upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
178 lines
4.4 KiB
178 lines
4.4 KiB
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#ifndef _DDR3_TRAINING_IP_H_
|
|
#define _DDR3_TRAINING_IP_H_
|
|
|
|
#include "ddr3_training_ip_def.h"
|
|
#include "ddr_topology_def.h"
|
|
#include "ddr_training_ip_db.h"
|
|
|
|
#define DDR3_TIP_VERSION_STRING "DDR3 Training Sequence - Ver TIP-1.29."
|
|
|
|
#define MAX_CS_NUM 4
|
|
#define MAX_TOTAL_BUS_NUM (MAX_INTERFACE_NUM * MAX_BUS_NUM)
|
|
#define MAX_DQ_NUM 40
|
|
|
|
#define GET_MIN(arg1, arg2) ((arg1) < (arg2)) ? (arg1) : (arg2)
|
|
#define GET_MAX(arg1, arg2) ((arg1) < (arg2)) ? (arg2) : (arg1)
|
|
|
|
#define INIT_CONTROLLER_MASK_BIT 0x00000001
|
|
#define STATIC_LEVELING_MASK_BIT 0x00000002
|
|
#define SET_LOW_FREQ_MASK_BIT 0x00000004
|
|
#define LOAD_PATTERN_MASK_BIT 0x00000008
|
|
#define SET_MEDIUM_FREQ_MASK_BIT 0x00000010
|
|
#define WRITE_LEVELING_MASK_BIT 0x00000020
|
|
#define LOAD_PATTERN_2_MASK_BIT 0x00000040
|
|
#define READ_LEVELING_MASK_BIT 0x00000080
|
|
#define SW_READ_LEVELING_MASK_BIT 0x00000100
|
|
#define WRITE_LEVELING_SUPP_MASK_BIT 0x00000200
|
|
#define PBS_RX_MASK_BIT 0x00000400
|
|
#define PBS_TX_MASK_BIT 0x00000800
|
|
#define SET_TARGET_FREQ_MASK_BIT 0x00001000
|
|
#define ADJUST_DQS_MASK_BIT 0x00002000
|
|
#define WRITE_LEVELING_TF_MASK_BIT 0x00004000
|
|
#define LOAD_PATTERN_HIGH_MASK_BIT 0x00008000
|
|
#define READ_LEVELING_TF_MASK_BIT 0x00010000
|
|
#define WRITE_LEVELING_SUPP_TF_MASK_BIT 0x00020000
|
|
#define DM_PBS_TX_MASK_BIT 0x00040000
|
|
#define CENTRALIZATION_RX_MASK_BIT 0x00100000
|
|
#define CENTRALIZATION_TX_MASK_BIT 0x00200000
|
|
#define TX_EMPHASIS_MASK_BIT 0x00400000
|
|
#define PER_BIT_READ_LEVELING_TF_MASK_BIT 0x00800000
|
|
#define VREF_CALIBRATION_MASK_BIT 0x01000000
|
|
|
|
enum hws_result {
|
|
TEST_FAILED = 0,
|
|
TEST_SUCCESS = 1,
|
|
NO_TEST_DONE = 2
|
|
};
|
|
|
|
enum hws_training_result {
|
|
RESULT_PER_BIT,
|
|
RESULT_PER_BYTE
|
|
};
|
|
|
|
enum auto_tune_stage {
|
|
INIT_CONTROLLER,
|
|
STATIC_LEVELING,
|
|
SET_LOW_FREQ,
|
|
LOAD_PATTERN,
|
|
SET_MEDIUM_FREQ,
|
|
WRITE_LEVELING,
|
|
LOAD_PATTERN_2,
|
|
READ_LEVELING,
|
|
WRITE_LEVELING_SUPP,
|
|
PBS_RX,
|
|
PBS_TX,
|
|
SET_TARGET_FREQ,
|
|
ADJUST_DQS,
|
|
WRITE_LEVELING_TF,
|
|
READ_LEVELING_TF,
|
|
WRITE_LEVELING_SUPP_TF,
|
|
DM_PBS_TX,
|
|
VREF_CALIBRATION,
|
|
CENTRALIZATION_RX,
|
|
CENTRALIZATION_TX,
|
|
TX_EMPHASIS,
|
|
LOAD_PATTERN_HIGH,
|
|
PER_BIT_READ_LEVELING_TF,
|
|
MAX_STAGE_LIMIT
|
|
};
|
|
|
|
enum hws_access_type {
|
|
