upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
954 lines
21 KiB
954 lines
21 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Generic PHY Management code
|
|
*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* author Andy Fleming
|
|
*
|
|
* Based loosely off of Linux's PHY Lib
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <console.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <command.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/compiler.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Generic PHY support and helper functions */
|
|
|
|
/**
|
|
* genphy_config_advert - sanitize and advertise auto-negotiation parameters
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Writes MII_ADVERTISE with the appropriate values,
|
|
* after sanitizing the values to make sure we only advertise
|
|
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement
|
|
* hasn't changed, and > 0 if it has changed.
|
|
*/
|
|
static int genphy_config_advert(struct phy_device *phydev)
|
|
{
|
|
u32 advertise;
|
|
int oldadv, adv, bmsr;
|
|
int err, changed = 0;
|
|
|
|
/* Only allow advertising what this PHY supports */
|
|
phydev->advertising &= phydev->supported;
|
|
advertise = phydev->advertising;
|
|
|
|
/* Setup standard advertisement */
|
|
adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
|
|
oldadv = adv;
|
|
|
|
if (adv < 0)
|
|
return adv;
|
|
|
|
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
|
|
ADVERTISE_PAUSE_ASYM);
|
|
if (advertise & ADVERTISED_10baseT_Half)
|
|
adv |= ADVERTISE_10HALF;
|
|
if (advertise & ADVERTISED_10baseT_Full)
|
|
adv |= ADVERTISE_10FULL;
|
|
if (advertise & ADVERTISED_100baseT_Half)
|
|
adv |= ADVERTISE_100HALF;
|
|
if (advertise & ADVERTISED_100baseT_Full)
|
|
adv |= ADVERTISE_100FULL;
|
|
if (advertise & ADVERTISED_Pause)
|
|
adv |= ADVERTISE_PAUSE_CAP;
|
|
if (advertise & ADVERTISED_Asym_Pause)
|
|
adv |= ADVERTISE_PAUSE_ASYM;
|
|
if (advertise & ADVERTISED_1000baseX_Half)
|
|
adv |= ADVERTISE_1000XHALF;
|
|
if (advertise & ADVERTISED_1000baseX_Full)
|
|
adv |= ADVERTISE_1000XFULL;
|
|
|
|
if (adv != oldadv) {
|
|
err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
changed = 1;
|
|
}
|
|
|
|
bmsr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
if (bmsr < 0)
|
|
return bmsr;
|
|
|
|
/* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
|
|
* 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
|
|
* logical 1.
|
|
*/
|
|
if (!(bmsr & BMSR_ESTATEN))
|
|
return changed;
|
|
|
|
/* Configure gigabit if it's supported */
|
|
adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
|
|
oldadv = adv;
|
|
|
|
if (adv < 0)
|
|
return adv;
|
|
|
|
adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
|
|
|
|
if (phydev->supported & (SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full)) {
|
|
if (advertise & SUPPORTED_1000baseT_Half)
|
|
adv |= ADVERTISE_1000HALF;
|
|
if (advertise & SUPPORTED_1000baseT_Full)
|
|
adv |= ADVERTISE_1000FULL;
|
|
}
|
|
|
|
if (adv != oldadv)
|
|
changed = 1;
|
|
|
|
err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, adv);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return changed;
|
|
}
|
|
|
|
/**
|
|
* genphy_setup_forced - configures/forces speed/duplex from @phydev
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Configures MII_BMCR to force speed/duplex
|
|
* to the values in phydev. Assumes that the values are valid.
