upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/zynq_gem.c

729 lines
20 KiB

/*
* (C) Copyright 2011 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
* Based on Xilinx gmac driver:
* (C) Copyright 2011 Xilinx
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <net.h>
#include <netdev.h>
#include <config.h>
#include <console.h>
#include <malloc.h>
#include <asm/io.h>
#include <phy.h>
#include <miiphy.h>
#include <wait_bit.h>
#include <watchdog.h>
#include <asm/system.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <linux/errno.h>
DECLARE_GLOBAL_DATA_PTR;
/* Bit/mask specification */
#define ZYNQ_GEM_PHYMNTNC_OP_MASK 0x40020000 /* operation mask bits */
#define ZYNQ_GEM_PHYMNTNC_OP_R_MASK 0x20000000 /* read operation */
#define ZYNQ_GEM_PHYMNTNC_OP_W_MASK 0x10000000 /* write operation */
#define ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK 23 /* Shift bits for PHYAD */
#define ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK 18 /* Shift bits for PHREG */
#define ZYNQ_GEM_RXBUF_EOF_MASK 0x00008000 /* End of frame. */
#define ZYNQ_GEM_RXBUF_SOF_MASK 0x00004000 /* Start of frame. */
#define ZYNQ_GEM_RXBUF_LEN_MASK 0x00003FFF /* Mask for length field */
#define ZYNQ_GEM_RXBUF_WRAP_MASK 0x00000002 /* Wrap bit, last BD */
#define ZYNQ_GEM_RXBUF_NEW_MASK 0x00000001 /* Used bit.. */
#define ZYNQ_GEM_RXBUF_ADD_MASK 0xFFFFFFFC /* Mask for address */
/* Wrap bit, last descriptor */
#define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000
#define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */
#define ZYNQ_GEM_TXBUF_USED_MASK 0x80000000 /* Used by Hw */
#define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */
#define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */
#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
#define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */
#define ZYNQ_GEM_NWCFG_SPEED100 0x00000001 /* 100 Mbps operation */
#define ZYNQ_GEM_NWCFG_SPEED1000 0x00000400 /* 1Gbps operation */
#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */
#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */
#define ZYNQ_GEM_NWCFG_SGMII_ENBL 0x08000000 /* SGMII Enable */
#define ZYNQ_GEM_NWCFG_PCS_SEL 0x00000800 /* PCS select */
#ifdef CONFIG_ARM64
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x00100000 /* Div pclk by 64, max 160MHz */
#else
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000c0000 /* Div pclk by 48, max 120MHz */
#endif
#ifdef CONFIG_ARM64
# define ZYNQ_GEM_DBUS_WIDTH (1 << 21) /* 64 bit bus */
#else
# define ZYNQ_GEM_DBUS_WIDTH (0 << 21) /* 32 bit bus */
#endif
#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_DBUS_WIDTH | \
ZYNQ_GEM_NWCFG_FDEN | \
