upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
243 lines
6.9 KiB
243 lines
6.9 KiB
/*
|
|
* Copyright (C) 2010 Heiko Schocher <hs@denx.de>
|
|
*
|
|
* based on:
|
|
* Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __IMX27LITE_COMMON_CONFIG_H
|
|
#define __IMX27LITE_COMMON_CONFIG_H
|
|
|
|
/*
|
|
* SoC Configuration
|
|
*/
|
|
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
|
|
#define CONFIG_MX27
|
|
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
/*
|
|
* Lowlevel configuration
|
|
*/
|
|
#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
|
|
(ESDCFG_TRC(10) | \
|
|
ESDCFG_TRCD(3) | \
|
|
ESDCFG_TCAS(cas) | \
|
|
ESDCFG_TRRD(1) | \
|
|
ESDCFG_TRAS(5) | \
|
|
ESDCFG_TWR | \
|
|
ESDCFG_TMRD(2) | \
|
|
ESDCFG_TRP(2) | \
|
|
ESDCFG_TXP(3))
|
|
|
|
#define SDRAM_ESDCTL_REGISTER_VAL \
|
|
(ESDCTL_PRCT(0) | \
|
|
ESDCTL_BL | \
|
|
ESDCTL_PWDT(0) | \
|
|
ESDCTL_SREFR(3) | \
|
|
ESDCTL_DSIZ_32 | \
|
|
ESDCTL_COL10 | \
|
|
ESDCTL_ROW13 | \
|
|
ESDCTL_SDE)
|
|
|
|
#define SDRAM_ALL_VAL 0xf00
|
|
|
|
#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */
|
|
#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000
|
|
|
|
#define MPCTL0_VAL 0x1ef15d5
|
|
|
|
#define SPCTL0_VAL 0x043a1c09
|
|
|
|
#define CSCR_VAL 0x33f08107
|
|
|
|
#define PCDR0_VAL 0x120470c3
|
|
#define PCDR1_VAL 0x03030303
|
|
#define PCCR0_VAL 0xffffffff
|
|
#define PCCR1_VAL 0xfffffffc
|
|
|
|
#define AIPI1_PSR0_VAL 0x20040304
|
|
#define AIPI1_PSR1_VAL 0xdffbfcfb
|
|
#define AIPI2_PSR0_VAL 0x07ffc200
|
|
#define AIPI2_PSR1_VAL 0xffffffff
|
|
|
|
/*
|
|
* Memory Info
|
|
*/
|
|
/* malloc() len */
|
|
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024)
|
|
/* reserved for initial data */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
|
/* memtest start address */
|
|
#define CONFIG_SYS_MEMTEST_START 0xA0000000
|
|
#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */
|
|
#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */
|
|
#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
|
|
|
|
/*
|
|
* Serial Driver info
|
|
*/
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_SYS_MX27_UART1
|
|
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
|
|
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* Flash & Environment
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
/* Use buffered writes (~10x faster) */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
/* Use hardware sector protection */
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
|
|
/* CS2 Base address */
|
|
#define PHYS_FLASH_1 0xc0000000
|
|
/* Flash Base for U-Boot */
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
|
|
CONFIG_SYS_FLASH_SECT_SZ)
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
|
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
/*
|
|
* Ethernet
|
|
*/
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x1f
|
|
#define CONFIG_MII
|
|
#define CONFIG_NET_MULTI
|
|
|
|
/*
|
|
* MTD
|
|
*/
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
/*
|
|
* NAND
|
|
*/
|
|
#define CONFIG_NAND_MXC
|
|
#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0xd8000000
|
|
#define CONFIG_JFFS2_NAND
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
|
|
|
|
/*
|
|
* SD/MMC
|
|
*/
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_MXC_MMC
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/*
|
|
* MTD partitions
|
|
*/
|
|
#define CONFIG_CMD_MTDPARTS
|
|
|
|
/*
|
|
* U-Boot general configuration
|
|
*/
|
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
/* Print buffer sz */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
/*
|
|
* U-Boot commands
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PING
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
#define xstr(s) str(s)
|
|
#define str(s) #s
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addtty=setenv bootargs ${bootargs}" \
|
|
" console=ttymxc0,${baudrate}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"addmisc=setenv bootargs ${bootargs}\0" \
|
|
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
|
"kernel_addr_r=a0800000\0" \
|
|
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
|
|
"rootpath=/opt/eldk-4.2-arm/arm\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
|
|
"run nfsargs addip addtty addmtd addmisc;" \
|
|
"bootm\0" \
|
|
"bootcmd=run net_nfs\0" \
|
|
"load=tftp ${loadaddr} ${u-boot}\0" \
|
|
"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
|
|
" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
|
|
" +${filesize};cp.b ${fileaddr} " \
|
|
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
|
|
"upd=run load update\0" \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
|
|
/* additions for new relocation code, must added to all boards */
|
|
#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
|
|
CONFIG_SYS_GBL_DATA_SIZE)
|
|
#endif /* __IMX27LITE_COMMON_CONFIG_H */
|
|
|