ACCESS_TYPE_UNICAST = 0,
|
|
ACCESS_TYPE_MULTICAST = 1
|
|
};
|
|
|
|
enum hws_algo_type {
|
|
ALGO_TYPE_DYNAMIC,
|
|
ALGO_TYPE_STATIC
|
|
};
|
|
|
|
struct init_cntr_param {
|
|
int is_ctrl64_bit;
|
|
int do_mrs_phy;
|
|
int init_phy;
|
|
int msys_init;
|
|
};
|
|
|
|
struct pattern_info {
|
|
u8 num_of_phases_tx;
|
|
u8 tx_burst_size;
|
|
u8 delay_between_bursts;
|
|
u8 num_of_phases_rx;
|
|
u32 start_addr;
|
|
u8 pattern_len;
|
|
};
|
|
|
|
/* CL value for each frequency */
|
|
struct cl_val_per_freq {
|
|
u8 cl_val[DDR_FREQ_LIMIT];
|
|
};
|
|
|
|
struct cs_element {
|
|
u8 cs_num;
|
|
u8 num_of_cs;
|
|
};
|
|
|
|
struct mode_info {
|
|
/* 32 bits representing MRS bits */
|
|
u32 reg_mr0[MAX_INTERFACE_NUM];
|
|
u32 reg_mr1[MAX_INTERFACE_NUM];
|
|
u32 reg_mr2[MAX_INTERFACE_NUM];
|
|
u32 reg_m_r3[MAX_INTERFACE_NUM];
|
|
/*
|
|
* Each element in array represent read_data_sample register delay for
|
|
* a specific interface.
|
|
* Each register, 4 bits[0+CS*8 to 4+CS*8] represent Number of DDR
|
|
* cycles from read command until data is ready to be fetched from
|
|
* the PHY, when accessing CS.
|
|
*/
|
|
u32 read_data_sample[MAX_INTERFACE_NUM];
|
|
/*
|
|
* Each element in array represent read_data_sample register delay for
|
|
* a specific interface.
|
|
* Each register, 4 bits[0+CS*8 to 4+CS*8] represent the total delay
|
|
* from read command until opening the read mask, when accessing CS.
|
|
* This field defines the delay in DDR cycles granularity.
|
|
*/
|
|
u32 read_data_ready[MAX_INTERFACE_NUM];
|
|
};
|
|
|
|
struct hws_tip_freq_config_info {
|
|
u8 is_supported;
|
|
u8 bw_per_freq;
|
|
u8 rate_per_freq;
|
|
};
|
|
|
|
struct hws_cs_config_info {
|
|
u32 cs_reg_value;
|
|
u32 cs_cbe_value;
|
|
};
|
|
|
|
struct dfx_access {
|
|
u8 pipe;
|
|
u8 client;
|
|
};
|
|
|
|
struct hws_xsb_info {
|
|
struct dfx_access *dfx_table;
|
|
};
|
|
|
|
int ddr3_tip_register_dq_table(u32 dev_num, u32 *table);
|
|
int hws_ddr3_tip_select_ddr_controller(u32 dev_num, int enable);
|
|
int hws_ddr3_tip_init_controller(u32 dev_num,
|
|
struct init_cntr_param *init_cntr_prm);
|
|
int hws_ddr3_tip_load_topology_map(u32 dev_num,
|
|
struct hws_topology_map *topology);
|
|
int hws_ddr3_tip_run_alg(u32 dev_num, enum hws_algo_type algo_type);
|
|
int hws_ddr3_tip_mode_read(u32 dev_num, struct mode_info *mode_info);
|
|
int ddr3_tip_is_pup_lock(u32 *pup_buf, enum hws_training_result read_mode);
|
|
u8 ddr3_tip_get_buf_min(u8 *buf_ptr);
|
|
u8 ddr3_tip_get_buf_max(u8 *buf_ptr);
|
|
|
|
#endif /* _DDR3_TRAINING_IP_H_ */
|
|
|