upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
449 lines
11 KiB
449 lines
11 KiB
/*
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <malloc.h>
|
|
|
|
#include <gdsys_fpga.h>
|
|
|
|
#define CH7301_I2C_ADDR 0x75
|
|
|
|
#define ICS8N3QV01_I2C_ADDR 0x6E
|
|
#define ICS8N3QV01_FREF 114285000
|
|
#define ICS8N3QV01_FREF_LL 114285000LL
|
|
#define ICS8N3QV01_F_DEFAULT_0 156250000LL
|
|
#define ICS8N3QV01_F_DEFAULT_1 125000000LL
|
|
#define ICS8N3QV01_F_DEFAULT_2 100000000LL
|
|
#define ICS8N3QV01_F_DEFAULT_3 25175000LL
|
|
|
|
#define SIL1178_MASTER_I2C_ADDRESS 0x38
|
|
#define SIL1178_SLAVE_I2C_ADDRESS 0x39
|
|
|
|
#define PIXCLK_640_480_60 25180000
|
|
|
|
enum {
|
|
CH7301_CM = 0x1c, /* Clock Mode Register */
|
|
CH7301_IC = 0x1d, /* Input Clock Register */
|
|
CH7301_GPIO = 0x1e, /* GPIO Control Register */
|
|
CH7301_IDF = 0x1f, /* Input Data Format Register */
|
|
CH7301_CD = 0x20, /* Connection Detect Register */
|
|
CH7301_DC = 0x21, /* DAC Control Register */
|
|
CH7301_HPD = 0x23, /* Hot Plug Detection Register */
|
|
CH7301_TCTL = 0x31, /* DVI Control Input Register */
|
|
CH7301_TPCP = 0x33, /* DVI PLL Charge Pump Ctrl Register */
|
|
CH7301_TPD = 0x34, /* DVI PLL Divide Register */
|
|
CH7301_TPVT = 0x35, /* DVI PLL Supply Control Register */
|
|
CH7301_TPF = 0x36, /* DVI PLL Filter Register */
|
|
CH7301_TCT = 0x37, /* DVI Clock Test Register */
|
|
CH7301_TSTP = 0x48, /* Test Pattern Register */
|
|
CH7301_PM = 0x49, /* Power Management register */
|
|
CH7301_VID = 0x4a, /* Version ID Register */
|
|
CH7301_DID = 0x4b, /* Device ID Register */
|
|
CH7301_DSP = 0x56, /* DVI Sync polarity Register */
|
|
};
|
|
|
|
unsigned int base_width;
|
|
unsigned int base_height;
|
|
size_t bufsize;
|
|
u16 *buf;
|
|
|
|
unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1;
|
|
|
|
#ifdef CONFIG_SYS_CH7301
|
|
int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178)
|
|
static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data)
|
|
{
|
|
u16 val;
|
|
|
|
do {
|
|
FPGA_GET_REG(screen, extended_interrupt, &val);
|
|
} while (val & (1 << 12));
|
|
|
|
FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg | (data << 8));
|
|
FPGA_SET_REG(screen, i2c.write_mailbox, 0xc400 | (slave << 1));
|
|
}
|
|
|
|
static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg)
|
|
{
|
|
unsigned int ctr = 0;
|
|
u16 val;
|
|
|
|
do {
|
|
FPGA_GET_REG(screen, extended_interrupt, &val);
|
|
} while (val & (1 << 12));
|
|
|
|
FPGA_SET_REG(screen, extended_interrupt, 1 << 14);
|
|
FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg);
|
|
FPGA_SET_REG(screen, i2c.write_mailbox, 0xc000 | (slave << 1));
|
|
|
|
FPGA_GET_REG(screen, extended_interrupt, &val);
|
|
while (!(val & (1 << 14))) {
|
|
udelay(100000);
|
|
if (ctr++ > 5) {
|
|
printf("iic receive timeout\n");
|
|
break;
|
|
}
|
|
FPGA_GET_REG(screen, extended_interrupt, &val);
|
|
}
|
|
|
|
FPGA_GET_REG(screen, i2c.read_mailbox_ext, &val);
|
|
return val >> 8;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_MPC92469AC
|
|
static void mpc92469ac_calc_parameters(unsigned int fout,
|
|
unsigned int *post_div, unsigned int *feedback_div)
|
|
{
|
|
unsigned int n = *post_div;
|
|
unsigned int m = *feedback_div;
|
|
unsigned int a;
|
|
unsigned int b = 14745600 / 16;
|
|
|
|
if (fout < 50169600)
|
|
n = 8;
|
|
else if (fout < 100339199)
|
|
n = 4;
|
|
else if (fout < 200678399)
|
|
n = 2;
|
|
else
|
|
n = 1;
|
|
|
|
a = fout * n + (b / 2); /* add b/2 for proper rounding */
|
|
|
|
m = a / b;
|
|
|
|
*post_div = n;
|
|
*feedback_div = m;
|
|
}
|
|
|
|
static void mpc92469ac_set(unsigned screen, unsigned int fout)
|
|
{
|
|
unsigned int n;
|
|
unsigned int m;
|
|
unsigned int bitval = 0;
|
|
mpc92469ac_calc_parameters(fout, &n, &m);
|
|
|
|
switch (n) {
|
|
case 1:
|
|
bitval = 0x00;
|
|
break;
|
|
case 2:
|
|
bitval = 0x01;
|
|
break;
|
|
case 4:
|
|
bitval = 0x02;
|
|
break;
|
|
case 8:
|
|
bitval = 0x03;
|
|
break;
|
|
}
|
|
|
|
