upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
477 lines
14 KiB
477 lines
14 KiB
/*
|
|
* (C) Copyright 2005 Embedded Alley Solutions, Inc.
|
|
* Dan Malek <dan@embeddedalley.com>
|
|
* Copied from STx GP3.
|
|
* Updates for Silicon Tx GP3 SSA board.
|
|
*
|
|
* (C) Copyright 2002,2003 Motorola,Inc.
|
|
* Xianghua Xiao <X.Xiao@motorola.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/* mpc8560ads board configuration file */
|
|
/* please refer to doc/README.mpc85xx for more info */
|
|
/* make sure you change the MAC address and other network params first,
|
|
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_BOOKE 1 /* BOOKE */
|
|
#define CONFIG_E500 1 /* BOOKE e500 family */
|
|
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
|
#define CONFIG_CPM2 1 /* has CPM2 */
|
|
#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
|
|
|
|
#define CONFIG_PCI /* PCI ethernet support */
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
|
|
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
|
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
|
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
|
|
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
|
|
|
|
|
/* sysclk for MPC85xx
|
|
*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
|
|
|
|
/* Blinkin' LEDs for Robert :-)
|
|
*/
|
|
#define CONFIG_SHOW_ACTIVITY 1
|
|
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
|
|
|
#undef CFG_DRAM_TEST /* memory test, takes time */
|
|
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
|
|
#define CFG_MEMTEST_END 0x00400000
|
|
|
|
|
|
/* Localbus connector. There are many options that can be
|
|
* connected here, including sdram or lots of flash.
|
|
* This address, however, is used to configure a 256M local bus
|
|
* window that includes the Config latch below.
|
|
*/
|
|
#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */
|
|
#define CFG_LBC_OPTION_SIZE 256 /* 256MB */
|
|
|
|
/* There are various flash options used, we configure for the largest,
|
|
* which is 64Mbytes. The CFI works fine and will discover the proper
|
|
* sizes.
|
|
*/
|
|
#ifdef CONFIG_STXSSA_4M
|
|
#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */
|
|
#else
|
|
#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */
|
|
#endif
|
|
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */
|
|
#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7)
|
|
|
|
#define CFG_FLASH_CFI 1
|
|
#define CFG_FLASH_CFI_DRIVER 1
|
|
#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
|
|
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
|
|
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
|
|
|
#define CFG_FLASH_PROTECTION
|
|
|
|
/* The configuration latch is Chip Select 1.
|
|
* It's an 8-bit latch in the lower 8 bits of the word.
|
|
*/
|
|
#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */
|
|
#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */
|
|
#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
|
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
#define CFG_RAMBOOT
|
|
#else
|
|
#undef CFG_RAMBOOT
|
|
#endif
|
|
|
|
#ifdef CFG_RAMBOOT
|
|
#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
|
|
#else
|
|
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
|
#endif
|
|
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
|
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
|
|
|
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
|
|
/*
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*/
|
|
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
|
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
|
|
|
#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
|
|
|
|
#undef CONFIG_CLOCKS_IN_MHZ
|
|
|
|
/* local bus definitions */
|
|
#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
|
|
#define CFG_OR2_PRELIM 0xfc006901
|
|
#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
|
|
#define CFG_LBC_LBCR 0x00000000
|
|
#define CFG_LBC_LSRT 0x20000000
|
|
#define CFG_LBC_MRTPR 0x20000000
|
|
#define CFG_LBC_LSDMR_1 0x2861b723
|
|
#define CFG_LBC_LSDMR_2 0x0861b723
|
|
#define CFG_LBC_LSDMR_3 0x0861b723
|
|
#define CFG_LBC_LSDMR_4 0x1861b723
|
|
#define CFG_LBC_LSDMR_5 0x4061b723
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
#define CFG_INIT_RAM_LOCK 1
|
|
#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
|
|
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
|
|
|
/* Serial Port */
|
|
#define CONFIG_CONS_INDEX 2
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
#define CFG_NS16550_CLK get_bus_freq(0)
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
|
|
#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
/* I2C */
|
|
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
#if 0
|
|
#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
|
|
#else
|
|
/* I did the 'if 0' so we could keep the syntax above if ever needed. */
|
|
#undef CFG_I2C_NOPROBES
|
|
#endif
|
|
#define CFG_I2C_OFFSET 0x3000
|
|
|
|
/* I2C EEPROM. AT24C32, we keep our environment in here.
|
|
*/
|
|
#define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 2
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
|
|
/*
|
|
* Standard 8555 PCI mapping.
|
|
* Addresses are mapped 1-1.