|
|
*/
|
|
static int genphy_setup_forced(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
int ctl = BMCR_ANRESTART;
|
|
|
|
phydev->pause = 0;
|
|
phydev->asym_pause = 0;
|
|
|
|
if (phydev->speed == SPEED_1000)
|
|
ctl |= BMCR_SPEED1000;
|
|
else if (phydev->speed == SPEED_100)
|
|
ctl |= BMCR_SPEED100;
|
|
|
|
if (phydev->duplex == DUPLEX_FULL)
|
|
ctl |= BMCR_FULLDPLX;
|
|
|
|
err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* genphy_restart_aneg - Enable and Restart Autonegotiation
|
|
* @phydev: target phy_device struct
|
|
*/
|
|
int genphy_restart_aneg(struct phy_device *phydev)
|
|
{
|
|
int ctl;
|
|
|
|
ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
|
|
if (ctl < 0)
|
|
return ctl;
|
|
|
|
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
|
|
|
|
/* Don't isolate the PHY if we're negotiating */
|
|
ctl &= ~(BMCR_ISOLATE);
|
|
|
|
ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
|
|
|
|
return ctl;
|
|
}
|
|
|
|
/**
|
|
* genphy_config_aneg - restart auto-negotiation or write BMCR
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: If auto-negotiation is enabled, we configure the
|
|
* advertising, and then restart auto-negotiation. If it is not
|
|
* enabled, then we write the BMCR.
|
|
*/
|
|
int genphy_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int result;
|
|
|
|
if (phydev->autoneg != AUTONEG_ENABLE)
|
|
return genphy_setup_forced(phydev);
|
|
|
|
result = genphy_config_advert(phydev);
|
|
|
|
if (result < 0) /* error */
|
|
return result;
|
|
|
|
if (result == 0) {
|
|
/*
|
|
* Advertisment hasn't changed, but maybe aneg was never on to
|
|
* begin with? Or maybe phy was isolated?
|
|
*/
|
|
int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
|
|
if (ctl < 0)
|
|
return ctl;
|
|
|
|
if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
|
|
result = 1; /* do restart aneg */
|
|
}
|
|
|
|
/*
|
|
* Only restart aneg if we are advertising something different
|
|
* than we were before.
|
|
*/
|
|
if (result > 0)
|
|
result = genphy_restart_aneg(phydev);
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* genphy_update_link - update link status in @phydev
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Update the value in phydev->link to reflect the
|
|
* current link value. In order to do this, we need to read
|
|
* the status register twice, keeping the second value.
|
|
*/
|
|
int genphy_update_link(struct phy_device *phydev)
|
|
{
|
|
unsigned int mii_reg;
|
|
|
|
/*
|
|
* Wait if the link is up, and autonegotiation is in progress
|
|
* (ie - we're capable and it's not done)
|
|
*/
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
|
|
/*
|
|
* If we already saw the link up, and it hasn't gone down, then
|
|
* we don't need to wait for autoneg again
|
|
*/
|
|
if (phydev->link && mii_reg & BMSR_LSTATUS)
|
|
return 0;
|
|
|
|
if ((phydev->autoneg == AUTONEG_ENABLE) &&
|
|
!(mii_reg & BMSR_ANEGCOMPLETE)) {
|
|
int i = 0;
|
|
|
|
printf("%s Waiting for PHY auto negotiation to complete",
|
|
phydev->dev->name);
|
|
while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
|
|
/*
|
|
* Timeout reached ?
|
|
*/
|
|
if (i > PHY_ANEG_TIMEOUT) {
|
|
printf(" TIMEOUT !\n");
|
|
phydev->link = 0;
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (ctrlc()) {
|
|
puts("user interrupt!\n");
|
|
phydev->link = 0;
|
|
return -EINTR;
|
|
}
|
|
|
|
if ((i++ % 500) == 0)
|
|
printf(".");
|
|
|
|
udelay(1000); /* 1 ms */
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
}
|
|
printf(" done\n");
|
|
phydev->link = 1;
|
|
} else {
|
|
/* Read the link a second time to clear the latched state */
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
|
|
if (mii_reg & BMSR_LSTATUS)
|
|
phydev->link = 1;
|
|
else
|
|
phydev->link = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Generic function which updates the speed and duplex. If
|
|
* autonegotiation is enabled, it uses the AND of the link
|
|
* partner's advertised capabilities and our advertised
|
|
* capabilities. If autonegotiation is disabled, we use the
|
|
* appropriate bits in the control register.
