upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
270 lines
6.7 KiB
270 lines
6.7 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016
|
|
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
|
|
*
|
|
* based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is
|
|
*
|
|
* Copyright 2010 eXMeritus, A Boeing Company
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <mapmem.h>
|
|
#include <asm/gpio.h>
|
|
|
|
struct ccsr_gpio {
|
|
u32 gpdir;
|
|
u32 gpodr;
|
|
u32 gpdat;
|
|
u32 gpier;
|
|
u32 gpimr;
|
|
u32 gpicr;
|
|
};
|
|
|
|
struct mpc8xxx_gpio_data {
|
|
/* The bank's register base in memory */
|
|
struct ccsr_gpio __iomem *base;
|
|
/* The address of the registers; used to identify the bank */
|
|
ulong addr;
|
|
/* The GPIO count of the bank */
|
|
uint gpio_count;
|
|
/* The GPDAT register cannot be used to determine the value of output
|
|
* pins on MPC8572/MPC8536, so we shadow it and use the shadowed value
|
|
* for output pins
|
|
*/
|
|
u32 dat_shadow;
|
|
ulong type;
|
|
};
|
|
|
|
enum {
|
|
MPC8XXX_GPIO_TYPE,
|
|
MPC5121_GPIO_TYPE,
|
|
};
|
|
|
|
inline u32 gpio_mask(uint gpio)
|
|
{
|
|
return (1U << (31 - (gpio)));
|
|
}
|
|
|
|
static inline u32 mpc8xxx_gpio_get_val(struct ccsr_gpio *base, u32 mask)
|
|
{
|
|
return in_be32(&base->gpdat) & mask;
|
|
}
|
|
|
|
static inline u32 mpc8xxx_gpio_get_dir(struct ccsr_gpio *base, u32 mask)
|
|
{
|
|
return in_be32(&base->gpdir) & mask;
|
|
}
|
|
|
|
static inline void mpc8xxx_gpio_set_in(struct ccsr_gpio *base, u32 gpios)
|
|
{
|
|
clrbits_be32(&base->gpdat, gpios);
|
|
/* GPDIR register 0 -> input */
|
|
clrbits_be32(&base->gpdir, gpios);
|
|
}
|
|
|
|
static inline void mpc8xxx_gpio_set_low(struct ccsr_gpio *base, u32 gpios)
|
|
{
|
|
clrbits_be32(&base->gpdat, gpios);
|
|
/* GPDIR register 1 -> output */
|
|
setbits_be32(&base->gpdir, gpios);
|
|
}
|
|
|
|
static inline void mpc8xxx_gpio_set_high(struct ccsr_gpio *base, u32 gpios)
|
|
{
|
|
setbits_be32(&base->gpdat, gpios);
|
|
/* GPDIR register 1 -> output */
|
|
setbits_be32(&base->gpdir, gpios);
|
|
}
|
|
|
|
static inline int mpc8xxx_gpio_open_drain_val(struct ccsr_gpio *base, u32 mask)
|
|
{
|
|
return in_be32(&base->gpodr) & mask;
|
|
}
|
|
|
|
static inline void mpc8xxx_gpio_open_drain_on(struct ccsr_gpio *base, u32
|
|
gpios)
|
|
{
|
|
/* GPODR register 1 -> open drain on */
|
|
setbits_be32(&base->gpodr, gpios);
|
|
}
|
|
|
|
static inline void mpc8xxx_gpio_open_drain_off(struct ccsr_gpio *base,
|
|
u32 gpios)
|
|
{
|
|
/* GPODR register 0 -> open drain off (actively driven) */
|
|
clrbits_be32(&base->gpodr, gpios);
|
|
}
|
|
|
|
static int mpc8xxx_gpio_direction_input(struct udevice *dev, uint gpio)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
mpc8xxx_gpio_set_in(data->base, gpio_mask(gpio));
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_gpio_set_value(struct udevice *dev, uint gpio, int value)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
if (value) {
|
|
data->dat_shadow |= gpio_mask(gpio);
|
|
mpc8xxx_gpio_set_high(data->base, gpio_mask(gpio));
|
|
} else {
|
|
data->dat_shadow &= ~gpio_mask(gpio);
|
|
mpc8xxx_gpio_set_low(data->base, gpio_mask(gpio));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_gpio_direction_output(struct udevice *dev, uint gpio,
|
|
int value)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
/* GPIO 28..31 are input only on MPC5121 */
|
|
if (data->type == MPC5121_GPIO_TYPE && gpio >= 28)
|
|
return -EINVAL;
|
|
|
|
return mpc8xxx_gpio_set_value(dev, gpio, value);
|
|
}
|
|
|
|
static int mpc8xxx_gpio_get_value(struct udevice *dev, uint gpio)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
if (!!mpc8xxx_gpio_get_dir(data->base, gpio_mask(gpio))) {
