upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
441 lines
13 KiB
441 lines
13 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2002 SIXNET, dge@sixnetio.com.
|
|
*
|
|
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
|
|
* Stephan Linz <linz@li-pro.net>
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support for DS1306 RTC using SPI:
|
|
*
|
|
* - SXNI855T: it uses its own soft SPI here in this file
|
|
* - all other: use the external spi_xfer() function
|
|
* (see include/spi.h)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <rtc.h>
|
|
#include <spi.h>
|
|
|
|
#if defined(CONFIG_CMD_DATE)
|
|
|
|
#define RTC_SECONDS 0x00
|
|
#define RTC_MINUTES 0x01
|
|
#define RTC_HOURS 0x02
|
|
#define RTC_DAY_OF_WEEK 0x03
|
|
#define RTC_DATE_OF_MONTH 0x04
|
|
#define RTC_MONTH 0x05
|
|
#define RTC_YEAR 0x06
|
|
|
|
#define RTC_SECONDS_ALARM0 0x07
|
|
#define RTC_MINUTES_ALARM0 0x08
|
|
#define RTC_HOURS_ALARM0 0x09
|
|
#define RTC_DAY_OF_WEEK_ALARM0 0x0a
|
|
|
|
#define RTC_SECONDS_ALARM1 0x0b
|
|
#define RTC_MINUTES_ALARM1 0x0c
|
|
#define RTC_HOURS_ALARM1 0x0d
|
|
#define RTC_DAY_OF_WEEK_ALARM1 0x0e
|
|
|
|
#define RTC_CONTROL 0x0f
|
|
#define RTC_STATUS 0x10
|
|
#define RTC_TRICKLE_CHARGER 0x11
|
|
|
|
#define RTC_USER_RAM_BASE 0x20
|
|
|
|
/* ************************************************************************* */
|
|
#ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */
|
|
|
|
static void soft_spi_send (unsigned char n);
|
|
static unsigned char soft_spi_read (void);
|
|
static void init_spi (void);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions
|
|
*/
|
|
|
|
#define PB_SPISCK 0x00000002 /* PB 30 */
|
|
#define PB_SPIMOSI 0x00000004 /* PB 29 */
|
|
#define PB_SPIMISO 0x00000008 /* PB 28 */
|
|
#define PB_SPI_CE 0x00010000 /* PB 15 */
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* read clock time from DS1306 and return it in *tmp */
|
|
int rtc_get (struct rtc_time *tmp)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
unsigned char spi_byte; /* Data Byte */
|
|
|
|
init_spi (); /* set port B for software SPI */
|
|
|
|
/* Now we can enable the DS1306 RTC */
|
|
immap->im_cpm.cp_pbdat |= PB_SPI_CE;
|
|
udelay (10);
|
|
|
|
/* Shift out the address (0) of the time in the Clock Chip */
|
|
soft_spi_send (0);
|
|
|
|
/* Put the clock readings into the rtc_time structure */
|
|
tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */
|
|
tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */
|
|
|
|
/* Hours are trickier */
|
|
spi_byte = soft_spi_read (); /* Read Hours into temporary value */
|
|
if (spi_byte & 0x40) {
|
|
/* 12 hour mode bit is set (time is in 1-12 format) */
|
|
if (spi_byte & 0x20) {
|
|
/* since PM we add 11 to get 0-23 for hours */
|
|
tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11;
|
|
} else {
|
|
/* since AM we subtract 1 to get 0-23 for hours */
|
|
tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1;
|
|
}
|
|
} else {
|
|
/* Otherwise, 0-23 hour format */
|
|
tmp->tm_hour = (bcd2bin (spi_byte & 0x3F));
|
|
}
|
|
|
|
soft_spi_read (); /* Read and discard Day of week */
|
|
tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */
|
|
tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */
|
|
|
|
/* Read Year and convert to this century */
|
|
tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000;
|
|
|
|
/* Now we can disable the DS1306 RTC */
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
|
|
udelay (10);
|
|
|
|
rtc_calc_weekday(tmp); /* Determine the day of week */
|
|
|
|
debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* set clock time in DS1306 RTC and in MPC8xx RTC */
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
init_spi (); /* set port B for software SPI */
|
|
|
|
/* Now we can enable the DS1306 RTC */
|
|
immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
|
|
udelay (10);
|
|
|
|
/* First disable write protect in the clock chip control register */
|
|
soft_spi_send (0x8F); /* send address of the control register */
|
|
soft_spi_send (0x00); /* send control register contents */
|
|
|
|
/* Now disable the DS1306 to terminate the write */
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
|
|
udelay (10);
|
|
|
|
/* Now enable the DS1306 to initiate a new write */
|
|
immap->im_cpm.cp_pbdat |= PB_SPI_CE;
|
|
udelay (10);
|
|
|
|
/* Next, send the address of the clock time write registers */
|
|