ZYNQ_GEM_NWCFG_FSREM | \
ZYNQ_GEM_NWCFG_MDCCLKDIV)
#define ZYNQ_GEM_NWSR_MDIOIDLE_MASK 0x00000004 /* PHY management idle */
#define ZYNQ_GEM_DMACR_BLENGTH 0x00000004 /* INCR4 AHB bursts */
/* Use full configured addressable space (8 Kb) */
#define ZYNQ_GEM_DMACR_RXSIZE 0x00000300
/* Use full configured addressable space (4 Kb) */
#define ZYNQ_GEM_DMACR_TXSIZE 0x00000400
/* Set with binary 00011000 to use 1536 byte(1*max length frame/buffer) */
#define ZYNQ_GEM_DMACR_RXBUF 0x00180000
#define ZYNQ_GEM_DMACR_INIT (ZYNQ_GEM_DMACR_BLENGTH | \
ZYNQ_GEM_DMACR_RXSIZE | \
ZYNQ_GEM_DMACR_TXSIZE | \
ZYNQ_GEM_DMACR_RXBUF)
#define ZYNQ_GEM_TSR_DONE 0x00000020 /* Tx done mask */
#define ZYNQ_GEM_PCS_CTL_ANEG_ENBL 0x1000
/* Use MII register 1 (MII status register) to detect PHY */
#define PHY_DETECT_REG 1
/* Mask used to verify certain PHY features (or register contents)
* in the register above:
* 0x1000: 10Mbps full duplex support
* 0x0800: 10Mbps half duplex support
* 0x0008: Auto-negotiation support
*/
#define PHY_DETECT_MASK 0x1808
/* TX BD status masks */
#define ZYNQ_GEM_TXBUF_FRMLEN_MASK 0x000007ff
#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000
#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000
/* Clock frequencies for different speeds */
#define ZYNQ_GEM_FREQUENCY_10 2500000UL
#define ZYNQ_GEM_FREQUENCY_100 25000000UL
#define ZYNQ_GEM_FREQUENCY_1000 125000000UL
/* Device registers */
struct zynq_gem_regs {
u32 nwctrl; /* 0x0 - Network Control reg */
u32 nwcfg; /* 0x4 - Network Config reg */
u32 nwsr; /* 0x8 - Network Status reg */
u32 reserved1;
u32 dmacr; /* 0x10 - DMA Control reg */
u32 txsr; /* 0x14 - TX Status reg */
u32 rxqbase; /* 0x18 - RX Q Base address reg */
u32 txqbase; /* 0x1c - TX Q Base address reg */
u32 rxsr; /* 0x20 - RX Status reg */
u32 reserved2[2];
u32 idr; /* 0x2c - Interrupt Disable reg */
u32 reserved3;
u32 phymntnc; /* 0x34 - Phy Maintaince reg */
u32 reserved4[18];
u32 hashl; /* 0x80 - Hash Low address reg */
u32 hashh; /* 0x84 - Hash High address reg */
#define LADDR_LOW 0
#define LADDR_HIGH 1
u32 laddr[4][LADDR_HIGH + 1]; /* 0x8c - Specific1 addr low/high reg */
u32 match[4]; /* 0xa8 - Type ID1 Match reg */
u32 reserved6[18];
#define STAT_SIZE 44
u32 stat[STAT_SIZE]; /* 0x100 - Octects transmitted Low reg */
u32 reserved9[20];
u32 pcscntrl;
u32 reserved7[143];
u32 transmit_q1_ptr; /* 0x440 - Transmit priority queue 1 */
u32 reserved8[15];
u32 receive_q1_ptr; /* 0x480 - Receive priority queue 1 */
};
/* BD descriptors */
struct emac_bd {
u32 addr; /* Next descriptor pointer */
u32 status;
};
#define RX_BUF 32
/* Page table entries are set to 1MB, or multiples of 1MB
* (not < 1MB). driver uses less bd's so use 1MB bdspace.
