upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
 
 
 
 
 
 
u-boot/drivers/3c589.c

519 lines
12 KiB

/*------------------------------------------------------------------------
. 3c589.c
. This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device.
.
. (C) Copyright 2002
. Sysgo Real-Time Solutions, GmbH <www.elinos.com>
. Rolf Offermanns <rof@sysgo.de>
.
. This program is free software; you can redistribute it and/or modify
. it under the terms of the GNU General Public License as published by
. the Free Software Foundation; either version 2 of the License, or
. (at your option) any later version.
.
. This program is distributed in the hope that it will be useful,
. but WITHOUT ANY WARRANTY; without even the implied warranty of
. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
. GNU General Public License for more details.
.
. You should have received a copy of the GNU General Public License
. along with this program; if not, write to the Free Software
. Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
.
----------------------------------------------------------------------------*/
#include <common.h>
#include <command.h>
#include <net.h>
#ifdef CONFIG_DRIVER_3C589
#include "3c589.h"
/* Use power-down feature of the chip */
#define POWER_DOWN 0
#define NO_AUTOPROBE
static const char version[] =
"Your ad here! :P\n";
#undef EL_DEBUG
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long int dword;
/*------------------------------------------------------------------------
.
. Configuration options, for the experienced user to change.
.
-------------------------------------------------------------------------*/
/*
. Wait time for memory to be free. This probably shouldn't be
. tuned that much, as waiting for this means nothing else happens
. in the system
*/
#define MEMORY_WAIT_TIME 16
#if (EL_DEBUG > 2 )
#define PRINTK3(args...) printf(args)
#else
#define PRINTK3(args...)
#endif
#if EL_DEBUG > 1
#define PRINTK2(args...) printf(args)
#else
#define PRINTK2(args...)
#endif
#ifdef EL_DEBUG
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif
#define outb(args...) mmio_outb(args)
#define mmio_outb(value, addr) (*((volatile byte *)(addr)) = value)
#define inb(args...) mmio_inb(args)
#define mmio_inb(addr) (*((volatile byte *)(addr)))
#define outw(args...) mmio_outw(args)
#define mmio_outw(value, addr) (*((volatile word *)(addr)) = value)
#define inw(args...) mmio_inw(args)
#define mmio_inw(addr) (*((volatile word *)(addr)))
#define outsw(args...) mmio_outsw(args)
#define mmio_outsw(r,b,l) ({ int __i; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
mmio_outw( *(__b2 + __i), r); \
} \
})
#define insw(args...) mmio_insw(args)
#define mmio_insw(r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = mmio_inw(r); \
mmio_inw(0); \
}; \
})
/*------------------------------------------------------------------------
.
. The internal workings of the driver. If you are changing anything
. here with the 3Com stuff, you should have the datasheet and know
. what you are doing.
.
-------------------------------------------------------------------------*/
#define EL_BASE_ADDR 0x20000000
/* Offsets from base I/O address. */
#define EL3_DATA 0x00
#define EL3_TIMER 0x0a
#define EL3_CMD 0x0e
#define EL3_STATUS 0x0e
#define EEPROM_READ 0x0080
#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD)
/* The top five bits written to EL3_CMD are a command, the lower
11 bits are the parameter, if applicable. */
enum c509cmd {
TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
StatsDisable = 22<<11, StopCoax = 23<<11,
};
enum c509status {
IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
};
/* The SetRxFilter command accepts the following classes: */
enum RxFilter {
RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
};
/* Register window 1 offsets, the window used in normal operation. */
#define TX_FIFO 0x00
#define RX_FIFO 0x00
#define RX_STATUS 0x08
#define TX_STATUS 0x0B
#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
/*
Read a word from the EEPROM using the regular EEPROM access register.
Assume that we are in register window zero.
*/
static word read_eeprom(dword ioaddr, int index)
{
int i;
outw(EEPROM_READ + index, ioaddr + 0xa);
/* Reading the eeprom takes 162 us */
for (i = 1620; i >= 0; i--)
if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
break;
return inw(ioaddr + 0xc);
}
static void el_get_mac_addr( unsigned char *mac_addr )
{
int i;
union
{
word w;
unsigned char b[2];
} wrd;
unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13;
GO_WINDOW(0);
VX_BUSY_WAIT;
for (i = 0; i < 3; i++)
{
wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i);
#ifdef __BIG_ENDIAN
mac_addr[2*i] = wrd.b[0];
mac_addr[2*i+1] = wrd.b[1];
#else
mac_addr[2*i] = wrd.b[1];
mac_addr[2*i+1] = wrd.b[0];
#endif
}
GO_WINDOW(old_window);
VX_BUSY_WAIT;
}
#if EL_DEBUG > 1
static void print_packet( byte * buf, int length )
{
int i;
int remainder;
int lines;
PRINTK2("Packet of length %d \n", length );
lines = length / 16;
remainder = length % 16;
for ( i = 0; i < lines ; i ++ ) {
int cur;
for ( cur = 0; cur < 8; cur ++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
PRINTK2("%02x%02x ", a, b );
}
PRINTK2("\n");
}
for ( i = 0; i < remainder/2 ; i++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
PRINTK2("%02x%02x ", a, b );
}
PRINTK2("\n");
}
#endif /* EL_DEBUG > 1 */
/**************************************************************************
ETH_RESET - Reset adapter
***************************************************************************/
static void el_reset(bd_t *bd)
{
/***********************************************************
Reset 3Com 595 card
*************************************************************/
/* QUICK HACK