soft_spi_send (0x80); /* send address of the first time register */
|
|
|
|
/* Use Burst Mode to send all of the time data to the clock */
|
|
bin2bcd (tmp->tm_sec);
|
|
soft_spi_send (bin2bcd (tmp->tm_sec)); /* Send Seconds */
|
|
soft_spi_send (bin2bcd (tmp->tm_min)); /* Send Minutes */
|
|
soft_spi_send (bin2bcd (tmp->tm_hour)); /* Send Hour */
|
|
soft_spi_send (bin2bcd (tmp->tm_wday)); /* Send Day of the Week */
|
|
soft_spi_send (bin2bcd (tmp->tm_mday)); /* Send Day of Month */
|
|
soft_spi_send (bin2bcd (tmp->tm_mon)); /* Send Month */
|
|
soft_spi_send (bin2bcd (tmp->tm_year - 2000)); /* Send Year */
|
|
|
|
/* Now we can disable the Clock chip to terminate the burst write */
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
|
|
udelay (10);
|
|
|
|
/* Now we can enable the Clock chip to initiate a new write */
|
|
immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
|
|
udelay (10);
|
|
|
|
/* First we Enable write protect in the clock chip control register */
|
|
soft_spi_send (0x8F); /* send address of the control register */
|
|
soft_spi_send (0x40); /* send out Control Register contents */
|
|
|
|
/* Now disable the DS1306 */
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
|
|
udelay (10);
|
|
|
|
/* Set standard MPC8xx clock to the same time so Linux will
|
|
* see the time even if it doesn't have a DS1306 clock driver.
|
|
* This helps with experimenting with standard kernels.
|
|
*/
|
|
{
|
|
ulong tim;
|
|
|
|
tim = rtc_mktime(tmp);
|
|
|
|
immap->im_sitk.sitk_rtck = KAPWR_KEY;
|
|
immap->im_sit.sit_rtc = tim;
|
|
}
|
|
|
|
debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Initialize Port B for software SPI */
|
|
static void init_spi (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
/* Force output pins to begin at logic 0 */
|
|
immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
|
|
|
|
/* Set these 3 signals as outputs */
|
|
immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
|
|
|
|
immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */
|
|
udelay (10);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
|
|
static void soft_spi_send (unsigned char n)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
unsigned char bitpos; /* bit position to receive */
|
|
unsigned char i; /* Loop Control */
|
|
|
|
/* bit position to send, start with most significant bit */
|
|
bitpos = 0x80;
|
|
|
|
/* Send 8 bits to software SPI */
|
|
for (i = 0; i < 8; i++) { /* Loop for 8 bits */
|
|
immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
|
|
|
|
if (n & bitpos)
|
|
immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */
|
|
else
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */
|
|
udelay (10);
|
|
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
|
|
udelay (10);
|
|
|
|
bitpos >>= 1; /* Shift for next bit position */
|
|
}
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
|
|
static unsigned char soft_spi_read (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
unsigned char spi_byte = 0; /* Return value, assume success */
|
|
unsigned char bitpos; /* bit position to receive */
|
|
unsigned char i; /* Loop Control */
|
|
|
|
/* bit position to receive, start with most significant bit */
|
|
bitpos = 0x80;
|
|
|
|
/* Read 8 bits here */
|
|
for (i = 0; i < 8; i++) { /* Do 8 bits in loop */
|
|
immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
|
|
udelay (10);
|
|
if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */
|
|
spi_byte |= bitpos; /* Set data accordingly */
|
|
immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
|
|
udelay (10);
|
|
bitpos >>= 1; /* Shift for next bit position */
|
|
}
|
|
|
|
return spi_byte; /* Return the byte read */
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void rtc_reset (void)
|
|
{
|
|
return; /* nothing to do */
|
|
}
|
|
|
|
#else /* not CONFIG_SXNI855T */
|
|
/* ************************************************************************* */
|
|
|
|
static unsigned char rtc_read (unsigned char reg);
|
|
static void rtc_write (unsigned char reg, unsigned char val);
|
|
|
|
static struct spi_slave *slave;
|
|
|
|
/* read clock time from DS1306 and return it in *tmp */
|
|
int rtc_get (struct rtc_time *tmp)
|
|
{
|
|
unsigned char sec, min, hour, mday, wday, mon, year;
|
|
|
|
/*
|
|
* Assuming Vcc = 2.0V (lowest speed)
|
|
*
|
|
* REVISIT: If we add an rtc_init() function we can do this
|
|
* step just once.