*/
#define BD_SPACE 0x100000
/* BD separation space */
#define BD_SEPRN_SPACE (RX_BUF * sizeof(struct emac_bd))
/* Setup the first free TX descriptor */
#define TX_FREE_DESC 2
/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
struct zynq_gem_priv {
struct emac_bd *tx_bd;
struct emac_bd *rx_bd;
char *rxbuffers;
u32 rxbd_current;
u32 rx_first_buf;
int phyaddr;
int init;
struct zynq_gem_regs *iobase;
phy_interface_t interface;
struct phy_device *phydev;
int phy_of_handle;
struct mii_dev *bus;
struct clk clk;
};
static u32 phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum,
u32 op, u16 *data)
{
u32 mgtcr;
struct zynq_gem_regs *regs = priv->iobase;
int err;
err = wait_for_bit(__func__, &regs->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
true, 20000, true);
if (err)
return err;
/* Construct mgtcr mask for the operation */
mgtcr = ZYNQ_GEM_PHYMNTNC_OP_MASK | op |
(phy_addr << ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK) |
(regnum << ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK) | *data;
/* Write mgtcr and wait for completion */
writel(mgtcr, &regs->phymntnc);
err = wait_for_bit(__func__, &regs->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
true, 20000, true);
if (err)
return err;
if (op == ZYNQ_GEM_PHYMNTNC_OP_R_MASK)
*data = readl(&regs->phymntnc);
return 0;
}
static u32 phyread(struct zynq_gem_priv *priv, u32 phy_addr,
u32 regnum, u16 *val)
{
u32 ret;
ret = phy_setup_op(priv, phy_addr, regnum,
ZYNQ_GEM_PHYMNTNC_OP_R_MASK, val);
if (!ret)
debug("%s: phy_addr %d, regnum 0x%x, val 0x%x\n", __func__,
phy_addr, regnum, *val);
return ret;
}
static u32 phywrite(struct zynq_gem_priv *priv, u32 phy_addr,
u32 regnum, u16 data)
{
debug("%s: phy_addr %d, regnum 0x%x, data 0x%x\n", __func__, phy_addr,
regnum, data);
return phy_setup_op(priv, phy_addr, regnum,
ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data);
}
static int phy_detection(struct udevice *dev)
{
int i;
u16 phyreg;
struct zynq_gem_priv *priv = dev->priv;
if (priv->phyaddr != -1) {
phyread(priv, priv->phyaddr, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
debug("Default phy address %d is valid\n",
priv->phyaddr);
return 0;
} else {
debug("PHY address is not setup correctly %d\n",
priv->phyaddr);
priv->phyaddr = -1;
}
}
debug("detecting phy address\n");
if (priv->phyaddr == -1) {
/* detect the PHY address */
for (i = 31; i >= 0; i--) {
phyread(priv, i, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
priv->phyaddr = i;
debug("Found valid phy address, %d\n", i);
return 0;
}
}
}
printf("PHY is not detected\n");
return -1;
}
static int zynq_gem_setup_mac(struct udevice *dev)
{
u32 i, macaddrlow, macaddrhigh;
struct eth_pdata *pdata = dev_get_platdata(dev);
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
/* Set the MAC bits [31:0] in BOT */
macaddrlow = pdata->enetaddr[0];
macaddrlow |= pdata->enetaddr[1] << 8;
macaddrlow |= pdata->enetaddr[2] << 16;
macaddrlow |= pdata->enetaddr[3] << 24;
/* Set MAC bits [47:32] in TOP */
macaddrhigh = pdata->enetaddr[4];
macaddrhigh |= pdata->enetaddr[5] << 8;
for (i = 0; i < 4; i++) {
writel(0, &regs->laddr[i][LADDR_LOW]);
writel(0, &regs->laddr[i][LADDR_HIGH]);
/* Do not use MATCHx register */
writel(0, &regs->match[i]);
}
writel(macaddrlow, &regs->laddr[0][LADDR_LOW]);
writel(macaddrhigh, &regs->laddr[0][LADDR_HIGH]);
return 0;
}
static int zynq_phy_init(struct udevice *dev)
{