* - adjust timing for 3c589
* - enable io for PCMCIA */
outw(0x0004, 0xa0000018);
udelay(100);
outw(0x0041, 0x28010000);
udelay(100);
/* issue global reset */
outw(GLOBAL_RESET, BASE + VX_COMMAND);
/* must wait for at least 1ms */
udelay(100000000);
/* set mac addr */
{
unsigned char *mac_addr = bd->bi_enetaddr;
int i;
el_get_mac_addr( mac_addr );
GO_WINDOW(2);
VX_BUSY_WAIT;
printf("3C589 MAC Addr.: ");
for (i = 0; i < 6; i++)
{
printf("%02x", mac_addr[i]);
outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i);
VX_BUSY_WAIT;
}
printf("\n\n");
}
/* set RX filter */
outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND);
VX_BUSY_WAIT;
/* set irq mask and read_zero */
outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
VX_BUSY_WAIT;
outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
VX_BUSY_WAIT;
/* enable TP Linkbeat */
GO_WINDOW(4);
VX_BUSY_WAIT;
outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
VX_BUSY_WAIT;
/*
* Attempt to get rid of any stray interrupts that occured during
* configuration. On the i386 this isn't possible because one may
* already be queued. However, a single stray interrupt is
* unimportant.
*/
outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
VX_BUSY_WAIT;
/* enable TX and RX */
outw( RX_ENABLE, BASE + VX_COMMAND );
VX_BUSY_WAIT;
outw( TX_ENABLE, BASE + VX_COMMAND );
VX_BUSY_WAIT;
/* print the diag. regs. */
PRINTK2("Diag. Regs\n");
PRINTK2("--> MEDIA_TYPE: %04x\n", inw(BASE + VX_W4_MEDIA_TYPE));
PRINTK2("--> NET_DIAG: %04x\n", inw(BASE + VX_W4_NET_DIAG));
PRINTK2("--> FIFO_DIAG: %04x\n", inw(BASE + VX_W4_FIFO_DIAG));
PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS));
PRINTK2("\n\n");
/* enter working mode */
GO_WINDOW(1);
VX_BUSY_WAIT;
/* wait for another 1ms */
udelay(100000000);
}
/*-----------------------------------------------------------------
.
. The driver can be entered at any of the following entry points.
.
.------------------------------------------------------------------ */
extern int eth_init(bd_t *bd);
extern void eth_halt(void);
extern int eth_rx(void);
extern int eth_send(volatile void *packet, int length);
/*
------------------------------------------------------------
.
. Internal routines
.
------------------------------------------------------------
*/
int eth_init(bd_t *bd)
{
el_reset(bd);
return 0;
}
void eth_halt() {
return;
}
#define EDEBUG 1
/**************************************************************************
ETH_POLL - Wait for a frame
***************************************************************************/
int eth_rx()
{
word status, rx_status, packet_size;
VX_BUSY_WAIT;
status = inw( BASE + VX_STATUS );
if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */
/* Packet waiting -> check RX_STATUS */
rx_status = inw( BASE + VX_W1_RX_STATUS );
if ( rx_status & ERR_RX )
{
/* error in packet -> discard */
PRINTK("[ERROR] Invalid packet -> discarding\n");
PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK);
PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1));
PRINTK("[ERROR] Invalid packet -> discarding\n");
outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND );
return 0;
}
/* correct pack. waiting in fifo */
packet_size = rx_status & RX_BYTES_MASK;
PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size);
{
volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1);
word *RcvBuffer = (word *)(NetRxPackets[0]);
int wcount = 0;
for (wcount = 0; wcount < (packet_size >> 1); wcount++)
{
*RcvBuffer++ = *(packet_start);
}
/* handle odd packets */
if ( packet_size & 1 )
{
*RcvBuffer++ = *(packet_start);
}
}
/* fifo should now be empty (besides the padding bytes) */
if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 )
{
PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n",
(((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK));
}
/* discard packet */
*((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK;
/* Pass Packets to upper Layer */
NetReceive(NetRxPackets[0], packet_size);
return packet_size;
}
/**************************************************************************
ETH_TRANSMIT - Transmit a frame
***************************************************************************/
static char padmap[] = {
0, 3, 2, 1};
int eth_send(volatile void *packet, int length) {
int pad;
int status;
volatile word *buf = (word *)packet;
int dummy = 0;
/* padding stuff */
pad = padmap[length & 3];
PRINTK("eth_send(), length: %d\n", length);
/* drop acknowledgements */
while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND);
outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND);
PRINTK("Bad status, resetting and reenabling transmitter\n");
}
outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS);
}
while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) {
/* no room in FIFO */
if (dummy == 0)
{
PRINTK("No room in FIFO, waiting...\n");
dummy++;
}
}
PRINTK(" ---> FIFO ready\n");
outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
/* Second dword meaningless */
outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
#if EL_DEBUG > 1
print_packet((byte *)buf, length);
#endif
/* write packet */
{
unsigned int i, totw;
totw = ((length + 1) >> 1);
PRINTK("Buffer: (totw = %d)\n", totw);
for (i = 0; i < totw; i++) {
outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
udelay(10);
}
if(totw & 1)
{ /* pad to double word length */
outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
udelay(10);
}
PRINTK("\n\n");
}
/* wait for Tx complete */
PRINTK("Waiting for Tx to complete...\n");
while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0)
{
udelay(10);
}
PRINTK(" ---> Tx completed, status = 0x%04x\n", status);
return length;
}
#endif /* CONFIG_DRIVER_3C589 */