SDRAM test passed.\n");
return 0;
}
#endif
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
long int fixed_sdram (void)
{
#ifndef CONFIG_SYS_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000000D;
ddr->err_sbe = 0x00ff0000;
#endif
asm("sync;isync;msync");
udelay(500);
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
#else
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
#endif
asm("sync; isync; msync");
udelay(500);
#endif
return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024);
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
int board_eth_init(bd_t *bis)
{
/*
* This board either has PCI NICs or uses the CPU's TSECs
* pci_eth_init() will return 0 if no NICs found, so in that case
* returning -1 will force cpu_eth_init() to be called.
*/
int num = pci_eth_init(bis);
return (num <= 0 ? -1 : num);
}