int ret;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
const u32 supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
/* Enable only MDIO bus */
writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, &regs->nwctrl);
if (priv->interface != PHY_INTERFACE_MODE_SGMII) {
ret = phy_detection(dev);
if (ret) {
printf("GEM PHY init failed\n");
return ret;
}
}
priv->phydev = phy_connect(priv->bus, priv->phyaddr, dev,
priv->interface);
if (!priv->phydev)
return -ENODEV;
priv->phydev->supported &= supported | ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
priv->phydev->advertising = priv->phydev->supported;
if (priv->phy_of_handle > 0)
dev_set_of_offset(priv->phydev->dev, priv->phy_of_handle);
return phy_config(priv->phydev);
}
static int zynq_gem_init(struct udevice *dev)
{
u32 i, nwconfig;
int ret;
unsigned long clk_rate = 0;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
struct emac_bd *dummy_tx_bd = &priv->tx_bd[TX_FREE_DESC];
struct emac_bd *dummy_rx_bd = &priv->tx_bd[TX_FREE_DESC + 2];
if (!priv->init) {
/* Disable all interrupts */
writel(0xFFFFFFFF, &regs->idr);
/* Disable the receiver & transmitter */
writel(0, &regs->nwctrl);
writel(0, &regs->txsr);
writel(0, &regs->rxsr);
writel(0, &regs->phymntnc);
/* Clear the Hash registers for the mac address
* pointed by AddressPtr
*/
writel(0x0, &regs->hashl);
/* Write bits [63:32] in TOP */
writel(0x0, &regs->hashh);
/* Clear all counters */
for (i = 0; i < STAT_SIZE; i++)
readl(&regs->stat[i]);
/* Setup RxBD space */
memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd));
for (i = 0; i < RX_BUF; i++) {
priv->rx_bd[i].status = 0xF0000000;
priv->rx_bd[i].addr =
((ulong)(priv->rxbuffers) +
(i * PKTSIZE_ALIGN));
}
/* WRAP bit to last BD */
priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
/* Write RxBDs to IP */
writel((ulong)priv->rx_bd, &regs->rxqbase);
/* Setup for DMA Configuration register */
writel(ZYNQ_GEM_DMACR_INIT, &regs->dmacr);
/* Setup for Network Control register, MDIO, Rx and Tx enable */
setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
/* Disable the second priority queue */
dummy_tx_bd->addr = 0;
dummy_tx_bd->status = ZYNQ_GEM_TXBUF_WRAP_MASK |
ZYNQ_GEM_TXBUF_LAST_MASK|
ZYNQ_GEM_TXBUF_USED_MASK;
dummy_rx_bd->addr = ZYNQ_GEM_RXBUF_WRAP_MASK |
ZYNQ_GEM_RXBUF_NEW_MASK;
dummy_rx_bd->status = 0;
flush_dcache_range((ulong)&dummy_tx_bd, (ulong)&dummy_tx_bd +
sizeof(dummy_tx_bd));
flush_dcache_range((ulong)&dummy_rx_bd, (ulong)&dummy_rx_bd +
sizeof(dummy_rx_bd));
writel((ulong)dummy_tx_bd, &regs->transmit_q1_ptr);
writel((ulong)dummy_rx_bd, &regs->receive_q1_ptr);
priv->init++;
}
ret = phy_startup(priv->phydev);
if (ret)
return ret;
if (!priv->phydev->link) {
printf("%s: No link.\n", priv->phydev->dev->name);
return -1;
}
nwconfig = ZYNQ_GEM_NWCFG_INIT;
if (priv->interface == PHY_INTERFACE_MODE_SGMII) {
nwconfig |= ZYNQ_GEM_NWCFG_SGMII_ENBL |
ZYNQ_GEM_NWCFG_PCS_SEL;
#ifdef CONFIG_ARM64
writel(readl(&regs->pcscntrl) | ZYNQ_GEM_PCS_CTL_ANEG_ENBL,
&regs->pcscntrl);
#endif
}
switch (priv->phydev->speed) {
case SPEED_1000:
writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED1000,
&regs->nwcfg);
clk_rate = ZYNQ_GEM_FREQUENCY_1000;
break;
case SPEED_100:
writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED100,
&regs->nwcfg);
clk_rate = ZYNQ_GEM_FREQUENCY_100;
break;
case SPEED_10:
clk_rate = ZYNQ_GEM_FREQUENCY_10;
break;
}
ret = clk_set_rate(&priv->clk, clk_rate);