|
|
*
|
|
* Stolen from Linux's mii.c and phy_device.c
|
|
*/
|
|
int genphy_parse_link(struct phy_device *phydev)
|
|
{
|
|
int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
|
|
/* We're using autonegotiation */
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
u32 lpa = 0;
|
|
int gblpa = 0;
|
|
u32 estatus = 0;
|
|
|
|
/* Check for gigabit capability */
|
|
if (phydev->supported & (SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_1000baseT_Half)) {
|
|
/* We want a list of states supported by
|
|
* both PHYs in the link
|
|
*/
|
|
gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000);
|
|
if (gblpa < 0) {
|
|
debug("Could not read MII_STAT1000. ");
|
|
debug("Ignoring gigabit capability\n");
|
|
gblpa = 0;
|
|
}
|
|
gblpa &= phy_read(phydev,
|
|
MDIO_DEVAD_NONE, MII_CTRL1000) << 2;
|
|
}
|
|
|
|
/* Set the baseline so we only have to set them
|
|
* if they're different
|
|
*/
|
|
phydev->speed = SPEED_10;
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
/* Check the gigabit fields */
|
|
if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
|
|
phydev->speed = SPEED_1000;
|
|
|
|
if (gblpa & PHY_1000BTSR_1000FD)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
|
|
/* We're done! */
|
|
return 0;
|
|
}
|
|
|
|
lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
|
|
lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
|
|
|
|
if (lpa & (LPA_100FULL | LPA_100HALF)) {
|
|
phydev->speed = SPEED_100;
|
|
|
|
if (lpa & LPA_100FULL)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
|
|
} else if (lpa & LPA_10FULL) {
|
|
phydev->duplex = DUPLEX_FULL;
|
|
}
|
|
|
|
/*
|
|
* Extended status may indicate that the PHY supports
|
|
* 1000BASE-T/X even though the 1000BASE-T registers
|
|
* are missing. In this case we can't tell whether the
|
|
* peer also supports it, so we only check extended
|
|
* status if the 1000BASE-T registers are actually
|
|
* missing.
|
|
*/
|
|
if ((mii_reg & BMSR_ESTATEN) && !(mii_reg & BMSR_ERCAP))
|
|
estatus = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MII_ESTATUS);
|
|
|
|
if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_XHALF |
|
|
ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) {
|
|
phydev->speed = SPEED_1000;
|
|
if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_TFULL))
|
|
phydev->duplex = DUPLEX_FULL;
|
|
}
|
|
|
|
} else {
|
|
u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
|
|
phydev->speed = SPEED_10;
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
if (bmcr & BMCR_FULLDPLX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
|
|
if (bmcr & BMCR_SPEED1000)
|
|
phydev->speed = SPEED_1000;
|
|
else if (bmcr & BMCR_SPEED100)
|
|
phydev->speed = SPEED_100;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int genphy_config(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
u32 features;
|
|
|
|
features = (SUPPORTED_TP | SUPPORTED_MII
|
|
| SUPPORTED_AUI | SUPPORTED_FIBRE |
|
|
SUPPORTED_BNC);
|
|
|
|
/* Do we support autonegotiation? */
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
|
|
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & BMSR_ANEGCAPABLE)
|
|
features |= SUPPORTED_Autoneg;
|
|
|
|
if (val & BMSR_100FULL)
|
|
features |= SUPPORTED_100baseT_Full;
|
|
if (val & BMSR_100HALF)
|
|
features |= SUPPORTED_100baseT_Half;
|
|
if (val & BMSR_10FULL)
|
|
features |= SUPPORTED_10baseT_Full;
|
|
if (val & BMSR_10HALF)
|
|
features |= SUPPORTED_10baseT_Half;
|
|
|
|
if (val & BMSR_ESTATEN) {
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS);
|
|
