upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/logodl/logodl.c

122 lines
2.8 KiB

/*
* (C) 2002 Kyle Harris <kharris@nexus-tech.net>, Nexus Technologies, Inc.
* (C) 2002 Marius Groeger <mgroeger@sysgo.de>, Sysgo GmbH
* (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/pxa-regs.h>
DECLARE_GLOBAL_DATA_PTR;
/**
* board_init: - setup some data structures
*
* @return: 0 in case of success
*/
int board_init (void)
{
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
gd->bd->bi_arch_number = MACH_TYPE_LOGODL;
gd->bd->bi_boot_params = 0x08000100;
gd->bd->bi_baudrate = CONFIG_BAUDRATE;
(*((volatile short*)0x14800000)) = 0xff; /* power on eth0 */
(*((volatile short*)0x14000000)) = 0xff; /* power on uart */
return 0;
}
/**
* dram_init: - setup dynamic RAM
*
* @return: 0 in case of success
*/
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
/**
* logodl_set_led: - switch LEDs on or off
*
* @param led: LED to switch (0,1)
* @param state: switch on (1) or off (0)
*/
void logodl_set_led(int led, int state)
{
switch(led) {
case 0:
if (state==1) {
CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
} else if (state==0) {
CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
}
break;
case 1:
if (state==1) {
CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
} else if (state==0) {
CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
}
break;
}
return;
}
/**
* show_boot_progress: - indicate state of the boot process
*
* @param status: Status number - see README for details.
*
* The LOGOTRONIC does only have 2 LEDs, so we switch them on at the most
* important states (1, 5, 15).
*/
void show_boot_progress (int status)
{
if (status < -32) status = -1; /* let things compatible */
/*
switch(status) {
case 1: logodl_set_led(0,1); break;
case 5: logodl_set_led(1,1); break;
case 15: logodl_set_led(2,1); break;
}
*/
logodl_set_led(0, (status & 1)==1);
logodl_set_led(1, (status & 2)==2);
return;
}