if (IS_ERR_VALUE(ret) && ret != (unsigned long)-ENOSYS) {
dev_err(dev, "failed to set tx clock rate\n");
return ret;
}
ret = clk_enable(&priv->clk);
if (ret && ret != -ENOSYS) {
dev_err(dev, "failed to enable tx clock\n");
return ret;
}
setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
ZYNQ_GEM_NWCTRL_TXEN_MASK);
return 0;
}
static int zynq_gem_send(struct udevice *dev, void *ptr, int len)
{
u32 addr, size;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
struct emac_bd *current_bd = &priv->tx_bd[1];
/* Setup Tx BD */
memset(priv->tx_bd, 0, sizeof(struct emac_bd));
priv->tx_bd->addr = (ulong)ptr;
priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) |
ZYNQ_GEM_TXBUF_LAST_MASK;
/* Dummy descriptor to mark it as the last in descriptor chain */
current_bd->addr = 0x0;
current_bd->status = ZYNQ_GEM_TXBUF_WRAP_MASK |
ZYNQ_GEM_TXBUF_LAST_MASK|
ZYNQ_GEM_TXBUF_USED_MASK;
/* setup BD */
writel((ulong)priv->tx_bd, &regs->txqbase);
addr = (ulong) ptr;
addr &= ~(ARCH_DMA_MINALIGN - 1);
size = roundup(len, ARCH_DMA_MINALIGN);
flush_dcache_range(addr, addr + size);
addr = (ulong)priv->rxbuffers;
addr &= ~(ARCH_DMA_MINALIGN - 1);
size = roundup((RX_BUF * PKTSIZE_ALIGN), ARCH_DMA_MINALIGN);
flush_dcache_range(addr, addr + size);
barrier();
/* Start transmit */
setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK);
/* Read TX BD status */
if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED)
printf("TX buffers exhausted in mid frame\n");
return wait_for_bit(__func__, &regs->txsr, ZYNQ_GEM_TSR_DONE,
true, 20000, true);
}
/* Do not check frame_recd flag in rx_status register 0x20 - just poll BD */
static int zynq_gem_recv(struct udevice *dev, int flags, uchar **packetp)
{
int frame_len;
u32 addr;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct emac_bd *current_bd = &priv->rx_bd[priv->rxbd_current];
if (!(current_bd->addr & ZYNQ_GEM_RXBUF_NEW_MASK))
return -1;
if (!(current_bd->status &
(ZYNQ_GEM_RXBUF_SOF_MASK | ZYNQ_GEM_RXBUF_EOF_MASK))) {
printf("GEM: SOF or EOF not set for last buffer received!\n");
return -1;
}
frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK;
if (!frame_len) {
printf("%s: Zero size packet?\n", __func__);
return -1;
}
addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK;
addr &= ~(ARCH_DMA_MINALIGN - 1);
*packetp = (uchar *)(uintptr_t)addr;
return frame_len;
}
static int zynq_gem_free_pkt(struct udevice *dev, uchar *packet, int length)
{
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct emac_bd *current_bd = &priv->rx_bd[priv->rxbd_current];
struct emac_bd *first_bd;
if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK) {
priv->rx_first_buf = priv->rxbd_current;
} else {
current_bd->addr &= ~ZYNQ_GEM_RXBUF_NEW_MASK;
current_bd->status = 0xF0000000; /* FIXME */
}
if (current_bd->status & ZYNQ_GEM_RXBUF_EOF_MASK) {
first_bd = &priv->rx_bd[priv->rx_first_buf];
first_bd->addr &= ~ZYNQ_GEM_RXBUF_NEW_MASK;
first_bd->status = 0xF0000000;
}
if ((++priv->rxbd_current) >= RX_BUF)
priv->rxbd_current = 0;
return 0;
}
static void zynq_gem_halt(struct udevice *dev)
{
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
clrsetbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
ZYNQ_GEM_NWCTRL_TXEN_MASK, 0);
}
__weak int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
return -ENOSYS;
}
static int zynq_gem_read_rom_mac(struct udevice *dev)
{
int retval;
struct eth_pdata *pdata = dev_get_platdata(dev);