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & ESTATUS_1000_TFULL)
|
|
features |= SUPPORTED_1000baseT_Full;
|
|
if (val & ESTATUS_1000_THALF)
|
|
features |= SUPPORTED_1000baseT_Half;
|
|
if (val & ESTATUS_1000_XFULL)
|
|
features |= SUPPORTED_1000baseX_Full;
|
|
if (val & ESTATUS_1000_XHALF)
|
|
features |= SUPPORTED_1000baseX_Half;
|
|
}
|
|
|
|
phydev->supported &= features;
|
|
phydev->advertising &= features;
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int genphy_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_parse_link(phydev);
|
|
}
|
|
|
|
int genphy_shutdown(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver genphy_driver = {
|
|
.uid = 0xffffffff,
|
|
.mask = 0xffffffff,
|
|
.name = "Generic PHY",
|
|
.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
|
|
SUPPORTED_AUI | SUPPORTED_FIBRE |
|
|
SUPPORTED_BNC,
|
|
.config = genphy_config,
|
|
.startup = genphy_startup,
|
|
.shutdown = genphy_shutdown,
|
|
};
|
|
|
|
static LIST_HEAD(phy_drivers);
|
|
|
|
int phy_init(void)
|
|
{
|
|
#ifdef CONFIG_B53_SWITCH
|
|
phy_b53_init();
|
|
#endif
|
|
#ifdef CONFIG_MV88E61XX_SWITCH
|
|
phy_mv88e61xx_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_AQUANTIA
|
|
phy_aquantia_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_ATHEROS
|
|
phy_atheros_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_BROADCOM
|
|
phy_broadcom_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_CORTINA
|
|
phy_cortina_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_DAVICOM
|
|
phy_davicom_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_ET1011C
|
|
phy_et1011c_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_LXT
|
|
phy_lxt_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_MARVELL
|
|
phy_marvell_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_MICREL_KSZ8XXX
|
|
phy_micrel_ksz8xxx_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_MICREL_KSZ90X1
|
|
phy_micrel_ksz90x1_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_MESON_GXL
|
|
phy_meson_gxl_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_NATSEMI
|
|
phy_natsemi_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_REALTEK
|
|
phy_realtek_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_SMSC
|
|
phy_smsc_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_TERANETICS
|
|
phy_teranetics_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_TI
|
|
phy_ti_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_VITESSE
|
|
phy_vitesse_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_XILINX
|
|
phy_xilinx_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_MSCC
|
|
phy_mscc_init();
|
|
#endif
|
|
#ifdef CONFIG_PHY_FIXED
|
|
phy_fixed_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int phy_register(struct phy_driver *drv)
|
|
{
|
|
INIT_LIST_HEAD(&drv->list);
|
|
list_add_tail(&drv->list, &phy_drivers);
|
|
|
|
#ifdef CONFIG_NEEDS_MANUAL_RELOC
|
|
if (drv->probe)
|
|
drv->probe += gd->reloc_off;
|
|
if (drv->config)
|
|
drv->config += gd->reloc_off;
|
|
if (drv->startup)
|
|
drv->startup += gd->reloc_off;
|
|
if (drv->shutdown)
|
|
drv->shutdown += gd->reloc_off;
|
|
if (drv->readext)
|
|
drv->readext += gd->reloc_off;
|
|
if (drv->writeext)
|
|
drv->writeext += gd->reloc_off;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int phy_set_supported(struct phy_device *phydev, u32 max_speed)
|
|
{
|
|
/* The default values for phydev->supported are provided by the PHY
|
|
* driver "features" member, we want to reset to sane defaults first
|
|
* before supporting higher speeds.
