upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
angelo@sysam.it
5296cb1d99
|
10 years ago | |
---|---|---|
.. | ||
Kconfig | ||
MAINTAINERS | 10 years ago | |
Makefile | ||
README | ||
config.mk | ||
m5253evbe.c |
README
Freescale Amadeus Plus M5253EVBE board
======================================
Hayden Fraser(Hayden.Fraser@freescale.com)
Created 06/05/2007
===========================================
1. SWITCH SETTINGS
==================
1.1 N/A
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
linux kernel, you can customize it based on your system requirements:
SDR: 0x00000000-0x00ffffff
SRAM0: 0x20010000-0x20017fff
SRAM1: 0x20000000-0x2000ffff
MBAR1: 0x10000000-0x4fffffff
MBAR2: 0x80000000-0xCfffffff
Flash: 0xffe00000-0xffffffff
3. DEFINITIONS AND COMPILATION
==============================
3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h
CONFIG_MCF52x2 Processor family
CONFIG_MCF5253 MCF5253 specific
CONFIG_M5253EVBE Amadeus Plus board specific
CONFIG_SYS_CLK Define Amadeus Plus CPU Clock
CONFIG_SYS_MBAR MBAR base address
CONFIG_SYS_MBAR2 MBAR2 base address
3.2 Compilation
export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf-
cd u-boot-1-2-x
make distclean
make M5253EVBE_config
make
4. SCREEN DUMP
==============
4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00)
CPU: Freescale Coldfire MCF5253 at 62 MHz
Board: Freescale MCF5253 EVBE
DRAM: 16 MB
FLASH: 2 MB
In: serial
Out: serial
Err: serial
=> flinfo
Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors
AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49
Erase timeout: 16384 ms, write timeout: 1 ms
Sector Start Addresses:
FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO
FFE20000 FFE30000 FFE40000 FFE50000 FFE60000
FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000
FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000
FFF10000 FFF20000 FFF30000 FFF40000 FFF50000
FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000
FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000
=> bdinfo
boot_params = 0x00F62F90
memstart = 0x00000000
memsize = 0x01000000
flashstart = 0xFFE00000
flashsize = 0x00200000
flashoffset = 0x00000000
baudrate = 19200 bps
=> printenv
bootdelay=5
baudrate=19200
stdin=serial
stdout=serial
stderr=serial
Environment size: 134/8188 bytes
=> saveenv
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
=>
5. COMPILER
-----------
To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture
compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used.
You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M
codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M