upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/hwmon/lm63.c

174 lines
3.7 KiB

/*
* (C) Copyright 2007-2008
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
* based on lm75.c by Bill Hunter
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* National LM63 Temperature Sensor
*/
#include <common.h>
#include <i2c.h>
#include <dtt.h>
#define DTT_I2C_DEV_CODE 0x4C /* National LM63 device */
#define DTT_READ_TEMP_RMT_MSB 0x01
#define DTT_CONFIG 0x03
#define DTT_READ_TEMP_RMT_LSB 0x10
#define DTT_TACHLIM_LSB 0x48
#define DTT_TACHLIM_MSB 0x49
#define DTT_FAN_CONFIG 0x4A
#define DTT_PWM_FREQ 0x4D
#define DTT_PWM_LOOKUP_BASE 0x50
struct pwm_lookup_entry {
u8 temp;
u8 pwm;
};
/*
* Device code
*/
int dtt_read(int sensor, int reg)
{
int dlen;
uchar data[2];
/*
* Calculate sensor address and register.
*/
sensor = DTT_I2C_DEV_CODE; /* address of lm63 is not adjustable */
dlen = 1;
/*
* Now try to read the register.
*/
if (i2c_read(sensor, reg, 1, data, dlen) != 0)
return -1;
return (int)data[0];
} /* dtt_read() */
int dtt_write(int sensor, int reg, int val)
{
int dlen;
uchar data[2];
/*
* Calculate sensor address and register.
*/
sensor = DTT_I2C_DEV_CODE; /* address of lm63 is not adjustable */
dlen = 1;
data[0] = (char)(val & 0xff);
/*
* Write value to register.
*/
if (i2c_write(sensor, reg, 1, data, dlen) != 0)
return 1;
return 0;
} /* dtt_write() */
static int _dtt_init(int sensor)
{
int i;
int val;
struct pwm_lookup_entry pwm_lookup[] = CONFIG_DTT_PWM_LOOKUPTABLE;
/*
* Set PWM Frequency to 2.5% resolution
*/
val = 20;
if (dtt_write(sensor, DTT_PWM_FREQ, val) != 0)
return 1;
/*
* Set Tachometer Limit
*/
val = CONFIG_DTT_TACH_LIMIT;
if (dtt_write(sensor, DTT_TACHLIM_LSB, val & 0xff) != 0)
return 1;
if (dtt_write(sensor, DTT_TACHLIM_MSB, (val >> 8) & 0xff) != 0)
return 1;
/*
* Setup PWM Lookup-Table
*/
for (i = 0; i < sizeof(pwm_lookup) / sizeof(struct pwm_lookup_entry);
i++) {
int address = DTT_PWM_LOOKUP_BASE + 2 * i;
val = pwm_lookup[i].temp;
if (dtt_write(sensor, address, val) != 0)
return 1;
val = pwm_lookup[i].pwm;
if (dtt_write(sensor, address + 1, val) != 0)
return 1;
}
/*
* Enable PWM Lookup-Table, PWM Clock 360 kHz, Tachometer Mode 2
*/
val = 0x02;
if (dtt_write(sensor, DTT_FAN_CONFIG, val) != 0)
return 1;
/*
* Enable Tach input
*/
val = dtt_read(sensor, DTT_CONFIG) | 0x04;
if (dtt_write(sensor, DTT_CONFIG, val) != 0)
return 1;
return 0;
}
int dtt_get_temp(int sensor)
{
s16 temp = (dtt_read(sensor, DTT_READ_TEMP_RMT_MSB) << 8)
| (dtt_read(sensor, DTT_READ_TEMP_RMT_LSB));
/* Ignore LSB for now, U-Boot only prints natural numbers */
return temp >> 8;
}
int dtt_init(void)
{
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
const char *const header = "DTT: ";
for (i = 0; i < sizeof(sensors); i++) {
if (_dtt_init(sensors[i]) != 0)
printf("%s%d FAILED INIT\n", header, i + 1);
else
printf("%s%d is %i C\n", header, i + 1,
dtt_get_temp(sensors[i]));
}
return 0;
}