|
|
/* Output -> use shadowed value */
|
|
return !!(data->dat_shadow & gpio_mask(gpio));
|
|
}
|
|
|
|
/* Input -> read value from GPDAT register */
|
|
return !!mpc8xxx_gpio_get_val(data->base, gpio_mask(gpio));
|
|
}
|
|
|
|
static int mpc8xxx_gpio_get_open_drain(struct udevice *dev, uint gpio)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
return !!mpc8xxx_gpio_open_drain_val(data->base, gpio_mask(gpio));
|
|
}
|
|
|
|
static int mpc8xxx_gpio_set_open_drain(struct udevice *dev, uint gpio,
|
|
int value)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
|
|
if (value)
|
|
mpc8xxx_gpio_open_drain_on(data->base, gpio_mask(gpio));
|
|
else
|
|
mpc8xxx_gpio_open_drain_off(data->base, gpio_mask(gpio));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio)
|
|
{
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
int dir;
|
|
|
|
dir = !!mpc8xxx_gpio_get_dir(data->base, gpio_mask(gpio));
|
|
return dir ? GPIOF_OUTPUT : GPIOF_INPUT;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static int mpc8xxx_gpio_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
|
|
fdt_addr_t addr;
|
|
u32 reg[2];
|
|
|
|
dev_read_u32_array(dev, "reg", reg, 2);
|
|
addr = dev_translate_address(dev, reg);
|
|
|
|
plat->addr = addr;
|
|
plat->size = reg[1];
|
|
plat->ngpios = dev_read_u32_default(dev, "ngpios", 32);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mpc8xxx_gpio_platdata_to_priv(struct udevice *dev)
|
|
{
|
|
struct mpc8xxx_gpio_data *priv = dev_get_priv(dev);
|
|
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
|
|
unsigned long size = plat->size;
|
|
ulong driver_data = dev_get_driver_data(dev);
|
|
|
|
if (size == 0)
|
|
size = 0x100;
|
|
|
|
priv->addr = plat->addr;
|
|
priv->base = map_sysmem(plat->addr, size);
|
|
|
|
if (!priv->base)
|
|
return -ENOMEM;
|
|
|
|
priv->gpio_count = plat->ngpios;
|
|
priv->dat_shadow = 0;
|
|
|
|
priv->type = driver_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
|
|
char name[32], *str;
|
|
|
|
mpc8xxx_gpio_platdata_to_priv(dev);
|
|
|
|
snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
|
|
str = strdup(name);
|
|
|
|
if (!str)
|
|
return -ENOMEM;
|
|
|
|
uc_priv->bank_name = str;
|
|
uc_priv->gpio_count = data->gpio_count;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops gpio_mpc8xxx_ops = {
|
|
.direction_input = mpc8xxx_gpio_direction_input,
|
|
.direction_output = mpc8xxx_gpio_direction_output,
|
|
.get_value = mpc8xxx_gpio_get_value,
|
|
.set_value = mpc8xxx_gpio_set_value,
|
|
.get_open_drain = mpc8xxx_gpio_get_open_drain,
|
|
.set_open_drain = mpc8xxx_gpio_set_open_drain,
|
|
.get_function = mpc8xxx_gpio_get_function,
|
|
};
|
|
|
|
static const struct udevice_id mpc8xxx_gpio_ids[] = {
|
|
{ .compatible = "fsl,pq3-gpio", .data = MPC8XXX_GPIO_TYPE },
|
|
{ .compatible = "fsl,mpc8308-gpio", .data = MPC8XXX_GPIO_TYPE },
|
|
{ .compatible = "fsl,mpc8349-gpio", .data = MPC8XXX_GPIO_TYPE },
|
|
{ .compatible = "fsl,mpc8572-gpio", .data = MPC8XXX_GPIO_TYPE},
|
|
{ .compatible = "fsl,mpc8610-gpio", .data = MPC8XXX_GPIO_TYPE},
|
|
{ .compatible = "fsl,mpc5121-gpio", .data = MPC5121_GPIO_TYPE, },
|
|
{ .compatible = "fsl,qoriq-gpio", .data = MPC8XXX_GPIO_TYPE },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(gpio_mpc8xxx) = {
|
|
.name = "gpio_mpc8xxx",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &gpio_mpc8xxx_ops,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.ofdata_to_platdata = mpc8xxx_gpio_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mpc8xxx_gpio_plat),
|
|
.of_match = mpc8xxx_gpio_ids,
|
|
#endif
|
|
.probe = mpc8xxx_gpio_probe,
|
|
.priv_auto_alloc_size = sizeof(struct mpc8xxx_gpio_data),
|
|
};
|
|
|