upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Shengzhou Liu
c0379b19e2
|
10 years ago | |
---|---|---|
.. | ||
Kconfig | 10 years ago | |
MAINTAINERS | 10 years ago | |
Makefile | ||
README | ||
cpld.c | ||
cpld.h | 10 years ago | |
ddr.c | ||
ddr.h | 10 years ago | |
eth_t208xrdb.c | ||
law.c | ||
pci.c | ||
spl.c | ||
t208xrdb.c | 10 years ago | |
t208xrdb.h | ||
t2080_pbi.cfg | ||
t2080_rcw.cfg | 10 years ago | |
tlb.c |
README
T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC.
It can work in two mode: standalone mode and PCIe endpoint mode.
T2080 SoC Overview
------------------
The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
Architecture processor cores with high-performance datapath acceleration
logic and network and peripheral bus interfaces required for networking,
telecom/datacom, wireless infrastructure, and mil/aerospace applications.
T2080 includes the following functions and features:
- Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
- 2MB L2 cache and 512KB CoreNet platform cache (CPC)
- Hierarchical interconnect fabric
- One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- 16 SerDes lanes up to 10.3125 GHz
- 8 Ethernet interfaces, supporting combinations of the following:
- Up to four 10 Gbps Ethernet MACs
- Up to eight 1 Gbps Ethernet MACs
- Up to four 2.5 Gbps Ethernet MACs
- High-speed peripheral interfaces
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
- Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
- Additional peripheral interfaces
- Two serial ATA (SATA 2.0) controllers
- Two high-speed USB 2.0 controllers with integrated PHY
- Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
- Enhanced serial peripheral interface (eSPI)
- Four I2C controllers
- Four 2-pin UARTs or two 4-pin UARTs
- Integrated Flash Controller supporting NAND and NOR flash
- Three eight-channel DMA engines
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0
Differences between T2080 and T2081
-----------------------------------
Feature T2080 T2081
1G Ethernet numbers: 8 6
10G Ethernet numbers: 4 2
SerDes lanes: 16 8
Serial RapidIO,RMan: 2 no
SATA Controller: 2 no
Aurora: yes no
SoC Package: 896-pins 780-pins
T2080PCIe-RDB board Overview
----------------------------
- SERDES Configuration
- SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10)
- SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2)
- SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3)
- SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2)
- SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2)
- SerDes-2 Lane G-H: to SATA1 & SATA2
- Ethernet
- Two on-board 10M/100M/1G RGMII ethernet ports
- Two on-board 10Gbps XFI fiber ports
- Two on-board 10Gbps Base-T copper ports
- DDR Memory
- Supports 72bit 4GB DDR3-LP SODIMM
- PCIe
- One PCIe x4 gold-finger
- One PCIe x4 connector
- One PCIe x2 end-point device (C293 Crypto co-processor)
- IFC/Local Bus
- NOR: 128MB 16-bit NOR Flash
- NAND: 1GB 8-bit NAND flash
- CPLD: for system controlling with programable header on-board
- SATA
- Two SATA 2.0 onnectors on-board
- USB
- Supports two USB 2.0 ports with integrated PHYs
- Two type A ports with 5V@1.5A per port.