|
|
*/
|
|
phydev->supported &= PHY_DEFAULT_FEATURES;
|
|
|
|
switch (max_speed) {
|
|
default:
|
|
return -ENOTSUPP;
|
|
case SPEED_1000:
|
|
phydev->supported |= PHY_1000BT_FEATURES;
|
|
/* fall through */
|
|
case SPEED_100:
|
|
phydev->supported |= PHY_100BT_FEATURES;
|
|
/* fall through */
|
|
case SPEED_10:
|
|
phydev->supported |= PHY_10BT_FEATURES;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_probe(struct phy_device *phydev)
|
|
{
|
|
int err = 0;
|
|
|
|
phydev->advertising = phydev->drv->features;
|
|
phydev->supported = phydev->drv->features;
|
|
|
|
phydev->mmds = phydev->drv->mmds;
|
|
|
|
if (phydev->drv->probe)
|
|
err = phydev->drv->probe(phydev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct phy_driver *generic_for_interface(phy_interface_t interface)
|
|
{
|
|
#ifdef CONFIG_PHYLIB_10G
|
|
if (is_10g_interface(interface))
|
|
return &gen10g_driver;
|
|
#endif
|
|
|
|
return &genphy_driver;
|
|
}
|
|
|
|
static struct phy_driver *get_phy_driver(struct phy_device *phydev,
|
|
phy_interface_t interface)
|
|
{
|
|
struct list_head *entry;
|
|
int phy_id = phydev->phy_id;
|
|
struct phy_driver *drv = NULL;
|
|
|
|
list_for_each(entry, &phy_drivers) {
|
|
drv = list_entry(entry, struct phy_driver, list);
|
|
if ((drv->uid & drv->mask) == (phy_id & drv->mask))
|
|
return drv;
|
|
}
|
|
|
|
/* If we made it here, there's no driver for this PHY */
|
|
return generic_for_interface(interface);
|
|
}
|
|
|
|
static struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
|
|
u32 phy_id,
|
|
phy_interface_t interface)
|
|
{
|
|
struct phy_device *dev;
|
|
|
|
/*
|
|
* We allocate the device, and initialize the
|
|
* default values
|
|
*/
|
|
dev = malloc(sizeof(*dev));
|
|
if (!dev) {
|
|
printf("Failed to allocate PHY device for %s:%d\n",
|
|
bus->name, addr);
|
|
return NULL;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
dev->duplex = -1;
|
|
dev->link = 0;
|
|
dev->interface = interface;
|
|
|
|
dev->autoneg = AUTONEG_ENABLE;
|
|
|
|
dev->addr = addr;
|
|
dev->phy_id = phy_id;
|
|
dev->bus = bus;
|
|
|
|
dev->drv = get_phy_driver(dev, interface);
|
|
|
|
phy_probe(dev);
|
|
|
|
bus->phymap[addr] = dev;
|
|
|
|
return dev;
|
|
}
|
|
|
|
/**
|
|
* get_phy_id - reads the specified addr for its ID.
|
|
* @bus: the target MII bus
|
|
* @addr: PHY address on the MII bus
|
|
* @phy_id: where to store the ID retrieved.
|
|
*
|
|
* Description: Reads the ID registers of the PHY at @addr on the
|
|
* @bus, stores it in @phy_id and returns zero on success.