|
|
*/
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CFG_PCI1_IO_BASE 0x00000000
|
|
#define CFG_PCI1_IO_PHYS 0xe2000000
|
|
#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
|
|
|
|
#define CFG_PCI2_MEM_BASE 0xa0000000
|
|
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
|
|
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CFG_PCI2_IO_BASE 0x00000000
|
|
#define CFG_PCI2_IO_PHYS 0xe3000000
|
|
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
|
|
|
|
#if defined(CONFIG_PCI) /* PCI Ethernet card */
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#define CONFIG_EEPRO100
|
|
#define CONFIG_TULIP
|
|
|
|
#if !defined(CONFIG_PCI_PNP)
|
|
#define PCI_ENET0_IOADDR 0xe0000000
|
|
#define PCI_ENET0_MEMADDR 0xe0000000
|
|
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
|
#endif
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
|
|
#ifndef CONFIG_NET_MULTI
|
|
#define CONFIG_NET_MULTI 1
|
|
#endif
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
#define CONFIG_MPS85XX_FEC
|
|
|
|
#define TSEC1_PHY_ADDR 2
|
|
#define TSEC2_PHY_ADDR 4
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define CONFIG_ETHPRIME "TSEC0"
|
|
|
|
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
|
|
|
|
#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
|
|
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
|
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
|
|
|
|
#if (CONFIG_ETHER_INDEX == 2)
|
|
/*
|
|
* - Rx-CLK is CLK13
|
|
* - Tx-CLK is CLK14
|
|
* - Select bus for bd/buffers
|
|
* - Full duplex
|
|
*/
|
|
#define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
|
|
#define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
|
|
#define CFG_CPMFCR_RAMTYPE 0
|
|
#if 0
|
|
#define CFG_FCC_PSMR (FCC_PSMR_FDE)
|
|
#else
|
|
#define CFG_FCC_PSMR 0
|
|
#endif
|
|
#define FETH2_RST 0x01
|
|
#elif (CONFIG_ETHER_INDEX == 3)
|
|
/* need more definitions here for FE3 */
|
|
#define FETH3_RST 0x80
|
|
#endif /* CONFIG_ETHER_INDEX */
|
|
|
|
/* MDIO is done through the TSEC0 control.
|
|
*/
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#undef CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
|
|
|
#endif
|
|
|
|
/* Environment - default config is in flash, see below */
|
|
#if 0 /* in EEPROM */
|
|
# define CFG_ENV_IS_IN_EEPROM 1
|
|
# define CFG_ENV_OFFSET 0
|
|
# define CFG_ENV_SIZE 2048
|
|
#else /* in flash */
|
|
# define CFG_ENV_IS_IN_FLASH 1
|
|
# ifdef CONFIG_STXSSA_4M
|
|
# define CFG_ENV_SECT_SIZE 0x20000
|
|
# else /* default configuration - 64 MiB flash */
|
|
# define CFG_ENV_SECT_SIZE 0x40000
|
|
# endif
|
|
# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
|
|
# define CFG_ENV_SIZE 0x4000
|
|
# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
|
|
# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with ts */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_I2C
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
|
#define CONFIG_CMD_MII
|
|
#endif
|
|
|
|
#if defined(CFG_RAMBOOT)
|
|
#undef CONFIG_CMD_ENV
|
|
#undef CONFIG_CMD_LOADS
|
|
#else
|
|
#define CONFIG_CMD_ELF
|
|
#endif
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "SSA=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/* Cache Configuration */
|
|
#define CFG_DCACHE_SIZE 32768
|
|
#define CFG_CACHELINE_SIZE 32
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*Note: change below for your network setting!!! */
|
|
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
|
#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
|
|
#define CONFIG_HAS_ETH2
|
|
#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
|
|
#endif
|
|
|
|
/*
|
|
* Environment in EEPROM is compatible with different flash sector sizes,
|
|
* but only little space is available, so we use a very simple setup.
|
|
* With environment in flash, we use a more powerful default configuration.
|
|
*/
|
|
#ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */
|
|
|
|
#define CONFIG_BAUDRATE 38400
|
|
|
|
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
|
|
#define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000"
|
|
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
|
|
#define CONFIG_SERVERIP 192.168.85.1
|
|
#define CONFIG_IPADDR 192.168.85.60
|
|
#define CONFIG_GATEWAYIP 192.168.85.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_HOSTNAME STX_SSA
|
|
#define CONFIG_ROOTPATH /gppproot
|
|
#define CONFIG_BOOTFILE uImage
|
|
#define CONFIG_LOADADDR 0x1000000
|
|
|
|
#else /* ENV IS IN FLASH -- use a full-blown envionment */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hostname=gp3ssa\0" \
|
|
"bootfile=/tftpboot/gp3ssa/uImage\0" \
|
|
"loadaddr=400000\0" \
|
|
"netdev=eth0\0" \
|
|
"consdev=ttyS1\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask" \
|
|
":$hostname:$netdev:off panic=1\0" \
|
|
"addcons=setenv bootargs $bootargs " \
|
|
"console=$consdev,$baudrate\0" \
|
|
"flash_nfs=run nfsargs addip addcons;" \
|
|
"bootm $kernel_addr\0" \
|
|
"flash_self=run ramargs addip addcons;" \
|
|
"bootm $kernel_addr $ramdisk_addr\0" \
|
|
"net_nfs=tftp $loadaddr $bootfile;" \
|
|
"run nfsargs addip addcons;bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_85xx\0" \
|
|
"kernel_addr=FC000000\0" \
|
|
"ramdisk_addr=FC200000\0" \
|
|
""
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
#endif /* CFG_ENV_IS_IN_EEPROM */
|
|
|
|
#endif /* __CONFIG_H */
|
|
|