upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
271 lines
6.5 KiB
271 lines
6.5 KiB
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _TEGRA_USB_H_
|
|
#define _TEGRA_USB_H_
|
|
|
|
|
|
/* USB Controller (USBx_CONTROLLER_) regs */
|
|
struct usb_ctlr {
|
|
/* 0x000 */
|
|
uint id;
|
|
uint reserved0;
|
|
uint host;
|
|
uint device;
|
|
|
|
/* 0x010 */
|
|
uint txbuf;
|
|
uint rxbuf;
|
|
uint reserved1[2];
|
|
|
|
/* 0x020 */
|
|
uint reserved2[56];
|
|
|
|
/* 0x100 */
|
|
u16 cap_length;
|
|
u16 hci_version;
|
|
uint hcs_params;
|
|
uint hcc_params;
|
|
uint reserved3[5];
|
|
|
|
/* 0x120 */
|
|
uint dci_version;
|
|
uint dcc_params;
|
|
uint reserved4[6];
|
|
|
|
/* 0x140 */
|
|
uint usb_cmd;
|
|
uint usb_sts;
|
|
uint usb_intr;
|
|
uint frindex;
|
|
|
|
/* 0x150 */
|
|
uint reserved5;
|
|
uint periodic_list_base;
|
|
uint async_list_addr;
|
|
uint async_tt_sts;
|
|
|
|
/* 0x160 */
|
|
uint burst_size;
|
|
uint tx_fill_tuning;
|
|
uint reserved6; /* is this port_sc1 on some controllers? */
|
|
uint icusb_ctrl;
|
|
|
|
/* 0x170 */
|
|
uint ulpi_viewport;
|
|
uint reserved7;
|
|
uint endpt_nak;
|
|
uint endpt_nak_enable;
|
|
|
|
/* 0x180 */
|
|
uint reserved;
|
|
uint port_sc1;
|
|
uint reserved8[6];
|
|
|
|
/* 0x1a0 */
|
|
uint reserved9;
|
|
uint otgsc;
|
|
uint usb_mode;
|
|
uint endpt_setup_stat;
|
|
|
|
/* 0x1b0 */
|
|
uint reserved10[20];
|
|
|
|
/* 0x200 */
|
|
uint reserved11[0x80];
|
|
|
|
/* 0x400 */
|
|
uint susp_ctrl;
|
|
uint phy_vbus_sensors;
|
|
uint phy_vbus_wakeup_id;
|
|
uint phy_alt_vbus_sys;
|
|
|
|
/* 0x410 */
|
|
uint usb1_legacy_ctrl;
|
|
uint reserved12[4];
|
|
|
|
/* 0x424 */
|
|
uint ulpi_timing_ctrl_0;
|
|
uint ulpi_timing_ctrl_1;
|
|
uint reserved13[53];
|
|
|
|
/* 0x500 */
|
|
uint reserved14[64 * 3];
|
|
|
|
/* 0x800 */
|
|
uint utmip_pll_cfg0;
|
|
uint utmip_pll_cfg1;
|
|
uint utmip_xcvr_cfg0;
|
|
uint utmip_bias_cfg0;
|
|
|
|
/* 0x810 */
|
|
uint utmip_hsrx_cfg0;
|
|
uint utmip_hsrx_cfg1;
|
|
uint utmip_fslsrx_cfg0;
|
|
uint utmip_fslsrx_cfg1;
|
|
|
|
/* 0x820 */
|
|
uint utmip_tx_cfg0;
|
|
uint utmip_misc_cfg0;
|
|
uint utmip_misc_cfg1;
|
|
uint utmip_debounce_cfg0;
|
|
|
|
/* 0x830 */
|
|
uint utmip_bat_chrg_cfg0;
|
|
uint utmip_spare_cfg0;
|
|
uint utmip_xcvr_cfg1;
|
|
uint utmip_bias_cfg1;
|
|
};
|
|
|
|
|
|
/* USB1_LEGACY_CTRL */
|
|
#define USB1_NO_LEGACY_MODE 1
|
|
|
|
#define VBUS_SENSE_CTL_SHIFT 1
|
|
#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
|
|
#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
|
|
#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
|
|
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
|
|
#define VBUS_SENSE_CTL_A_SESS_VLD 3
|
|
|
|
/* USB2_IF_ULPI_TIMING_CTRL_0 */
|
|
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
|
|
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
|
|
|
|
/* USB2_IF_ULPI_TIMING_CTRL_1 */
|
|
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
|
|
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
|
|
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
|
|
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
|
|
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
|
|
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
|
|
|
|
/* USBx_IF_USB_SUSP_CTRL_0 */
|
|
#define ULPI_PHY_ENB (1 << 13)
|
|
#define UTMIP_PHY_ENB (1 << 12)
|
|
#define UTMIP_RESET (1 << 11)
|
|
#define USB_PHY_CLK_VALID (1 << 7)
|
|
#define USB_SUSP_CLR (1 << 5)
|
|
|
|
/* USBx_UTMIP_MISC_CFG1 */
|
|
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
|
|
#define UTMIP_PLLU_STABLE_COUNT_MASK \
|
|