|
|
*/
|
|
int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
|
|
{
|
|
int phy_reg;
|
|
|
|
/*
|
|
* Grab the bits from PHYIR1, and put them
|
|
* in the upper half
|
|
*/
|
|
phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
|
|
|
|
if (phy_reg < 0)
|
|
return -EIO;
|
|
|
|
*phy_id = (phy_reg & 0xffff) << 16;
|
|
|
|
/* Grab the bits from PHYIR2, and put them in the lower half */
|
|
phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
|
|
|
|
if (phy_reg < 0)
|
|
return -EIO;
|
|
|
|
*phy_id |= (phy_reg & 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_device *create_phy_by_mask(struct mii_dev *bus,
|
|
uint phy_mask, int devad,
|
|
phy_interface_t interface)
|
|
{
|
|
u32 phy_id = 0xffffffff;
|
|
|
|
while (phy_mask) {
|
|
int addr = ffs(phy_mask) - 1;
|
|
int r = get_phy_id(bus, addr, devad, &phy_id);
|
|
/* If the PHY ID is mostly f's, we didn't find anything */
|
|
if (r == 0 && (phy_id & 0x1fffffff) != 0x1fffffff)
|
|
return phy_device_create(bus, addr, phy_id, interface);
|
|
phy_mask &= ~(1 << addr);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static struct phy_device *search_for_existing_phy(struct mii_dev *bus,
|
|
uint phy_mask,
|
|
phy_interface_t interface)
|
|
{
|
|
/* If we have one, return the existing device, with new interface */
|
|
while (phy_mask) {
|
|
int addr = ffs(phy_mask) - 1;
|
|
|
|
if (bus->phymap[addr]) {
|
|
bus->phymap[addr]->interface = interface;
|
|
return bus->phymap[addr];
|
|
}
|
|
phy_mask &= ~(1 << addr);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus,
|
|
uint phy_mask,
|
|
phy_interface_t interface)
|
|
{
|
|
int i;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = search_for_existing_phy(bus, phy_mask, interface);
|
|
if (phydev)
|
|
return phydev;
|
|
/* Try Standard (ie Clause 22) access */
|
|
/* Otherwise we have to try Clause 45 */
|
|
for (i = 0; i < 5; i++) {
|
|
phydev = create_phy_by_mask(bus, phy_mask,
|
|
i ? i : MDIO_DEVAD_NONE, interface);
|
|
if (IS_ERR(phydev))
|
|
return NULL;
|
|
if (phydev)
|
|
return phydev;
|
|
}
|
|
|
|
debug("\n%s PHY: ", bus->name);
|
|
while (phy_mask) {
|
|
int addr = ffs(phy_mask) - 1;
|
|
|
|
debug("%d ", addr);
|
|
phy_mask &= ~(1 << addr);
|
|
}
|
|
debug("not found\n");
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* get_phy_device - reads the specified PHY device and returns its
|
|
* @phy_device struct
|
|
* @bus: the target MII bus
|
|
* @addr: PHY address on the MII bus
|
|
*
|
|
* Description: Reads the ID registers of the PHY at @addr on the
|
|
* @bus, then allocates and returns the phy_device to represent it.
|
|
*/
|
|
static struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
|
|
phy_interface_t interface)
|
|
{
|
|
return get_phy_device_by_mask(bus, 1 << addr, interface);
|
|
}
|
|
|
|
int phy_reset(struct phy_device *phydev)
|
|
{
|
|
int reg;
|
|
int timeout = 500;
|
|
int devad = MDIO_DEVAD_NONE;
|
|
|
|
if (phydev->flags & PHY_FLAG_BROKEN_RESET)
|
|
return 0;
|
|
|
|
#ifdef CONFIG_PHYLIB_10G
|
|
/* If it's 10G, we need to issue reset through one of the MMDs */
|
|
if (is_10g_interface(phydev->interface)) {
|
|
if (!phydev->mmds)
|
|
gen10g_discover_mmds(phydev);
|
|
|
|
devad = ffs(phydev->mmds) - 1;
|
|
}
|
|
#endif
|
|
|
|
if (phy_write(phydev, devad, MII_BMCR, BMCR_RESET) < 0) {
|
|
debug("PHY reset failed\n");
|
|
return -1;
|
|
}
|
|
|
|
#ifdef CONFIG_PHY_RESET_DELAY
|
|
udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
|
|
#endif
|
|
/*
|
|
* Poll the control register for the reset bit to go to 0 (it is
|
|
* auto-clearing). This should happen within 0.5 seconds per the
|
|
* IEEE spec.
