upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
362 lines
8.7 KiB
362 lines
8.7 KiB
/*
|
|
* (C) Copyright 2001-2003
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <sja1000.h>
|
|
|
|
#undef FPGA_DEBUG
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
/* fpga configuration data - gzip compressed and generated by bin2c */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
/*
|
|
* generate a short spike on the CAN tx line
|
|
* to bring the couplers in sync
|
|
*/
|
|
void init_coupler(u32 addr)
|
|
{
|
|
struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr;
|
|
|
|
/* reset */
|
|
out_8(&ctrl->cr, CR_RR);
|
|
|
|
/* dominant */
|
|
out_8(&ctrl->btr0, 0x00); /* btr setup is required */
|
|
out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */
|
|
out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 |
|
|
OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1);
|
|
out_8(&ctrl->cr, 0x00);
|
|
|
|
/* delay */
|
|
in_8(&ctrl->cr);
|
|
in_8(&ctrl->cr);
|
|
in_8(&ctrl->cr);
|
|
in_8(&ctrl->cr);
|
|
|
|
/* reset */
|
|
out_8(&ctrl->cr, CR_RR);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to
|
|
* 512 ebc-clks -> ca. 15 us
|
|
*/
|
|
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
unsigned char *dst;
|
|
unsigned char fctr;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
|
|
(uchar *)fpgadata, &len) != 0) {
|
|
printf("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: INIT not low "
|
|
"after asserting PROGRAM*)\n");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: INIT not high "
|
|
"after deasserting PROGRAM*)\n");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: DONE not high "
|
|
"after programming FPGA)\n");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i=20; i>0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index=0;index<1000;index++)
|
|
udelay(1000);
|
|
}
|
|
putc('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc('\n');
|
|
|
|
free(dst);
|
|
|
|
/*
|
|
* Reset FPGA via FPGA_DATA pin
|
|
*/
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK);
|
|
udelay(1000); /* wait 1ms */
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Reset external DUARTs
|
|
*/
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
|
|
udelay(10);
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
|
|
udelay(1000);
|
|
|
|
/*
|
|
* Set NAND-FLASH GPIO signals to default
|
|
*/
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) &
|
|
~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
|
|
|
|
/*
|
|
* Setup EEPROM write protection
|
|
*/
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
|
|
out_be32((void*)GPIO0_TCR,
|
|
in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
|
|
|
|
/*
|
|
* Enable interrupts in exar duart mcr[3]
|
|
*/
|
|
out_8((void *)DUART0_BA + 4, 0x08);
|
|
out_8((void *)DUART1_BA + 4, 0x08);
|
|
|
|
/*
|
|
* Enable auto RS485 mode in 2nd external uart
|
|
*/
|
|
out_8((void *)DUART1_BA + 3, 0xbf); /* write LCR */
|
|
fctr = in_8((void *)DUART1_BA + 1); /* read FCTR */
|
|
fctr |= 0x08; /* enable RS485 mode */
|
|
out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */
|
|
out_8((void *)DUART1_BA + 3, 0); /* write LCR */
|
|
|
|
/*
|
|
* Init magnetic couplers
|
|
*/
|
|
if (!getenv("noinitcoupler")) {
|
|
init_coupler(CAN0_BA);
|
|
init_coupler(CAN1_BA);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char str[64];
|
|
int i = getenv_r("serial#", str, sizeof(str));
|
|
|
|
puts("Board: ");
|
|
|
|
if (i == -1)
|
|
puts("### No HW ID - assuming PLU405");
|
|
else
|
|
puts(str);
|
|
|
|
putc('\n');
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_RESET
|
|
#define FPGA_CTRL (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
|
|
void ide_set_reset(int on)
|
|
{
|
|
/*
|
|
* Assert or deassert CompactFlash Reset Pin
|
|
*/
|
|
if (on) { /* assert RESET */
|
|
out_be16((void *)FPGA_CTRL,
|
|
in_be16((void *)FPGA_CTRL) &
|
|
~CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
} else { /* release RESET */
|
|
out_be16((void *)FPGA_CTRL,
|
|
in_be16((void *)FPGA_CTRL) |
|
|
CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
}
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_LXT971_NO_SLEEP
|
|
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
|
* <state> -1: deliver current state
|
|
* 0: disable write
|
|
* 1: enable write
|
|
* Returns: -1: wrong device address
|
|
* 0: dis-/en- able done
|
|
* 0/1: current state if <state> was -1.
|
|
*/
|
|
int eeprom_write_enable(unsigned dev_addr, int state)
|
|
{
|
|
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
|
|
return -1;
|
|
} else {
|
|
switch (state) {
|
|
case 1:
|
|
/* Enable write access, clear bit GPIO0. */
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) &
|
|
~CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
case 0:
|
|
/* Disable write access, set bit GPIO0. */
|
|
out_be32((void*)GPIO0_OR,
|
|
in_be32((void*)GPIO0_OR) |
|
|
CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
default:
|
|
/* Read current status back. */
|
|
state = ((in_be32((void*)GPIO0_OR) &
|
|
CONFIG_SYS_EEPROM_WP) == 0);
|
|
break;
|
|
}
|
|
}
|
|
return state;
|
|
}
|
|
|
|
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
int query = argc == 1;
|
|
int state = 0;
|
|
|
|
if (query) {
|
|
/* Query write access state. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
|
|
if (state < 0) {
|
|
puts("Query of write access state failed.\n");
|
|
} else {
|
|
printf("Write access for device 0x%0x is %sabled.\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
state ? "en" : "dis");
|
|
state = 0;
|
|
}
|
|
} else {
|
|
if (argv[1][0] == '0') {
|
|
/* Disable write access. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
0);
|
|
} else {
|
|
/* Enable write access. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
1);
|
|
}
|
|
if (state < 0)
|
|
puts("Setup of write access state failed.\n");
|
|
}
|
|
|
|
return state;
|
|
}
|
|
|
|
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|
"Enable / disable / query EEPROM write access",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
|
|
|