(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
|
|
#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
|
|
#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
|
|
(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
|
|
#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
|
|
|
|
/* USBx_UTMIP_PLL_CFG1_0 */
|
|
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
|
|
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
|
|
(0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
|
|
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
|
|
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
|
|
|
|
/* USBx_UTMIP_BIAS_CFG1_0 */
|
|
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
|
|
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
|
|
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
|
|
|
|
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
|
|
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
|
|
|
|
/* USBx_UTMIP_TX_CFG0_0 */
|
|
#define UTMIP_FS_PREAMBLE_J (1 << 19)
|
|
|
|
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
|
|
#define UTMIP_PD_CHRG 1
|
|
|
|
/* USBx_UTMIP_XCVR_CFG0_0 */
|
|
#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
|
|
|
|
/* USBx_UTMIP_SPARE_CFG0_0 */
|
|
#define FUSE_SETUP_SEL (1 << 3)
|
|
|
|
/* USBx_UTMIP_HSRX_CFG0_0 */
|
|
#define UTMIP_IDLE_WAIT_SHIFT 15
|
|
#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
|
|
#define UTMIP_ELASTIC_LIMIT_SHIFT 10
|
|
#define UTMIP_ELASTIC_LIMIT_MASK \
|
|
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
|
|
|
|
/* USBx_UTMIP_HSRX_CFG0_1 */
|
|
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
|
|
#define UTMIP_HS_SYNC_START_DLY_MASK \
|
|
(0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
|
|
|
|
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
|
|
#define IC_ENB1 (1 << 3)
|
|
|
|
/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
|
|
#define PTS_SHIFT 30
|
|
#define PTS_MASK (3U << PTS_SHIFT)
|
|
#define PTS_UTMI 0
|
|
#define PTS_RESERVED 1
|
|
#define PTS_ULPI 2
|
|
#define PTS_ICUSB_SER 3
|
|
|
|
#define STS (1 << 29)
|
|
#define WKOC (1 << 22)
|
|
#define WKDS (1 << 21)
|
|
#define WKCN (1 << 20)
|
|
|
|
/* USBx_UTMIP_XCVR_CFG0_0 */
|
|
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
|
|
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
|
|
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
|
|
|
|
/* USBx_UTMIP_XCVR_CFG1_0 */
|
|
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
|
|
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
|
|
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
|
|
|
|
/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
|
|
#define VBUS_VLD_STS (1 << 26)
|
|
|
|
|
|
/* Change the USB host port into host mode */
|
|
void usb_set_host_mode(void);
|
|
|
|
/* Setup USB on the board */
|
|
int board_usb_init(const void *blob);
|
|
|
|
/**
|
|
* Start up the given port number (ports are numbered from 0 on each board).
|
|
* This returns values for the appropriate hccr and hcor addresses to use for
|
|
* USB EHCI operations.
|
|
*
|
|
* @param portnum port number to start
|
|
* @param hccr returns start address of EHCI HCCR registers
|
|
* @param hcor returns start address of EHCI HCOR registers
|
|
* @return 0 if ok, -1 on error (generally invalid port number)
|
|
*/
|
|
int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
|
|
|
|
/**
|
|
* Stop the current port
|
|
*
|
|
* @return 0 if ok, -1 if no port was active
|
|
*/
|
|
int tegrausb_stop_port(int portnum);
|
|
|
|
#endif /* _TEGRA_USB_H_ */
|
|
|