|
|
*/
|
|
if (!slave) {
|
|
slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
|
|
SPI_MODE_3 | SPI_CS_HIGH);
|
|
if (!slave)
|
|
return;
|
|
}
|
|
|
|
if (spi_claim_bus(slave))
|
|
return;
|
|
|
|
sec = rtc_read (RTC_SECONDS);
|
|
min = rtc_read (RTC_MINUTES);
|
|
hour = rtc_read (RTC_HOURS);
|
|
mday = rtc_read (RTC_DATE_OF_MONTH);
|
|
wday = rtc_read (RTC_DAY_OF_WEEK);
|
|
mon = rtc_read (RTC_MONTH);
|
|
year = rtc_read (RTC_YEAR);
|
|
|
|
spi_release_bus(slave);
|
|
|
|
debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
|
|
"hr: %02x min: %02x sec: %02x\n",
|
|
year, mon, mday, wday, hour, min, sec);
|
|
debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n",
|
|
rtc_read (RTC_DAY_OF_WEEK_ALARM0),
|
|
rtc_read (RTC_HOURS_ALARM0),
|
|
rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0));
|
|
debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n",
|
|
rtc_read (RTC_DAY_OF_WEEK_ALARM1),
|
|
rtc_read (RTC_HOURS_ALARM1),
|
|
rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1));
|
|
|
|
tmp->tm_sec = bcd2bin (sec & 0x7F); /* convert Seconds */
|
|
tmp->tm_min = bcd2bin (min & 0x7F); /* convert Minutes */
|
|
|
|
/* convert Hours */
|
|
tmp->tm_hour = (hour & 0x40)
|
|
? ((hour & 0x20) /* 12 hour mode */
|
|
? bcd2bin (hour & 0x1F) + 11 /* PM */
|
|
: bcd2bin (hour & 0x1F) - 1 /* AM */
|
|
)
|
|
: bcd2bin (hour & 0x3F); /* 24 hour mode */
|
|
|
|
tmp->tm_mday = bcd2bin (mday & 0x3F); /* convert Day of the Month */
|
|
tmp->tm_mon = bcd2bin (mon & 0x1F); /* convert Month */
|
|
tmp->tm_year = bcd2bin (year) + 2000; /* convert Year */
|
|
tmp->tm_wday = bcd2bin (wday & 0x07) - 1; /* convert Day of the Week */
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst = 0;
|
|
|
|
debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* set clock time from *tmp in DS1306 RTC */
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
/* Assuming Vcc = 2.0V (lowest speed) */
|
|
if (!slave) {
|
|
slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
|
|
SPI_MODE_3 | SPI_CS_HIGH);
|
|
if (!slave)
|
|
return;
|
|
}
|
|
|
|
if (spi_claim_bus(slave))
|
|
return;
|
|
|
|
debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec));
|
|
rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min));
|
|
rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour));
|
|
rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1));
|
|
rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
|
|
rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
|
|
rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
|
|
|
|
spi_release_bus(slave);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* reset the DS1306 */
|
|
void rtc_reset (void)
|
|
{
|
|
/* Assuming Vcc = 2.0V (lowest speed) */
|
|
if (!slave) {
|
|
slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
|
|
SPI_MODE_3 | SPI_CS_HIGH);
|
|
if (!slave)
|
|
return;
|
|
}
|
|
|
|
if (spi_claim_bus(slave))
|
|
return;
|
|
|
|
/* clear the control register */
|
|
rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */
|
|
rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */
|
|
|
|
/* reset all alarms */
|
|
rtc_write (RTC_SECONDS_ALARM0, 0x00);
|
|
rtc_write (RTC_SECONDS_ALARM1, 0x00);
|
|
rtc_write (RTC_MINUTES_ALARM0, 0x00);
|
|
rtc_write (RTC_MINUTES_ALARM1, 0x00);
|
|
rtc_write (RTC_HOURS_ALARM0, 0x00);
|
|
rtc_write (RTC_HOURS_ALARM1, 0x00);
|
|
rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
|
|
rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
|
|
|
|
spi_release_bus(slave);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static unsigned char rtc_read (unsigned char reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = spi_w8r8(slave, reg);
|
|
return ret < 0 ? 0 : ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void rtc_write (unsigned char reg, unsigned char val)
|
|
{
|
|
unsigned char dout[2]; /* SPI Output Data Bytes */
|
|
unsigned char din[2]; /* SPI Input Data Bytes */
|
|
|
|
dout[0] = 0x80 | reg;
|
|
dout[1] = val;
|
|
|
|
spi_xfer (slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
|
|
|
|
#endif
|
|
|