|
|
*/
|
|
reg = phy_read(phydev, devad, MII_BMCR);
|
|
while ((reg & BMCR_RESET) && timeout--) {
|
|
reg = phy_read(phydev, devad, MII_BMCR);
|
|
|
|
if (reg < 0) {
|
|
debug("PHY status read failed\n");
|
|
return -1;
|
|
}
|
|
udelay(1000);
|
|
}
|
|
|
|
if (reg & BMCR_RESET) {
|
|
puts("PHY reset timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int miiphy_reset(const char *devname, unsigned char addr)
|
|
{
|
|
struct mii_dev *bus = miiphy_get_dev_by_name(devname);
|
|
struct phy_device *phydev;
|
|
|
|
/*
|
|
* miiphy_reset was only used on standard PHYs, so we'll fake it here.
|
|
* If later code tries to connect with the right interface, this will
|
|
* be corrected by get_phy_device in phy_connect()
|
|
*/
|
|
phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII);
|
|
|
|
return phy_reset(phydev);
|
|
}
|
|
|
|
struct phy_device *phy_find_by_mask(struct mii_dev *bus, uint phy_mask,
|
|
phy_interface_t interface)
|
|
{
|
|
/* Reset the bus */
|
|
if (bus->reset) {
|
|
bus->reset(bus);
|
|
|
|
/* Wait 15ms to make sure the PHY has come out of hard reset */
|
|
mdelay(15);
|
|
}
|
|
|
|
return get_phy_device_by_mask(bus, phy_mask, interface);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
void phy_connect_dev(struct phy_device *phydev, struct udevice *dev)
|
|
#else
|
|
void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev)
|
|
#endif
|
|
{
|
|
/* Soft Reset the PHY */
|
|
phy_reset(phydev);
|
|
if (phydev->dev && phydev->dev != dev) {
|
|
printf("%s:%d is connected to %s. Reconnecting to %s\n",
|
|
phydev->bus->name, phydev->addr,
|
|
phydev->dev->name, dev->name);
|
|
}
|
|
phydev->dev = dev;
|
|
debug("%s connected to %s\n", dev->name, phydev->drv->name);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
|
|
struct udevice *dev,
|
|
phy_interface_t interface)
|
|
#else
|
|
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
|
|
struct eth_device *dev,
|
|
phy_interface_t interface)
|
|
#endif
|
|
{
|
|
struct phy_device *phydev = NULL;
|
|
#ifdef CONFIG_PHY_FIXED
|
|
int sn;
|
|
const char *name;
|
|
|
|
sn = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
|
|
while (sn > 0) {
|
|
name = fdt_get_name(gd->fdt_blob, sn, NULL);
|
|
if (name && strcmp(name, "fixed-link") == 0) {
|
|
phydev = phy_device_create(bus,
|
|
sn, PHY_FIXED_ID, interface);
|
|
break;
|
|
}
|
|
sn = fdt_next_subnode(gd->fdt_blob, sn);
|
|
}
|
|
#endif
|
|
if (!phydev)
|
|
phydev = phy_find_by_mask(bus, 1 << addr, interface);
|
|
|
|
if (phydev)
|
|
phy_connect_dev(phydev, dev);
|
|
else
|
|
printf("Could not get PHY for %s: addr %d\n", bus->name, addr);
|
|
return phydev;
|
|
}
|
|
|
|
/*
|
|
* Start the PHY. Returns 0 on success, or a negative error code.
|
|
*/
|
|
int phy_startup(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->startup)
|
|
return phydev->drv->startup(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
__weak int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->config)
|
|
return phydev->drv->config(phydev);
|
|
return 0;
|
|
}
|
|
|
|
int phy_config(struct phy_device *phydev)
|
|
{
|
|
/* Invoke an optional board-specific helper */
|
|
return board_phy_config(phydev);
|
|
}
|
|
|
|
int phy_shutdown(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->shutdown)
|
|
phydev->drv->shutdown(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int phy_get_interface_by_name(const char *str)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PHY_INTERFACE_MODE_COUNT; i++) {
|
|
if (!strcmp(str, phy_interface_strings[i]))
|
|
return i;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|