retval = zynq_board_read_rom_ethaddr(pdata->enetaddr);
if (retval == -ENOSYS)
retval = 0;
return retval;
}
static int zynq_gem_miiphy_read(struct mii_dev *bus, int addr,
int devad, int reg)
{
struct zynq_gem_priv *priv = bus->priv;
int ret;
u16 val;
ret = phyread(priv, addr, reg, &val);
debug("%s 0x%x, 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, val, ret);
return val;
}
static int zynq_gem_miiphy_write(struct mii_dev *bus, int addr, int devad,
int reg, u16 value)
{
struct zynq_gem_priv *priv = bus->priv;
debug("%s 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, value);
return phywrite(priv, addr, reg, value);
}
static int zynq_gem_probe(struct udevice *dev)
{
void *bd_space;
struct zynq_gem_priv *priv = dev_get_priv(dev);
int ret;
/* Align rxbuffers to ARCH_DMA_MINALIGN */
priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN);
memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN);
/* Align bd_space to MMU_SECTION_SHIFT */
bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
mmu_set_region_dcache_behaviour((phys_addr_t)bd_space,
BD_SPACE, DCACHE_OFF);
/* Initialize the bd spaces for tx and rx bd's */
priv->tx_bd = (struct emac_bd *)bd_space;
priv->rx_bd = (struct emac_bd *)((ulong)bd_space + BD_SEPRN_SPACE);
ret = clk_get_by_name(dev, "tx_clk", &priv->clk);
if (ret < 0) {
dev_err(dev, "failed to get clock\n");
return -EINVAL;
}
priv->bus = mdio_alloc();
priv->bus->read = zynq_gem_miiphy_read;
priv->bus->write = zynq_gem_miiphy_write;
priv->bus->priv = priv;
ret = mdio_register_seq(priv->bus, dev->seq);
if (ret)
return ret;
return zynq_phy_init(dev);
}
static int zynq_gem_remove(struct udevice *dev)
{
struct zynq_gem_priv *priv = dev_get_priv(dev);
free(priv->phydev);
mdio_unregister(priv->bus);
mdio_free(priv->bus);
return 0;
}
static const struct eth_ops zynq_gem_ops = {
.start = zynq_gem_init,
.send = zynq_gem_send,
.recv = zynq_gem_recv,
.free_pkt = zynq_gem_free_pkt,
.stop = zynq_gem_halt,
.write_hwaddr = zynq_gem_setup_mac,
.read_rom_hwaddr = zynq_gem_read_rom_mac,
};
static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct zynq_gem_priv *priv = dev_get_priv(dev);
int node = dev_of_offset(dev);
const char *phy_mode;
pdata->iobase = (phys_addr_t)dev_get_addr(dev);
priv->iobase = (struct zynq_gem_regs *)pdata->iobase;
/* Hardcode for now */
priv->phyaddr = -1;
priv->phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, node,
"phy-handle");
if (priv->phy_of_handle > 0)
priv->phyaddr = fdtdec_get_int(gd->fdt_blob,
priv->phy_of_handle, "reg", -1);
phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
if (phy_mode)
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
if (pdata->phy_interface == -1) {
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
return -EINVAL;
}
priv->interface = pdata->phy_interface;
printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase,
priv->phyaddr, phy_string_for_interface(priv->interface));
return 0;
}
static const struct udevice_id zynq_gem_ids[] = {
{ .compatible = "cdns,zynqmp-gem" },
{ .compatible = "cdns,zynq-gem" },
{ .compatible = "cdns,gem" },
{ }
};
U_BOOT_DRIVER(zynq_gem) = {
.name = "zynq_gem",
.id = UCLASS_ETH,
.of_match = zynq_gem_ids,
.ofdata_to_platdata = zynq_gem_ofdata_to_platdata,
.probe = zynq_gem_probe,
.remove = zynq_gem_remove,
.ops = &zynq_gem_ops,
.priv_auto_alloc_size = sizeof(struct zynq_gem_priv),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};