- SDHC
- one TF-card connector on-board
- SPI
- On-board 64MB SPI flash
- Other
- Two Serial ports
- Four I2C ports
System Memory map
-----------------
Start Address End Address Description Size
0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB
0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB
0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB
0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
0x0_0000_0000 0x0_ffff_ffff DDR 4GB
128M NOR Flash memory Map
-------------------------
Start Address End Address Definition Max size
0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
0xE8000000 0xE801FFFF RCW (current bank) 128KB
T2080PCIe-RDB Ethernet Port Map
-------------------------------
Label In Uboot In Linux FMan Address Comments PHY
ETH0 FM1@GTEC1 fm1-mac9 0xfe4f0000 10G SFP+ (CS4315)
ETH1 FM1@GTEC2 fm1-mac10 0xfe4f2000 10G SFP+ (CS4315)
ETH2 FM1@GTEC3 fm1-mac1 0xfe4e0000 10G Base-T (AQ1202)
ETH3 FM1@GTEC4 fm1-mac2 0xfe4e2000 10G Base-T (AQ1202)
ETH4 FM1@DTSEC3 fm1-mac3 0xfe4e4000 1G RGMII (RTL8211E)
ETH5 FM1@DTSEC4 fm1-mac4 0xfe4e6000 1G RGMII (RTL8211E)
T2080PCIe-RDB Default DIP-Switch setting
----------------------------------------
SW1[1:8] = '00010011'
SW2[1:8] = '10111111'
SW3[1:8] = '11100001'
Software configurations and board settings
------------------------------------------
1. NOR boot:
a. build NOR boot image
$ make T2080RDB_config
$ make
b. program u-boot.bin image to NOR flash
=> tftp 1000000 u-boot.bin
=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
Switching between default bank and alternate bank on NOR flash
To change boot source to vbank4:
via software: run command 'cpld reset altbank' in u-boot.
via DIP-switch: set SW3[5:7] = '100'
To change boot source to vbank0:
via software: run command 'cpld reset' in u-boot.
via DIP-Switch: set SW3[5:7] = '000'
2. NAND Boot:
a. build PBL image for NAND boot
$ make T2080RDB_NAND_config
$ make
b. program u-boot-with-spl-pbl.bin to NAND flash
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> nand erase 0 d0000
=> nand write 1000000 0 $filesize
set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
3. SPI Boot:
a. build PBL image for SPI boot
$ make T2080RDB_SPIFLASH_config
$ make
b. program u-boot-with-spl-pbl.bin to SPI flash
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> sf probe 0
=> sf erase 0 d0000
=> sf write 1000000 0 $filesize
set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
4. SD Boot:
a. build PBL image for SD boot
$ make T2080RDB_SDCARD_config
$ make
b. program u-boot-with-spl-pbl.bin to micro-SD/TF card
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> mmc write 1000000 8 0x800
set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
2-stage NAND/SPI/SD boot loader
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
Finally SPL transers control to u-boot for futher booting.
SPL has following features:
- Executes within 256K
- No relocation required
Run time view of SPL framework
-------------------------------------------------
|Area | Address |
-------------------------------------------------
|SecureBoot header | 0xFFFC0000 (32KB) |
-------------------------------------------------
|GD, BD | 0xFFFC8000 (4KB) |
-------------------------------------------------
|ENV | 0xFFFC9000 (8KB) |
-------------------------------------------------
|HEAP | 0xFFFCB000 (50KB) |
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
|U-boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T2080RDB
--------------------------------------------------------------
Start End Definition Size
0x000000 0x0FFFFF u-boot img 1MB (2 blocks)
0x100000 0x17FFFF u-boot env 512KB (1 block)
0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
0x200000 0x27FFFF CS4315 ucode 512KB (1 block)
Micro SD Card memory Map on T2080RDB
----------------------------------------------------
Block #blocks Definition Size
0x008 2048 u-boot img 1MB
0x800 0016 u-boot env 8KB
0x820 0128 FMAN ucode 64KB
0x8a0 0512 CS4315 ucode 256KB
SPI Flash memory Map on T2080RDB
----------------------------------------------------
Start End Definition Size
0x000000 0x0FFFFF u-boot img 1MB
0x100000 0x101FFF u-boot env 8KB
0x110000 0x11FFFF FMAN ucode 64KB
0x120000 0x15FFFF CS4315 ucode 256KB
How to update the ucode of Cortina CS4315/CS4340 10G PHY
--------------------------------------------------------
=> tftp 1000000 CS4315-CS4340-PHY-ucode.txt
=> pro off all;era 0xefe00000 0xefefffff;cp.b 1000000 0xefe00000 $filesize
How to update the ucode of Freescale FMAN
-----------------------------------------
=> tftp 1000000 fsl_fman_ucode_t2080_r1.0.bin
=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
For more details, please refer to T2080PCIe-RDB User Guide and access
website www.freescale.com and Freescale QorIQ SDK Infocenter document.