upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-am33xx/ddr_defs.h

194 lines
5.1 KiB

/*
* ddr_defs.h
*
* ddr specific header
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _DDR_DEFS_H
#define _DDR_DEFS_H
#include <asm/arch/hardware.h>
#include <asm/emif.h>
/* AM335X EMIF Register values */
#define VTP_CTRL_READY (0x1 << 5)
#define VTP_CTRL_ENABLE (0x1 << 6)
#define VTP_CTRL_START_EN (0x1)
#define PHY_DLL_LOCK_DIFF 0x0
#define DDR_CKE_CTRL_NORMAL 0x1
#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */
#define DDR2_EMIF_TIM1 0x0666B3C9
#define DDR2_EMIF_TIM2 0x243631CA
#define DDR2_EMIF_TIM3 0x0000033F
#define DDR2_EMIF_SDCFG 0x41805332
#define DDR2_EMIF_SDREF 0x0000081a
#define DDR2_DLL_LOCK_DIFF 0x0
#define DDR2_RATIO 0x80
#define DDR2_INVERT_CLKOUT 0x00
#define DDR2_RD_DQS 0x12
#define DDR2_WR_DQS 0x00
#define DDR2_PHY_WRLVL 0x00
#define DDR2_PHY_GATELVL 0x00
#define DDR2_PHY_WR_DATA 0x40
#define DDR2_PHY_FIFO_WE 0x80
#define DDR2_PHY_RANK0_DELAY 0x1
#define DDR2_IOCTRL_VALUE 0x18B
/* Micron MT41J128M16JT-125 */
#define DDR3_EMIF_READ_LATENCY 0x06
#define DDR3_EMIF_TIM1 0x0888A39B
#define DDR3_EMIF_TIM2 0x26337FDA
#define DDR3_EMIF_TIM3 0x501F830F
#define DDR3_EMIF_SDCFG 0x61C04AB2
#define DDR3_EMIF_SDREF 0x0000093B
#define DDR3_ZQ_CFG 0x50074BE4
#define DDR3_DLL_LOCK_DIFF 0x1
#define DDR3_RATIO 0x40
#define DDR3_INVERT_CLKOUT 0x1
#define DDR3_RD_DQS 0x3B
#define DDR3_WR_DQS 0x85
#define DDR3_PHY_WR_DATA 0xC1
#define DDR3_PHY_FIFO_WE 0x100
#define DDR3_IOCTRL_VALUE 0x18B
/**
* Configure SDRAM
*/
void config_sdram(const struct emif_regs *regs);
/**
* Set SDRAM timings
*/
void set_sdram_timings(const struct emif_regs *regs);
/**
* Configure DDR PHY
*/
void config_ddr_phy(const struct emif_regs *regs);
/**
* This structure represents the DDR registers on AM33XX devices.
* We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that
* correspond to DATA1 registers defined here.
*/
struct ddr_regs {
unsigned int resv0[7];
unsigned int cm0csratio; /* offset 0x01C */
unsigned int resv1[2];
unsigned int cm0dldiff; /* offset 0x028 */
unsigned int cm0iclkout; /* offset 0x02C */
unsigned int resv2[8];
unsigned int cm1csratio; /* offset 0x050 */
unsigned int resv3[2];
unsigned int cm1dldiff; /* offset 0x05C */
unsigned int cm1iclkout; /* offset 0x060 */
unsigned int resv4[8];
unsigned int cm2csratio; /* offset 0x084 */
unsigned int resv5[2];
unsigned int cm2dldiff; /* offset 0x090 */
unsigned int cm2iclkout; /* offset 0x094 */
unsigned int resv6[12];
unsigned int dt0rdsratio0; /* offset 0x0C8 */
unsigned int resv7[4];
unsigned int dt0wdsratio0; /* offset 0x0DC */
unsigned int resv8[4];
unsigned int dt0wiratio0; /* offset 0x0F0 */
unsigned int resv9;
unsigned int dt0wimode0; /* offset 0x0F8 */
unsigned int dt0giratio0; /* offset 0x0FC */
unsigned int resv10;
unsigned int dt0gimode0; /* offset 0x104 */
unsigned int dt0fwsratio0; /* offset 0x108 */
unsigned int resv11[4];
unsigned int dt0dqoffset; /* offset 0x11C */
unsigned int dt0wrsratio0; /* offset 0x120 */
unsigned int resv12[4];
unsigned int dt0rdelays0; /* offset 0x134 */
unsigned int dt0dldiff0; /* offset 0x138 */
};
/**
* Encapsulates DDR CMD control registers.
*/
struct cmd_control {
unsigned long cmd0csratio;
unsigned long cmd0csforce;
unsigned long cmd0csdelay;
unsigned long cmd0dldiff;
unsigned long cmd0iclkout;
unsigned long cmd1csratio;
unsigned long cmd1csforce;
unsigned long cmd1csdelay;
unsigned long cmd1dldiff;
unsigned long cmd1iclkout;
unsigned long cmd2csratio;
unsigned long cmd2csforce;
unsigned long cmd2csdelay;
unsigned long cmd2dldiff;
unsigned long cmd2iclkout;
};
/**
* Encapsulates DDR DATA registers.
*/
struct ddr_data {
unsigned long datardsratio0;
unsigned long datawdsratio0;
unsigned long datawiratio0;
unsigned long datagiratio0;
unsigned long datafwsratio0;
unsigned long datawrsratio0;
unsigned long datauserank0delay;
unsigned long datadldiff0;
};
/**
* Configure DDR CMD control registers
*/
void config_cmd_ctrl(const struct cmd_control *cmd);
/**
* Configure DDR DATA registers
*/
void config_ddr_data(int data_macrono, const struct ddr_data *data);
/**
* This structure represents the DDR io control on AM33XX devices.
*/
struct ddr_cmdtctrl {
unsigned int resv1[1];
unsigned int cm0ioctl;
unsigned int cm1ioctl;
unsigned int cm2ioctl;
unsigned int resv2[12];
unsigned int dt0ioctl;
unsigned int dt1ioctl;
};
/**
* Configure DDR io control registers
*/
void config_io_ctrl(unsigned long val);
struct ddr_ctrl {
unsigned int ddrioctrl;
unsigned int resv1[325];
unsigned int ddrckectrl;
};
void config_ddr(short ddr_type);
#endif /* _DDR_DEFS_H */