FPGA_SET_REG(screen, mpc3w_control, (bitval << 9) | m);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_ICS8N3QV01
|
|
|
|
static unsigned int ics8n3qv01_get_fout_calc(unsigned screen, unsigned index)
|
|
{
|
|
unsigned long long n;
|
|
unsigned long long mint;
|
|
unsigned long long mfrac;
|
|
u8 reg_a, reg_b, reg_c, reg_d, reg_f;
|
|
unsigned long long fout_calc;
|
|
|
|
if (index > 3)
|
|
return 0;
|
|
|
|
reg_a = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0 + index);
|
|
reg_b = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 4 + index);
|
|
reg_c = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 8 + index);
|
|
reg_d = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 12 + index);
|
|
reg_f = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20 + index);
|
|
|
|
mint = ((reg_a >> 1) & 0x1f) | (reg_f & 0x20);
|
|
mfrac = ((reg_a & 0x01) << 17) | (reg_b << 9) | (reg_c << 1)
|
|
| (reg_d >> 7);
|
|
n = reg_d & 0x7f;
|
|
|
|
fout_calc = (mint * ICS8N3QV01_FREF_LL
|
|
+ mfrac * ICS8N3QV01_FREF_LL / 262144LL
|
|
+ ICS8N3QV01_FREF_LL / 524288LL
|
|
+ n / 2)
|
|
/ n
|
|
* 1000000
|
|
/ (1000000 - 100);
|
|
|
|
return fout_calc;
|
|
}
|
|
|
|
|
|
static void ics8n3qv01_calc_parameters(unsigned int fout,
|
|
unsigned int *_mint, unsigned int *_mfrac,
|
|
unsigned int *_n)
|
|
{
|
|
unsigned int n;
|
|
unsigned int foutiic;
|
|
unsigned int fvcoiic;
|
|
unsigned int mint;
|
|
unsigned long long mfrac;
|
|
|
|
n = (2215000000U + fout / 2) / fout;
|
|
if ((n & 1) && (n > 5))
|
|
n -= 1;
|
|
|
|
foutiic = fout - (fout / 10000);
|
|
fvcoiic = foutiic * n;
|
|
|
|
mint = fvcoiic / 114285000;
|
|
if ((mint < 17) || (mint > 63))
|
|
printf("ics8n3qv01_calc_parameters: cannot determine mint\n");
|
|
|
|
mfrac = ((unsigned long long)fvcoiic % 114285000LL) * 262144LL
|
|
/ 114285000LL;
|
|
|
|
*_mint = mint;
|
|
*_mfrac = mfrac;
|
|
*_n = n;
|
|
}
|
|
|
|
static void ics8n3qv01_set(unsigned screen, unsigned int fout)
|
|
{
|
|
unsigned int n;
|
|
unsigned int mint;
|
|
unsigned int mfrac;
|
|
unsigned int fout_calc;
|
|
unsigned long long fout_prog;
|
|
long long off_ppm;
|
|
u8 reg0, reg4, reg8, reg12, reg18, reg20;
|
|
|
|
fout_calc = ics8n3qv01_get_fout_calc(screen, 1);
|
|
off_ppm = (fout_calc - ICS8N3QV01_F_DEFAULT_1) * 1000000
|
|
/ ICS8N3QV01_F_DEFAULT_1;
|
|
printf(" PLL is off by %lld ppm\n", off_ppm);
|
|
fout_prog = (unsigned long long)fout * (unsigned long long)fout_calc
|
|
/ ICS8N3QV01_F_DEFAULT_1;
|
|
ics8n3qv01_calc_parameters(fout_prog, &mint, &mfrac, &n);
|
|
|
|
reg0 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0) & 0xc0;
|
|
reg0 |= (mint & 0x1f) << 1;
|
|
reg0 |= (mfrac >> 17) & 0x01;
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 0, reg0);
|
|
|
|
reg4 = mfrac >> 9;
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 4, reg4);
|
|
|
|
reg8 = mfrac >> 1;
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 8, reg8);
|
|
|
|
reg12 = mfrac << 7;
|
|
reg12 |= n & 0x7f;
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 12, reg12);
|
|
|
|
reg18 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 18) & 0x03;
|
|
reg18 |= 0x20;
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 18, reg18);
|
|
|
|
reg20 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20) & 0x1f;
|
|
reg20 |= mint & (1 << 5);
|
|
fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 20, reg20);
|
|
}
|
|
#endif
|
|
|
|
static int osd_write_videomem(unsigned screen, unsigned offset,
|
|
u16 *data, size_t charcount)
|
|
{
|
|
unsigned int k;
|
|
|
|
for (k = 0; k < charcount; ++k) {
|
|
if (offset + k >= bufsize)
|
|
return -1;
|
|
FPGA_SET_REG(screen, videomem[offset + k], data[k]);
|
|
}
|
|
|
|
return charcount;
|
|
}
|
|
|
|
static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned screen;
|
|
|
|
for (screen = 0; screen <= max_osd_screen; ++screen) {
|
|
unsigned x;
|
|
unsigned y;
|
|
unsigned charcount;
|
|
unsigned len;
|
|
u8 color;
|
|
unsigned int k;
|
|
char *text;
|
|
int res;
|
|
|
|
if (argc < 5) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
x = simple_strtoul(argv[1], NULL, 16);
|
|
y = simple_strtoul(argv[2], NULL, 16);
|
|
color = simple_strtoul(argv[3], NULL, 16);
|
|
text = argv[4];
|
|
charcount = strlen(text);
|
|
len = (charcount > bufsize) ? bufsize : charcount;
|
|
|
|
for (k = 0; k < len; ++k)
|
|
buf[k] = (text[k] << 8) | color;
|
|
|
|
res = osd_write_videomem(screen, y * base_width + x, buf, len);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int osd_probe(unsigned screen)
|
|
{
|
|
u16 version;
|
|
u16 features;
|
|
u8 value;
|
|
#ifdef CONFIG_SYS_CH7301
|
|
int old_bus = i2c_get_bus_num();
|
|
#endif
|
|
|
|
FPGA_GET_REG(0, osd.version, &version);
|
|
FPGA_GET_REG(0, osd.features, &features);
|
|
|
|
base_width = ((features & 0x3f00) >> 8) + 1;
|
|
base_height = (features & 0x001f) + 1;
|
|
bufsize = base_width * base_height;
|
|
buf = malloc(sizeof(u16) * bufsize);
|
|
if (!buf)
|
|
return -1;
|
|
|
|
printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n",
|
|
screen, version/100, version%100, base_width, base_height);
|
|
|
|
#ifdef CONFIG_SYS_CH7301
|
|
i2c_set_bus_num(ch7301_i2c[screen]);
|
|
value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID);
|
|
if (value != 0x17) {
|
|
printf(" Probing CH7301 failed, DID %02x\n", value);
|
|
i2c_set_bus_num(old_bus);
|
|
return -1;
|
|
}
|
|
i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08);
|
|
i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16);
|
|
i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60);
|
|
i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09);
|
|
i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0);
|
|
i2c_set_bus_num(old_bus);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_MPC92469AC
|
|
mpc92469ac_set(screen, PIXCLK_640_480_60);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_ICS8N3QV01
|
|
ics8n3qv01_set(screen, PIXCLK_640_480_60);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_SIL1178
|
|
value = fpga_iic_read(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x02);
|
|
if (value != 0x06) {
|
|
printf(" Probing CH7301 SIL1178, DEV_IDL %02x\n", value);
|
|
return -1;
|
|
}
|
|
/* magic initialization sequence adapted from datasheet */
|
|
fpga_iic_write(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36);
|
|
fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37);
|
|
#endif
|
|
|
|
FPGA_SET_REG(screen, videocontrol, 0x0002);
|
|
FPGA_SET_REG(screen, osd.control, 0x0049);
|
|
|
|
FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1));
|
|
FPGA_SET_REG(screen, osd.x_pos, 0x007f);
|
|
FPGA_SET_REG(screen, osd.y_pos, 0x005f);
|
|
|
|
if (screen > max_osd_screen)
|
|
max_osd_screen = screen;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned screen;
|
|
|
|
for (screen = 0; screen <= max_osd_screen; ++screen) {
|
|
unsigned x;
|
|
unsigned y;
|
|
unsigned k;
|
|
u16 buffer[base_width];
|
|
char *rp;
|
|
u16 *wp = buffer;
|
|
unsigned count = (argc > 4) ?
|
|
simple_strtoul(argv[4], NULL, 16) : 1;
|
|
|
|
if ((argc < 4) || (strlen(argv[3]) % 4)) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
x = simple_strtoul(argv[1], NULL, 16);
|
|
y = simple_strtoul(argv[2], NULL, 16);
|
|
rp = argv[3];
|
|
|
|
|
|
while (*rp) {
|
|
char substr[5];
|
|
|
|
memcpy(substr, rp, 4);
|
|
substr[4] = 0;
|
|
*wp = simple_strtoul(substr, NULL, 16);
|
|
|
|
rp += 4;
|
|
wp++;
|
|
if (wp - buffer > base_width)
|
|
break;
|
|
}
|
|
|
|
for (k = 0; k < count; ++k) {
|
|
unsigned offset =
|
|
y * base_width + x + k * (wp - buffer);
|
|
osd_write_videomem(screen, offset, buffer,
|
|
wp - buffer);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
osdw, 5, 0, osd_write,
|
|
"write 16-bit hex encoded buffer to osd memory",
|
|
"pos_x pos_y buffer count\n"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
osdp, 5, 0, osd_print,
|
|
"write ASCII buffer to osd memory",
|
|
"pos_x pos_y color text\n"
|
|
);
|
|
|